Open Access
| Issue |
E3S Web Conf.
Volume 65, 2018
International Conference on Civil and Environmental Engineering (ICCEE 2018)
|
|
|---|---|---|
| Article Number | 05003 | |
| Number of page(s) | 10 | |
| Section | Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/20186505003 | |
| Published online | 26 November 2018 | |
- Gerard Lligadas, Juan C. Ronda, Marina Galià, Virginia Cádiz, Renewable polymeric materials from vegetable oils: a perspective, Material Today Volume 16, Issue 9, Pages 337-343 (September 2013) [CrossRef] [Google Scholar]
- C. Baillie, Green Composites: Polymer Composites and the Environment, Woodhead Publishing, 2004 [Google Scholar]
- Negishia H., Nishida M., Endo Y., and Fujimoto K., “Effect of a Modified Deep-Fat Fryer on Chemical and Physical Characteristics of Frying Oil” Journal of American Oil Chemists, Jan (163-166) 2003 [CrossRef] [Google Scholar]
- Sundance Renewables: http://www.sundancerenewables.org.uk/biodp/uvo.htm, (Oct. 2005) [Google Scholar]
- Booth E., Bell J., and Mcgovern R., SAC Consultancy Division, Hodsman L., National Non- Food Crops Centre, “Review of the Potential for On-Farm Processing of Various Non-Food Crop Products”, NNFCC, (May 2007) [Google Scholar]
- Kilpatrick J., ADAS UK Ltd, “West Midlands Non-Food Crops Opportunities/Mapping Study”, Advantage West Midlands, Oct. (2007) [Google Scholar]
- Calais P. and Clark A. R., “Waste Vegetable Oil as a Diesel Replacement Fuel”, http://www.shortcircuit.com.au/warfa/paper/paper.htm and http://www.energysavingnow.com, (2000) [Google Scholar]
- ASTM C 136-96a BS 1337 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates [Google Scholar]
- ASTM C127-88 & C128-88 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate [Google Scholar]
- ASTM C39/C 39MM-14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens (2009) [Google Scholar]
- ASTM C67-03a ASTM C 67- 03a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile, (2009) [Google Scholar]
- ASTM D4843 - 88, Standard Test Method for Wetting and Drying Test of Solid Wastes (2009) [Google Scholar]
- ASTM C 512-02 Standard Test Method for Creep of Concrete in Compression [Google Scholar]
- Standard Methods for the analysis of oils, fats and derivatives, Method 2.301 and 2.302 [Google Scholar]
- Srinivasa Reddy V, Rajaratnam V, Seshagiri Rao M V, Sasikala Ch, Mathematical Model for Predicting Stress-Strain Behaviour of Bacterial Concrete, International Journal of Engineering Research and Development, Volume 5, Issue 11 (February 2013), PP. 21-29] [Google Scholar]
- T. Heaton, C. Sammon, J. Ault, L. Black, J.P. Forth, Masonry units bound with waste vegetable oil - Chemical analysis and evaluation of engineering properties, Construction and Building Materials 64, 460-472 (2014) [CrossRef] [Google Scholar]
- Meilunas R.J, Bentsen J.G, Steinberg A. Analysis of aged paint binders by FTIR spectroscopy. Stud Conserv; 35(1):33-51. (1990) [Google Scholar]
- Mallegol J, Gonon L, Lemaire J, Gardette JL. Long-term behaviour of oil-based varnishes and paints-Influence of film thickness on the photooxidation. Polym Degrad Stabil; 72(2):191-7 (2001) [CrossRef] [Google Scholar]
- Smith B. Infrared spectral interpretation: a systematic approach. 1st ed. CRC Press; (1999) [Google Scholar]
- Socrates G. Infrared and Raman characteristic group frequencies. Table’s and charts. 3rd ed. Wiley; (2001) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.