Open Access
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
Article Number 01075
Number of page(s) 7
Section Advanced HVAC&R&S Technology
Published online 13 August 2019
  1. K.-N. Rhee and K.W. Kim, A 50 year review of basic and applied research in radiant heating and cooling systems for the built environment. Build Environ, 91, 166–190 (2015) [Google Scholar]
  2. A.-J. N. Khalifa, Natural convective heat transfer coefficient – a review I. Isolated vertical and horizontal surfaces. Energy Convers Manag, 42, 491–504 (2001) [CrossRef] [Google Scholar]
  3. A.-J. N. Khalifa, Natural convective heat transfer coefficient – a review: II. Surfaces in two- and three-dimensional enclosures. Energy Convers Manag, 42 (4), 505–517 (2001) [Google Scholar]
  4. J. Babiak, B.W. Olesen, D. Petras, Low temperature heating and high temperature cooling, REHVA Guidebook no. 7. (2009) [Google Scholar]
  5. EN1264-5 Water based surface embedded heating and cooling systems – Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output, CEN (2008) [Google Scholar]
  6. EN15377-1 Heating systems in buildings – Design of embedded water based surface heating and cooling systems – Part 1: Determination of the design heating and cooling capacity, CEN (2008) [Google Scholar]
  7. ISO11855-2 Building environment design – Design, dimensioning, installation and control of embedded radiant heating and cooling systems – Part 2: Determination of the design heating and cooling capacity, International Organization for Standardization (2012) [Google Scholar]
  8. ASHRAE, ASHRAE Handbook – HVAC Systems and Equipment, (2012) [Google Scholar]
  9. S. Okamoto, H. Kitora, H. Yamaguchi, T. Oka, A simplified calculation method for estimating heat flux from ceiling radiant panels. Energy Build, 42 (1), 29–33 (2010) [Google Scholar]
  10. Y. Yuan, X. Zhang, X. Zhou, J. Gao, An experiment-oriented simulation method for cooling capacity determination of cooling ceiling radiant panel system. Sci Technol Built Environ, 22 (6), 831–844 (2016) [Google Scholar]
  11. O. Acikgoz, O. Kincay, Experimental and numerical investigation of the correlation between radiative and convective heat-transfer coefficients at the cooled wall of a real-sized room. Energy Build, 108, 257–266 (2015) [Google Scholar]
  12. L. Zhang, X.-H. Liu, Y. Jiang, Experimental evaluation of a suspended metal ceiling radiant panel with inclined fins. Energy Build, 62, 522–529. (2013) [Google Scholar]
  13. M. Andrés-Chicote, A. Tejero-González, E. Velasco-Gómez, F. J. Rey-Martínez, Experimental study on the cooling capacity of a radiant cooled ceiling system. Energy Build, 54, 207–214 (2012) [Google Scholar]
  14. F. Causone, S. P. Corgnati, M. Filippi, B.W. Olesen, Experimental evaluation of heat transfer coefficients between radiant ceiling and room. Energy Build, 41 (6), 622–628 (2009) [Google Scholar]
  15. T. Cholewa, R. Anasiewicz, A. Siuta-Olcha, M. A. Skwarczynski, On the heat transfer coefficients between heated/cooled radiant ceiling and room. Appl Therm Eng, 117, 76–84 (2017) [Google Scholar]
  16. T. Cholewa, M. Rosiński, Z. Spik, M. R. Dudzińska, A. Siuta-Olcha, On the heat transfer coefficients between heated/cooled radiant floor and room. Energy Build, 66, 599–606 (2013) [Google Scholar]
  17. A. Koca, G. Çetin, Experimental investigation on the heat transfer coefficients of radiant heating systems: Wall, ceiling and wall-ceiling integration. Energy Build, 148, 311–326 (2017) [Google Scholar]
  18. A. Koca, Z. Gemici, Y. Topacoglu, G. Cetin, R. C. Acet, B. B. Kanbur, Experimental investigation of heat transfer coefficients between hydronic radiant heated wall and room. Energy and Buildings, 82, 211–221 (2014) [Google Scholar]
  19. Y. Yuan, X. Zhang, X. Zhou, Simplified correlations for heat transfer coefficient and heat flux density of radiant ceiling panels. Sci Technol Built Environ, 23 (2), 251–263 (2017) [Google Scholar]
  20. J. Miriel, L. Serres, A. Trombe, Radiant ceiling panel heating–cooling systems: experimental and simulated study of the performances, thermal comfort and energy consumptions. Appl Therm Eng, 22 (16), 1861–1873 (2002) [Google Scholar]
  21. H. B. Awbi, A. Hatton, Natural convection from heated room surfaces. Energy and Buildings, 30 (3), 233–244 (1999) [Google Scholar]
  22. R. Karadağ, New approach relevant to total heat transfer coefficient including the effect of radiation and convection at the ceiling in a cooled ceiling room. Appl Therm Eng, 29 (8), 1561–1565 (2009) [Google Scholar]
  23. B. W. Olesen, E. Michel, F. Bonnefoi, M. De Carli, Heat exchange coefficient between floor surface and space by floor cooling - theory or a question of definition, ASHRAE Trans, 106, 684–694 (2000). [Google Scholar]
  24. M. F. Evren, A. Özsunar, A. Biyikoglu, B. Kilkis, Determination of heat transfer coefficient between heated floor and space using the principles of ANSI/ASHRAE standard 138 test chamber, ASHRAE Tans, 123, 71–81 (2017) [Google Scholar]
  25. T. C. Min, L. F. Schutrum, G. V. Parmelee, J. D. Vouris, Natural convection and radiation in a panel heated room, ASHRAE Trans, 62, 337–358 (1956) [Google Scholar]
  26. R. Karadağ, The investigation of relation between radiative and convective heat transfer coefficients at the ceiling in a cooled ceiling room. Energy Convers Manag, 50 (1), 1–5 (2009) [Google Scholar]
  27. O. Acikgoz, A novel evaluation regarding the influence of surface emissivity on radiative and total heat transfer coefficients in radiant heating systems by means of theoretical and numerical methods. Energy Build, 102, 105–116 (2015) [Google Scholar]
  28. J.-W. Jeong, S. A. Mumma, Ceiling radiant cooling panel capacity enhanced by mixed convection in mechanically ventilated spaces. Appl Therm Eng, 23, 2293–2306 (2003) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.