| Issue |
E3S Web Conf.
Volume 417, 2023
III International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2023)
|
|
|---|---|---|
| Article Number | 06011 | |
| Number of page(s) | 7 | |
| Section | Infrastructure Problems of Mining Engineering, Transport, Electromechanics and Energy | |
| DOI | https://doi.org/10.1051/e3sconf/202341706011 | |
| Published online | 21 August 2023 | |
Force parameters of roller machines
Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
To facilitate the force analysis of the roller machine under consideration, the previously obtained model of the pattern of distribution of normal contact forces is approximated by an empirical dependence. The moduli of the main vector of elementary normal and tangential forces of each roll, the main moments of elementary forces relative to the axis of each roll are determined. It is revealed that the qualitative distribution pattern of normal contact forces gives the magnitude of forces and moments, expressed through the maximum of the normal force.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.