| Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
|---|---|---|
| Article Number | 01019 | |
| Number of page(s) | 6 | |
| Section | I Environmental Risks and Safety in Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202337601019 | |
| Published online | 31 March 2023 | |
Virtual calculations for analyzing the operation of air spring
Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia
* Corresponding author: nbaurova@mail.ru
The 3D-model of an air spring for road vehicles is presented. A virtual calculation of the air spring has been carried out. Calculation results have been analyzed for adequacy by investigating grid deformation and checking pressure inside the rubber part of the air spring. The most dangerous places of the air spring are shown. Possibilities of LS-Dyna software package for engineering analysis are demonstrated. The influence of computer-aided design systems on modern engineering solutions is considered.
Key words: solidworks / ls-dyna / virtual calculation / anaerobic materials / road vehicles / air suspension / impregnating compounds
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.