Open Access
Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
---|---|---|
Article Number | 04026 | |
Number of page(s) | 6 | |
Section | Mechanical Engineering and New Energy Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202338304026 | |
Published online | 24 April 2023 |
- V.N. Vinogradov, G.M. Sorokin, M.G. Kolokolnikov, Russ. abrasive wear (M.: Mechanical engineering, 1990) [Google Scholar]
- V.N. Vinogradov, G.M. Sorokin, M.G. Kolokolnikov, Izv. universities. Oil and gas 4, 69–73 (1981) [Google Scholar]
- H.T. Nurullaeva, O.A. Ortikov, Universum: technical sciences 12-3(93) (2021) [Google Scholar]
- F.K. Ibragimov, et al., Turk. J. of Computer and Math. Education (TURCOMAT) 12(7), 1107–1111 (2021) [CrossRef] [Google Scholar]
- I. Shin, Z. Shodmonqulov, S. Nazarov, N. Iskandarova, E3S Web of Conf. 304, 03033 (2021). https://doi.org/10.1051/e3sconf/202130403033 [CrossRef] [EDP Sciences] [Google Scholar]
- N.K. Iskandarova, Z.A. Shodmonkulov, I.G. Shin, Universum: technical sciences 6, 1(87), 45–50 (2021) [Google Scholar]
- Z.A. Shodmonkulov, N.K. Iskandarova, I.G. Shin, On the significance of the angle of attack of abrasive particles in a compressed air flow during the finishing of the teeth of the saw disc of graining machines. Collection of scientific papers of the International scientific conference dedicated to the 150th anniversary of the day the birth of Professor NA Vasiliev, pp. 129–133 (2021) [Google Scholar]
- I.G. Shin, Technological methods for ensuring the quality and predicting the durability of machine parts for the primary processing of cotton: Dis. … doc. tech. Sciences (Tashkent: TITLP, 2014) [Google Scholar]
- I.G. Shin, Z.A. Shodmonkulov, S.R. Nazarov, Analysis of the heat flows during the run-in and diamond burning of machine parts. Progressive Technologies and Processes, pp. 272–276 (2014) [Google Scholar]
- Z.A. Shodmonkulov, S.R. Nazarov, I.G. Shin, Schematization of load in the form of a uniformly distributed load over the area of a circle with static SPD. Modern instrumental systems, information technologies and innovations, pp. 295–297 (2015) [Google Scholar]
- Z.A. Shodmonkulov, I.G. Shin, Increasing The Performance Of Cotton Processing Machines By Diamond Burning Of The Working Shafts Of The Saw Cylinder. Innovations in metalworking: view of young specialists, pp. 360–362 (2015) [Google Scholar]
- Z.A. Shodmonkulov, et al., Evaluation of stored deformation energy under static surface-plastic deformation of masha parts. Modern instrumental systems, information technologies and innovations, pp. 171–174 (2014) [Google Scholar]
- E.N. Maslov, Theory of grinding materials (M.: Mashinostroenie, 1974) [Google Scholar]
- G.I. Granovsky, V.G. Granovsky, Metal cutting (M.: Higher School, 1985) [Google Scholar]
- I.J.A. Armarego, R.H. Brown, Processing of metals by cutting. Transl. from English. V.A. Pastunov (M.: Mashinostroenie, 1977) [Google Scholar]
- A.M. Vul'f, Metal cutting (M.: Mashinostroenie, 1973) [Google Scholar]
- V.K. Starkov, Dislocation ideas about metal cutting (M .: Mashinostroenie, 2009) [Google Scholar]
- Vinogradova N.V., Prokofiev M.A. Relationship between the latent energy of deformation and the technological conditions of mechanical processing. Uprochnyaya tekhnologii i pokrytiy. - Moscow, 2011. - No. 1. - P.3–7. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.