| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 01035 | |
| Number of page(s) | 8 | |
| Section | Agritechnologies and Environmental Engineering for Sustainable Environmental Health | |
| DOI | https://doi.org/10.1051/e3sconf/202339001035 | |
| Published online | 01 June 2023 | |
Improvement of housing with knives crushers for non-tillage technology
1 Karshi Institute of Irrigation and Agro technologies of the National Research University Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Karshi, 180119, Uzbekistan
2 Karshi Engineering Economic Institute, Karshi, 180100, Uzbekistan
* Corresponding author: ravshanovhamroqul@mail.ru
The paper gives justification of the options of the housing with crumbling knives for non-tillage technology. The dumpless housing with crumbles carries out intensive crumbling of the soil of the lower and middle arable soil layer. The body consists of a ploughshare, a ploughshare expander, knives and a chisel. When determining the parameters of a non-shaft housing based on a ploughshare, adopt a triangular wedge. Analytical dependences for determining the parameters of the components body without shaft are obtained. According conducted theoretical studies, without a tipper is 0. 45 m, entry angle the ploughshare on the soil is 25°, nook of installation relative to the direction of travel is 42°, corner of installation with respect to the bottom egate is 35°, grinder the blade quantity 4, the elevated is 35 mm, the longitude is 120-140 mm, the angle of installation regarding the direction of peregrinate is 10°, the installation related to the skyline is 30°, the height body sans a tipper is 420 mm processing is provided.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.