| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 01036 | |
| Number of page(s) | 7 | |
| Section | Agritechnologies and Environmental Engineering for Sustainable Environmental Health | |
| DOI | https://doi.org/10.1051/e3sconf/202339001036 | |
| Published online | 01 June 2023 | |
Placement of working bodies on the frame of the tool plow-ripper
1 Karshi engineering-economics institute, 225, Mustakillik str., Karshi, 180100, Uzbekistan
2 Karshi Institute of Irrigation and Agro technologies of the National Research University Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Karshi, 180119, Uzbekistan
* Corresponding author: d.b.irgashev1227@mail.ru
The purpose is to investigate substantiate relative position working bodies of improved plow-ripper. Scheme of the plow-ripper is given. The plow-ripper consists of the left and right sections, a ripping share established down the axle of symmetry tool, improved working bodies with inclined racks. Analytics dependencies are mined to define distance between working organs and the distance between them along the plow-ripper. Experiments have been carried out come true the relation stance working bodywork. Experiments have established that with an increase in the distance between the working bodies with an inclined stand along the plow, the hail of crumbling ground increasing accordance law of a convex edge and the pulling force in accordance law of a curved parabola. It has been determined that in order to ensure the reliability of work and the quality of tillage with a minimum traction resistance, the spacing should be at least 30 cm, and the distance between the working bodies along the plow-ripper should be 60 cm.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.