Open Access
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
Article Number 04031
Number of page(s) 9
Section Reliability of Buildings and Constructions
Published online 29 May 2019
  1. A. Pena, M. Valenzuela, M. Marquez, H. Pinto, Minimum geotechnical requirements for traditional and singular bridges foundations design: Chacao Suspension Bridge. Revista de la Construcción, 16 (3), pp.498-505 (2017) [CrossRef] [Google Scholar]
  2. D. Sobala, J. Rybak, Role to be played by independent geotechnical supervision in the foundation for bridge construction, IOP Conf. Ser.: Mat. Science and Eng., 245 (2), 022073, (2017) [CrossRef] [Google Scholar]
  3. J. Rybak, D. Sobala, G. Tkaczynski, Static and dynamic testing of driven piles in Poland, 8th int. conf., Lisbon, Portugal, 8-10 September 2008, Amsterdam: IOS Press, 615-618, (2008) [Google Scholar]
  4. P. Rychlewski, Przemieszczenia fundamentów obiektów inżynierskich, Inżynier Budownictwa, 4, (2017) [Google Scholar]
  5. EN 1997-2: Eurocode 7: Geotechnical design Part 2: Ground investigation and testing [Google Scholar]
  6. M. Bouassida, I. Said, About estimation of settlement by the oedometric and pressuremeter methods, 2nd Int. Conf. on Geotech. Eng. October 25-27, Hammamet Tunisia, 1, 777-786, (2010) [Google Scholar]
  7. M. Drusa, Improvement in evaluation of neogenous soils by CPT testing, 12th Int. Multidisciplinary Scientific GeoConf. and EXPO Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012, 2, 151-158, (2012) [Google Scholar]
  8. J. Vlcek, R. Bulko, L. Bartuška, J. Kmec, Soil Consolidation Parameters Derived from CPTu Probing, Procedia Engineering, 161, 180–184, (2016) [Google Scholar]
  9. I. Bagińska, M. Wyjadłowski, M. Sacha, Study of the results of static CPTu test for capacity calculation of the pile. 17th Int. Multidisciplinary Scientific GeoConf., SGEM 2017, Albena, Bulgaria, 17 (12), 825-832, (2017) [Google Scholar]
  10. M. Wyjadłowski, I. Bagińska, J. Rainer, Probabilistic assessment of pile capacity based on CPTu probing including random pile foundation depth, MATEC Web Conf., 196, 01058, (2018) [CrossRef] [Google Scholar]
  11. Y.M.A. Hashash, H. Song, The Integration of Numerical Modeling and Physical Measurements through Inverse Analysis in Geotechnical Engineering, KSCE Journal of Civil Engineering, 12 (3), 165-176, (2008) [CrossRef] [Google Scholar]
  12. P. Popielski, Weryfikacja parametrów podłoża na podstawie wykonanej analizy wstecznej przy realizacji głębokich posadowień w Warszawie. Archit., 12 (2), (2013) [Google Scholar]
  13. EN 1997-1, Eurocode 7: Geotechical design – Part 1: General rules. [Google Scholar]
  14. H.G. Poulos, E.H. Davis, Pile foundation analysis and design, Rainbrow-Bridge Book Co., (1980) [Google Scholar]
  15. D. Sobala, G. Tkaczyński, Interesting Developments in Testing Methods Applied to Foundation Piles, IOP Conf. Ser.: Mat. Science and Eng., 245 (2), 022074, (2017) [CrossRef] [Google Scholar]
  16. J. Rybak, M. Król, Limitations and risk related to static capacity testing of piles – “unfortunate case” studies, MATEC Web Conf., 146, 02006, (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  17. K. Gwizdała, A. Krasiński, Fundamenty palowe, obliczenia z zastosowaniem zasad Eurokodu 7 i doświadczeń krajowych. Acta Sci. Pol. Architektura, 15 (2), (2016) [Google Scholar]
  18. Zhang Qianging, Shucai Li, Fayun Liang, Min Yang, Qian Zhang, Simplified method for settlement prediction of single pile and pile group using hyperbolic model International Journal of Civil Engineering, Geotechnique, 146-159 (2013) [Google Scholar]
  19. G. Varga, Z. Czap, Soil Models: Safety factors and settlements, Periodica Polytechnica Ser. Civ. Eng. 48 (1–2), 53–63, (2004) [Google Scholar]
  20. E. Dembicki, M. Cudny, A. Krasiński, K. Załęski, Pylon foundation of a cable stayed bridge at motorway ring road of Wrocław. 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, 4, 2715-2718, (2013) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.