| Issue |
E3S Web Conf.
Volume 613, 2025
XI International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-XI 2025)
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 7 | |
| Section | Agricultural Mechanization and Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202561304003 | |
| Published online | 07 February 2025 | |
Technological efficiency of the squeezing process
Tashkent University of Architecture and Civel Engineering, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@email.ru
A theoretical model of residual moisture of the processed material has been developed, which allows obtaining reliable parameters of the squeezing process and assessing the technological efficiency of the squeezing process. It has been established that with an increase in the roller radius, the thickness of the contacting bodies and a decrease in the ratio of deformation of the contacting bodies, the residual moisture increases. It has been revealed that a decrease in the coefficient of deformation of the roller coating and an increase in the coefficient of deformation of the processed material lead to a decrease in residual moisture.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.