Issue |
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
|
|
---|---|---|
Article Number | 07003 | |
Number of page(s) | 8 | |
Section | Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Physical and Numerical Modelling | |
DOI | https://doi.org/10.1051/e3sconf/202454407003 | |
Published online | 02 July 2024 |
Mesoscale FEM approach on cemented sands: Generating and testing the digital twin
1 Institute of Geotechnical Engineering and Construction Management, Hamburg University of Technology, Harburger Schlosssstrasse 36, 21079 Hamburg, Germany
2 Univ. Grenoble Alpes, Grenoble INP, CNRS, 3SR, F-38000, Grenoble, France
* Corresponding author: michail.komodromos@tuhh.de
The mechanics of Cemented Granular Material (CGM) have been studied by means of geotechnical experimental testing, whose output consists the basis of mathematical models which approach the material response in various loading states. The information derived from standard experimental response curves is the basis of understanding and handling the material. Still, it is intuitive to analyse the CGM down to the mesoscale and dray conclusions over the interaction of the constituent material phases. Diverging from the practice of equivalent continuum, the alternative description of a three phase composite of sand particles, cement binder and void pores has been realised in this study. In order to implement the specific morphology of this multiphase, geomaterial, X-ray Computed Tomography is used to capture the internal structure and quantify it into a three dimensional greyvalue map (or a three dimensional image). The distinction of the material phases is made possible by the application of a developed filter, which corrects the artefacts caused by beam hardening phenomena and allows for the generation of a phase segmented equivalent image. An image adapted meshing algorithm has been utilized to transform the labelled image into a tetrahedral mesh, grouped into sets that correspond to the different materials. The tetrahedral domain was assigned boundary conditions and was numerically tested under uniaxial compression using the finite element method. The kinematics of the simulation proved that the mesoscale approach, which carries internal structure information of the granular fabric and the cement paste distribution, provides a output which captures the kinematics of the granular skeleton.
Key words: cemented sand / X-ray CT / adapted image meshing algorithm / mesoscale FEM
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.