An Investigation of a Nonlinear Fuel Oil Viscosity and Temperature Control System for Ships

Zhuohang Ye; Xiaobing Mao; Hai Huang; Xianzhen Liu

doi:10.1051/e3sconf/20199503006

All issues

Volume 95 (2019)

E3S Web Conf., 95 (2019) 03006

References

Open Access

Issue		E3S Web Conf. Volume 95, 2019 The 3^rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)


Article Number		03006
Number of page(s)		5
Section		Control System
DOI		https://doi.org/10.1051/e3sconf/20199503006
Published online		13 May 2019

Ishijima, Takashi and Shimada, Akiko, “An analysis of ring temperature, oil film temperature, oil film thickness and heat transfer on a pistion ring of an IC engine in consideration of ring movement in a cycle,” 2017 International Conference on the ASME Internal Combution Engine Division, pp. 665–676 (2017) [Google Scholar]
S. Tong, Y. Li, J. Ren and Y. Zhang, “PID control of air tank temperature system with parameters tuning through network,” 2015 International Conference on Advanced Mechatronic Systems (ICAMechS), Beijing, pp. 233–237(2015) [Google Scholar]
Wang Fenghua, Zhou xiang, Gao pei and Xi Xiaoguang, “Improved thermal circuit model of hot spot temperature in oil-immersed transformers based on heat distribution of winding,” High Voltage Engineering, vol. 41, no. 3, pp. 895–901(2015) [Google Scholar]
U. M. Nath, C. Dey and R.K. Mudi, “Model identification of coupled-tank system — MIMO process,” 2017 Second International Conference on Electrical, Computer and Communication Technologies (ICECCT), Coimbatore, pp. 1–6(2017) [Google Scholar]
Wu Sijie, Simulation Study of the Fuel Oil Viscosity Control System for Marine Diesel Engine [J], Journal of Jimei University (Natural Science), vol. 5,354–359(2013) [Google Scholar]
Sun huijuan and Li huazhou, “Coupling heat and mass transfer for a gas mixture-heavy oil system at high pressures and elevated temperatures,” International Journal of Heat and Mass Transfer, vol. 74, 173–184(2014) [Google Scholar]
S. Kasera, A. Kumar and L. B. Prasad, “Analysis of chattering free improved sliding mode control,” 2017 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS), Coimbatore, India, pp. 1–6(2017) [Google Scholar]
M. Navabi and H. Mirzaei, “θ-D based nonlinear tracking control of quadcopter,” 2016 4th International Conference on Robotics and Mechatronics (ICROM), Tehran, pp. 331–336(2016) [Google Scholar]
V. K. Pandey, I. Kar and C. Mahanta, “Controller design for a 3-DOF helicopter using multiple models with second level adaptation,” 2017 Indian Control Conference (ICC), Guwahati, pp. 99–104(2017) [Google Scholar]
Qin Hong, Li Weiwei and Zhang Lidong, “Temperature distribution during pre-heating process in a 0.12t/d oil shale retorting reactor,” Acta Petrolei Sinica(Petroleum Processing Section), vol. 32, 921–929(2016) [Google Scholar]
Akhlaghinia, Manoochehr and Torabi, “ Experimental and simulation studies of heavy oil/water relative permeability curves: Effect of temperature,” Special Topics and Reviews in Porous Media, vol. 4, 99–109(2013) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Ishijima, Takashi and Shimada, Akiko, “An analysis of ring temperature, oil film temperature, oil film thickness and heat transfer on a pistion ring of an IC engine in consideration of ring movement in a cycle,” 2017 International Conference on the ASME Internal Combution Engine Division, pp. 665–676 (2017) [Google Scholar]

[2] S. Tong, Y. Li, J. Ren and Y. Zhang, “PID control of air tank temperature system with parameters tuning through network,” 2015 International Conference on Advanced Mechatronic Systems (ICAMechS), Beijing, pp. 233–237(2015) [Google Scholar]

[3] Wang Fenghua, Zhou xiang, Gao pei and Xi Xiaoguang, “Improved thermal circuit model of hot spot temperature in oil-immersed transformers based on heat distribution of winding,” High Voltage Engineering, vol. 41, no. 3, pp. 895–901(2015) [Google Scholar]

[4] U. M. Nath, C. Dey and R.K. Mudi, “Model identification of coupled-tank system — MIMO process,” 2017 Second International Conference on Electrical, Computer and Communication Technologies (ICECCT), Coimbatore, pp. 1–6(2017) [Google Scholar]

[5] Wu Sijie, Simulation Study of the Fuel Oil Viscosity Control System for Marine Diesel Engine [J], Journal of Jimei University (Natural Science), vol. 5,354–359(2013) [Google Scholar]

[6] Sun huijuan and Li huazhou, “Coupling heat and mass transfer for a gas mixture-heavy oil system at high pressures and elevated temperatures,” International Journal of Heat and Mass Transfer, vol. 74, 173–184(2014) [Google Scholar]

[7] S. Kasera, A. Kumar and L. B. Prasad, “Analysis of chattering free improved sliding mode control,” 2017 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS), Coimbatore, India, pp. 1–6(2017) [Google Scholar]

[8] M. Navabi and H. Mirzaei, “θ-D based nonlinear tracking control of quadcopter,” 2016 4th International Conference on Robotics and Mechatronics (ICROM), Tehran, pp. 331–336(2016) [Google Scholar]

[9] V. K. Pandey, I. Kar and C. Mahanta, “Controller design for a 3-DOF helicopter using multiple models with second level adaptation,” 2017 Indian Control Conference (ICC), Guwahati, pp. 99–104(2017) [Google Scholar]

[10] Qin Hong, Li Weiwei and Zhang Lidong, “Temperature distribution during pre-heating process in a 0.12t/d oil shale retorting reactor,” Acta Petrolei Sinica(Petroleum Processing Section), vol. 32, 921–929(2016) [Google Scholar]

[11] Akhlaghinia, Manoochehr and Torabi, “ Experimental and simulation studies of heavy oil/water relative permeability curves: Effect of temperature,” Special Topics and Reviews in Porous Media, vol. 4, 99–109(2013) [CrossRef] [Google Scholar]