E3S Web of Conf.
Volume 365, 2023IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
|Number of page(s)||9|
|Section||Mechanization, Electrification of Agriculture and Renewable Energy Sources|
|Published online||30 January 2023|
Automatic control of active ventilation systems in agricultural products storage facilities
1 Karshi State University, Karshi, Uzbekistan,
2 “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research university, 100000, Tashkent, Uzbekistan
* Corresponding author: firstname.lastname@example.org
The article recommends automatic control of active ventilation systems in agricultural product storage facilities. The search for rational solutions for ventilation, heating, and automatic control systems (ACS) that improve product storage quality and methods and means of storage is considered.
As a result of the analysis of the requirements for air-cooling storage units that operate for no more than 25 days per annual storage cycle, it was proved that refrigerating arrangements that are based on the principle of operation of vortex energy separators - vortex tubes (VT) meet these requirements most fully. In terms of temperature effect, the VT is inferior to the expander by 1.3 ... 1.5 times, in terms of cooling capacity by 3.0 ... 3.5 times. Compared to the throttling process, vortex tubes, when operating in air, are about 30 times better in terms of temperature effect and 15 times better in terms of cooling capacity.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.