| Issue |
E3S Web Conf.
Volume 613, 2025
XI International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-XI 2025)
|
|
|---|---|---|
| Article Number | 04002 | |
| Number of page(s) | 7 | |
| Section | Agricultural Mechanization and Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202561304002 | |
| Published online | 07 February 2025 | |
Shapes of contact curves of squeezing rolls
1 Tashkent University of Architecture and Civel Engineering, Tashkent, Uzbekistan
2 Tashkent State University of Economics, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@email.ru
Mathematical models of the shape of the contact curves of the squeezing rolls are obtained. Based on the analysis of the phenomenon of interaction and filtration of moisture in the squeezing module, calculation formulas are obtained for determining the ratio of the deformation rates of the contacting bodies. It is revealed that with an increase in the thickness of the material, the ratio of the deformation rates during compression increases. It is established that an increase in the thickness of the roll coating leads to an increase in the ratio of the deformation rates during compression.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.