Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 02039 | |
Number of page(s) | 8 | |
Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
DOI | https://doi.org/10.1051/e3sconf/202340102039 | |
Published online | 11 July 2023 |
Investigation of mechanical activation of steelmaking slag and obtaining fine filler
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: jumagul.turgunbayeva@mail.ru
The article presents the results of the mechanical activation of steel-smelting slag affecting the properties of the gypsum composition. As a result of the study, parameters were identified that characterize the reactivity of the slag during mechanical activation. It was established that the increase in the number of Bronsted active adsorption centers on the surface of the formed powders is responsible for their reactivity. However, the maximum increase in surface activity leads to a large percentage of residue on the sieve. Also, polynomial models were obtained that adequately describe the entire process of mechanical activation of waste from metallurgical production.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.