Open Access
Issue |
E3S Web Conf.
Volume 32, 2018
EENVIRO 2017 Workshop - Advances in Heat and Transfer in Built Environment
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/20183201001 | |
Published online | 21 February 2018 |
- European Union, Directive 2012/27/EU of the European parliament and of the council efficiency Official Journal of the European Union, 25-Oct-2012, http://eurlex.europa.eu/LexUriServ/LexUriServ.do? uri=OJ:L:2012:315:0001:0056:en:PDF. [Google Scholar]
- Hughes BR, CalautitJK, GhaniSA. The development of commercial wind towers for natural ventilation: a review. Applied Energy 2012; 92: 606–627. http://dx.doi.org/10.1016/j.apenergy.2011.11.066. [CrossRef] [Google Scholar]
- Balaras, C. Heat Attenuation: in Passive Cooling of Buildings Ed. Santamouris, M and Asimakopoulous, D. (1996) Science Publishers, London. [Google Scholar]
- IPCC Climate Change 2014: Impacts, Adaptation, and Vulnerability - Chapter 8 Urban Areas. (2014) Online: http://www.ipcc.ch/pdf/assessmentreport/ ar5/wg2/WGIIAR5-Chap8_FINAL.pdf.Accessed10/10/2017. [Google Scholar]
- Liu, C. and Coley, D. Overheating risk of UK dwellings under a changing climate. 6th International Building Physics Conference, IBPC 2015. Energy Procedia 78 (2015) 2796 - 2801 available online: http://www.sciencedirect.com/science/article/pii/S18 76610215023607accessed10-10-2017 [Google Scholar]
- Hamdy. M., Carlucci, S., Hoes, P., and Hensen, J. The impact of climate change on the overheating risk in dwellings - A Dutch case study. Building and Environment 122. Pages 307-323. (2017) [CrossRef] [Google Scholar]
- Zero Carbon Hub ASSESSING OVERHEATING RISK LEAFLET. Zero Carbon Hub. (2016) Online:http://www.zerocarbonhub.org/sites/default/f iles/resources/reports/ZCH-OverheatingLeaflet-3-Modelling-S.pdfaccessed:10/10/2017. [Google Scholar]
- Metoffice. Too hot, too cold, too wet, too dry: Drivers and impacts of seasonal weather in the UK. (2014) Availableonline:https://www.metoffice.gov.uk/binar ies/content/assets/mohippo/pdf/4/8/drivers_and_imp acts_of_seasonal_weather_in_the_uk.pdf.Accessed01/10/2017. [Google Scholar]
- Eicker, U. Passive Cooling Strategies: In: Low-Energy Cooling for Sustainable Buildings. Wiley, UK. (2009) [Google Scholar]
- Balaras, C (1996) Heat Attenuation: in Passive Cooling of Buildings Ed. Santamouris, M and Asimakopoulous, D. Science Publishers, London. [Google Scholar]
- Derradji, L., Errebaia F.B.,Amara, M., Effect of PCM in Improving the Thermal Comfort in Buildings. (2016) Energy Procedia 107 (2017) 157 – 161. [CrossRef] [Google Scholar]
- Auzeby, M., Wei,S. Underwood, C., Chen, C., Ling,H., Pan,S., Bobo N., Tindall, J., Buswell,R., Using phase change materials to reduce overheating issues in UK residential buildings. Energy Procedia 105 (2017) 4072 – 4077 [CrossRef] [Google Scholar]
- Nghana, B., and Tariku, F.) Phase change material’s (PCM) impacts on the energy performance and thermal comfort of buildings in a mild climate. Building and Environment: Volume 99, April 2016, Pages 221-238. [CrossRef] [Google Scholar]
- Derradji, L., Errebaia F.B.,Amara, M., Effect of PCM in Improving the Thermal Comfort in Buildings. Energy Procedia 107 (2017) 157 – 161. [CrossRef] [Google Scholar]
- Solgi, E., Fayaz, R., Kari, B.Z., Cooling load reduction in office buildings of hot-arid climate, combining phase change materials and night purge ventilation. Renewable Energy, Volume 85, January 2016, Pages 725-731 [CrossRef] [Google Scholar]
- Álvarez, S., Cabeza, L.F., Ruiz-Pardo, A., Castell, A., Tenorio, J.S. Building integration of PCM for natural cooling of buildings. Applied Energy Volume 109, September 2013, Pages 514-522. [CrossRef] [Google Scholar]
- Souayfane,F. Fardoun, F. Biwole, P. Phase change materials (PCM) for cooling applications in buildings: A review. Energy and Buildings, Volume 129, 1 October 2016, Pages 396-431. [Google Scholar]
- Liu, S. and, Li, Y. An experimental study on the thermal performance of a solar chimney without and with PCM. Renewable Energy, Volume 81, 2015, Pages 338–346. [CrossRef] [Google Scholar]
- Iten, M. Liu, S., and Shukla, A. A review on the air-PCM-TES application for free cooling and heating in the buildings. Renewable and Sustainable Energy Reviews. Volume 61, 2016, Pages 175-186. [Google Scholar]
- Roel C.G.M. Loonen, Fabio Favoino, Jan L.M. Hensen & Mauro Overend. Review of current status, requirements and opportunities for building performance simulation of adaptive facades. Journal of Building Performance Simulation, (2016): DOI: 10.180/19401493.2016.1152303. [Google Scholar]
- Roel C.G.M. Loonen, Fabio Favoino, Jan L.M. Hensen & Mauro Overend. Review of current status, requirements and opportunities for building performance simulation of adaptive facades. Journal of Building Performance Simulation, (2016): DOI: 10.1080/19401493.2016.1152303. [Google Scholar]
- Crawley, D., J. Hand, M. Kummert, and B. Griffith. “Contrasting the Capabilities of Building Energy Performance Simulation Programs.” 2008. Building and Environment 43 (4): 661–673. doi:10.1016/j.buildenv.2006.10.027. [Google Scholar]
- Moss.K.J. Heat and Mass Transfer in Buildings: Chaper 7 Heat Radiation. Second Editio. Taylor and Francis, Oxon. 2007. [Google Scholar]
- PCM Product Ltd. PlusICETM Phase Change Materials Passive Cooling. Available Online: http:// www.pcmproducts.net/files/Passive%20Cooling%20Catalogue.pdf [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.