Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 03020 | |
Number of page(s) | 9 | |
Section | Road Construction, Building Structures and Materials | |
DOI | https://doi.org/10.1051/e3sconf/202340103020 | |
Published online | 11 July 2023 |
Influence of dispersion and content of mineral filler on the structure and properties of gypsum binder
Tashkent State Transport University, Tashkent, Uzbekistan
* Email: jumagul.turgunbayeva@mail.ru
The effect of dispersion on the structure and properties of gypsum binder and the content of mineral filler from industrial waste (15%) - crushed steel-smelting slag from the mass of gypsum binder was studied. With the introduction of the optimal amount of filler, in turn, it can significantly improve the macrostructure of the composite, increase the strength of the gypsum stone by 20%, despite the reduction in the consumption of gypsum binder up to 25%. At the same time, their strength characteristics are preserved, relative to the gypsum binder without filler. The resulting gypsum binder can be used in the manufacture of gypsum tongue-and-groove boards for the construction of partitions in rooms with normal humidity.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.