| Issue |
E3S Web Conf.
Volume 655, 2025
International Conference on Chemical and Material Engineering in conjunction with the International Symposium on Applied Chemistry (ICCME-ISAC 2025)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 4 | |
| Section | Chemical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202565501001 | |
| Published online | 27 October 2025 | |
Investigation of Factors Affecting the Kinetics of Gold Heap Leaching
Department of Mining, Tashkent State Technical University, 100098, Tashkent, Uzbekistan
* Corresponding author: sohibsd2010@mail.ru
The present study investigates the influence of reagent concentrations and the presence of impurities on the kinetics of gold heap leaching. Of particular note is the focus on the role of cyanide concentration and the effects of metallic impurities in the leach solution. The analytical results obtained confirmed the presence of accompanying metals, including copper, iron, zinc, and lead, in the productive solution. These metals have the capacity to form complexes with cyanide, thus competing with gold for the reagent and potentially affecting the efficiency of the leaching process. The experimental data demonstrated that, at comparatively low concentrations of sodium cyanide, the dissolution rate of gold is directly proportional to the cyanide concentration. However, as the cyanide concentration increases beyond a certain threshold, the rate of gold dissolution becomes limited by the availability of dissolved oxygen. This shift in rate-controlling mechanisms underscores the dual importance of both cyanide and oxygen in optimizing gold recovery. It was further established that maintaining a minimum sodium cyanide concentration of 80 mg/l in the productive solution is essential for ensuring a consistent leaching rate and for preventing the accumulation of metallic impurities that can interfere with downstream processes, including gold precipitation.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.

