Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 05008 | |
Number of page(s) | 8 | |
Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202340105008 | |
Published online | 11 July 2023 |
Development of technology for obtaining polymer cement glue (PCG) with use of chemical additives and industrial waste
1 Tashkent State Transport University, Tashkent, Uzbekistan
2 “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, Uzbekistan
* Corresponding author: urinbekdj@mail.ru
The article presents the results of a study on the production of polymer cement glue with the use of chemical additives and industrial waste, as well as the influence of the amount and fineness of the filler grinding on the properties of polymer cement glue and the possibility of obtaining polymer cement glue PCG using water-soluble POLIMIX technology dry construction mix (DBM).
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.