| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 04036 | |
| Number of page(s) | 5 | |
| Section | Green Technologies, Climate Change and Environmental Safety and Pollution | |
| DOI | https://doi.org/10.1051/e3sconf/202339004036 | |
| Published online | 01 June 2023 | |
Ripping paw tools for preparing the soil for planting
1 Karshi engineering-economics institute, 225, Mustakillik str., Karshi, 180100, Uzbekistan
2 Karshi Institute of Irrigation and Agro technologies of the National Research University Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Karshi, 180119, Uzbekistan
* Corresponding author: fmamatov_50@mail.ru
The paper discusses parameters of the loosening paw tool to prepare the soil the strip sowing of melons. Scheme of mutual arrangement of the paired housing and the ripper is given. Formulas were obtained for determining the depth of tillage, the width of the ripper and the degree of loosening of the soil, as well as the longitudinal distance between the body and the ripper. The experiments were carried out using the methods of strain measurement and multifactorial experiment. Experiments have established that with an increase in the width of the ripper, the degree of soil crumbling first increases and then decreases according to the law of the convex parabola, and the traction resistance decreases according to the law of the concave parabola. It was determined that to prepare the soil for strip sowing with a minimum traction resistance, the width of the ripper should be in the range of 18.70-20.37 cm, and the longitudinal distance from the ripper to the leaf housing is 42.87-43.57 cm.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.