EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 121 (2019) E3S Web Conf., 121 (2019) 01017 References
Open Access
Issue
E3S Web Conf.
Volume 121, 2019
I International Conference “Corrosion in the Oil and Gas Industry”
Article Number 01017
Number of page(s) 4
Section Corrosion Monitoring
DOI https://doi.org/10.1051/e3sconf/201912101017
Published online 14 October 2019
  1. Koyama M. et al. Hydrogen desorption and cracking associated with martensitic transformation in Fe-Cr-Ni-Based austenitic steels with different carbon contents, IJHE 42, 42, 26423-26435 (2017) [Google Scholar]
  2. Nie Y. et al. Hydrogen embrittlement of a 1500-MPa tensile strength level steel with an ultrafine elongated grain structure, Metall. Mater. Trans. A 43, 5, 1670-1687 (2012) [CrossRef] [Google Scholar]
  3. Belyaev A.K. et al. Multichannel diffusion vs TDS model on example of energy spectra of bound hydrogen in 34CrNiMo6 steel after a typical heat treatment, IJHE 41, 20, 8627-8634 (2016) [Google Scholar]
  4. Polyanskii A.M., Polyanskii V.A., Yakovlev Yu.A. Metrological Assurance of Measurement of Hydrogen Concentration in Metals–a Basis for Safety in the Oil and Gas Industry, METE 56, 3, 328-333 (2013) [Google Scholar]
  5. Szilard J., Haynes R. Ultrasonic detection of hydrogen embrittlement in free-cutting mild steel, Br. J. NDT 22, 3, 128 (1980) [Google Scholar]
  6. Senior P., Szilard J. Ultrasonic detection of hydrogen in pipeline steel, Ultrasonics 22, 1, 42-44 (1984) [Google Scholar]
  7. Benson R.W., Raelson V.J. From ultrasonics to a new stress-analysis technique, Prod.Eng. 30, 29, 56-59 (1959) [Google Scholar]
  8. Toupin R.A., Bernstein B. Sound waves in deformed perfectly elastic materials. Acoustoelastic effect, J. Appl. Mech. 33, 2, 216-225 (1961) [Google Scholar]
  9. Johnson G.C. On the applicability of acoustoelasticity for residual stress determination, J. Appl. Mech. 48, 791-795 (1981) [Google Scholar]
  10. Nikitina N.E., Kamyshev A.V., Kazachek S.V. The application of the acoustoelasticity method for the determination of stresses in anisotropic pipe steels, RJNDT 51, 3, 171-178 (2015) [Google Scholar]
  11. Belyaev A.K. et al. Propagation of sound waves in stressed elasto-plastic material, IEEE (DD) 56-61 (2016) [Google Scholar]
  12. Belchenko V.K. et al. An estimation of the strain-stress state under cyclic loading by the acoustoelasticity method, SPb Phys Math J 3, 1, 71-76 (2017) [Google Scholar]
  13. Hughes D.S., Kelly J.L. Second-order elastic deformation of solids, Phys.Rev. 92, 5, 1145 (1953) [CrossRef] [Google Scholar]
  14. Belyaev A.K. et al. Investigation of the correlation between acoustic anisotropy, damage and measures of the stress-strain state, PROSTR 6, 201-207 (2017) [Google Scholar]
  15. Belyaev A.K. et al. Estimating the plastic strain with the use of acoustic anisotropy, Mech.Sol. 51, 5, 606-611 (2016) [CrossRef] [Google Scholar]
  16. Semenov A.S. et al. Effect of Surface Layer Damage on Acoustic Anisotropy, JAMT 59, 6, 1136-1144 (2018) [Google Scholar]
  17. Alekseeva E.L. et al. A study of hydrogen cracking in metals by the acoustoelasticity method, AIP Publishing 1915, 1, 030001 (2017) [Google Scholar]
  18. Alhimenko A.A. et al. Propagation of acoustic waves during the control of hydrogen-induced destruction of metals by the acoustoelastic effect, IEEE (DD) 11-16 (2018) [Google Scholar]
  19. Alekseeva E.L. et al. Evaluation of stress-strain state and cracking of weatherproof structural steel by acoustoelasticity, CUBS 12, 33-44 (2016) [Google Scholar]
  20. Hernandez-Valle F., Clough A.R., Edwards R.S. Stress corrosion cracking detection using non-contact ultrasonic techniques, Corrosion Science 78, 335-342 (20-14) [Google Scholar]
  21. NACE Standard TM0284-2003 Test Method. Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking, NACE International, Houston, TX (2011) [Google Scholar]
  22. Polyanskiy V.A. et al. Influence of the skin effect of plastic deformation on hydrogen accumulation in metals AIP Publishing 2053, 1, 020011 (2018) [Google Scholar]
  23. Belyaev A.K. et al. An Approach to Modeling Structural Materials with Low Hydrogen Concentration, Springer, Cham 63-87 (2019) [Google Scholar]
  24. Belyaev A.K., Polyanskiy V.A., Porubov A.V. Nonlinear dynamics of hydrogen concentration in high-strength and high-entropy alloys, Continuum Mech. Therm. 1-10 (2018) [Google Scholar]
  25. Polyanskiy A.M. et al. Relation of elastic properties, yield stress and ultimate strength of polycrystalline metals to their melting and evaporation parameters with account for nano and micro structure, Acta Mech. 229, 12, 4863-4873 (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.