Issue |
E3S Web Conf.
Volume 366, 2023
The 2021 International Symposium of the Society of Core Analysts (SCA 2021)
|
|
---|---|---|
Article Number | 01008 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/202336601008 | |
Published online | 27 January 2023 |
Monitoring fluid migration using in-situ nuclear magnetic resonance core flooding system integrated with fiber optic sensors: A proof of concept
1
School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia
2
CSIRO Energy Business Unit, Kensington, WA 6151, Australia
3
Currently at Fluid Science and Resources Division, Department of Chemical Engineering, University of Western Australia, Crawley, WA 6009, Australia
4
Currently at Center of Integrative Petroleum Research (CIPR), College of Petroleum Engineering & Geosciences, King Fahd University of Petroleum & Minerals, Saudi Arabia, Dhahran 31261, Saudi Arabia
* Corresponding author: bruno.falcao@msn.com
In-situ nuclear magnetic resonance (NMR) core flooding system has enabled researchers to monitor several rock properties such as porosity, pore size distribution, and fluid saturation along the tested samples with high resolutions and under reservoir conditions. However, spatially resolved rock strength/mechanical property alteration coupled to fluid migration/substitution remains poorly characterized. To this end, Fiber Bragg Grating (FBG) multiplex sensors were integrated with NMR core flooding system to monitor rock strength changes, or generally speaking, to observe hydro-mechanical-chemical coupling mechanisms during core flooding tests. In this study, we present a novel approach on how to conduct core flooding experiments, while simultaneously monitoring NMR and FBG strain response of the tested limestone plug. The NMR cell was modified to integrate FBG technology without impeding the NMR signal and core flooding high pressure/temperature capacity. A high spatial resolution optical fiber was attached onto the sample radial surface. The results show the successful association of NMR and FBG sensors to track any change at each stage of brine injection. The FBG is capable of measuring the rock strain variations induced by rock-fluid interactions during brine injection, allowing it to capture the fluid front location along with the sample and at a faster rate than the NMR.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.