| Issue |
E3S Web Conf.
Volume 486, 2024
IX International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-IX 2023)
|
|
|---|---|---|
| Article Number | 06001 | |
| Number of page(s) | 9 | |
| Section | Agricultural Mechanization, Civil Engineering and Energetics | |
| DOI | https://doi.org/10.1051/e3sconf/202448606001 | |
| Published online | 07 February 2024 | |
Development of a device for restoration of the flowability of caked fertilizers with justification of its design and operating parameters
1 "Technologies of freight and commercial operations, stations and centres" department, Samara State Transport University (SSTU), Svobody Street 2V, Samara, 443066, Russia
2 Computer and Information Sciences Department, Povolzhskiy State University of Telecommunications and Informatics, Samara, 443010, Russia
3 Department of tractors, automobiles and technical mechanics, Federal State Budgetary Educational Institution of Higher Education “Kuban State Agrarian University named after I.T. Trubilin”, Krasnodar, 350044, Russia
4 Department of Mathematics, Moscow Polytechnic University, 38, Bolshaya Semenovskaya str., Moscow, 107023, Russia
5 Autonomous non-profit educational organization of higher professional education of the Tsentrosoyuz of the Russian Federation "Russian University of Cooperation" (Vladimir branch), Vladimir, 600000, Russia
* Corresponding author: alzolkin@list.ru
The article explores the possibility of use of a separate two-phase technology in agriculture to restore the flowability of caked mineral fertilizers. Flowability is one of the most important properties of fertilizers that determine their quality during storage and transportation. Flowability is understood as the property of a mineral fertilizer to flow freely under the influence of gravitational forces. Under certain environmental conditions, fertilizers may cake. To solve this problem in the preparation of fertilizers at agricultural enterprises, a new design of a preliminary grinder is proposed as a part of a two-phase technology. Based on the results of the experimental studies, the most rational design and operating parameters of the grinder have been determined. Practical recommendations on the possible use of the developed drum-type grinder for the destruction of other brittle materials in preparation for their introduction into the soil at agricultural enterprises are formulated.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.