Issue |
E3S Web Conf.
Volume 583, 2024
Innovative Technologies for Environmental Science and Energetics (ITESE-2024)
|
|
---|---|---|
Article Number | 04007 | |
Number of page(s) | 7 | |
Section | Microwave, Laser, RF, UV and Solar Radiations | |
DOI | https://doi.org/10.1051/e3sconf/202458304007 | |
Published online | 25 October 2024 |
Influence of the heat accumulator’s storing capacity to increase the efficiency of helogreenhouses
1 Karshi Engineering Economics Institute, 180100, Karshi, Uzbekistan
2 Karshi State University, 180100, Karshi, Uzbekistan
* Corresponding author: bobur160189@mail.ru
The theoretical study carried out shows that the main geometric and energy characteristics of solar greenhouses are the coefficients of enclosure and heat accumulation. The influx of solar radiation depends little on the angle of incidence of the rays on transparent surfaces, and mainly depends on the surface area of the transparent fence. The amount of heat accumulated in a heat accumulator is determined by its heat-storing efficiency: material, ability to absorb solar radiation, volume, location. With sufficient mass values of the heat-storing elements, all or almost all of the solar energy captured by the heat-storing elements is usefully used, overheating in the greenhouse is eliminated, and daily fluctuations in air temperature in the greenhouse are smoothed out.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.