| Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
|---|---|---|
| Article Number | 01020 | |
| Number of page(s) | 6 | |
| Section | I Environmental Risks and Safety in Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202337601020 | |
| Published online | 31 March 2023 | |
Evaluation of the influence of storage conditions of dispersed fillers on the properties of composites based on them
Moscow Automobile and Road Construction State Technical University (MADI), 64 Leningradsky Ave., 125319 Moscow, Russia
* Corresponding author: vwin14@mail.ru
The results of a study of the effect of storage conditions of dispersed fillers widely used in the repair of machines (mica, boron nitride, aluminum powder, carbon-containing powder) on the properties of composites based on them are presented. The results of the microstructure of the samples after exposure of the fillers under standard storage conditions, as well as high air humidity and a temperature drop, are presented.
Key words: dispersed fillers / polymer composite materials / high air humidity / temperature difference
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.