| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 02040 | |
| Number of page(s) | 9 | |
| Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
| DOI | https://doi.org/10.1051/e3sconf/202340102040 | |
| Published online | 11 July 2023 | |
Reducing impact of embankment soils on shore support of bridge on the approaches to bridges
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: m.mehmonov90@mail.ru
The article defines the reduction of active ground pressure and amplitude-frequency characteristics by theoretical and practical studies on approaches to bridges by driving reinforced concrete piles into the embankment. Reinforced concrete piles were driven into the model of the roadbed, and vibrations were created using a vibrator mounted on piles. The frequency of these oscillations was 50 Hz, and the values of the oscillations were recorded at different points of the roadbed. Processing the obtained results made it possible to determine the distance between piles for different soils on the transition section reinforced with reinforced concrete piles. As a result, some of the vibrations in the roadbed are transmitted to the base using reinforced concrete piles. The amplitude-frequency characteristics (frequency response) of the vibrations of the embankment soils are decreasing.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.