Open Access
E3S Web Conf.
Volume 128, 2019
XII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2019)
Article Number 01015
Number of page(s) 5
Section Heat and Mass Transfer in Energy Systems
Published online 08 November 2019
  1. A.C. Benim, M. Geiger, S. Doehler, M. Schoenenberger, H. Roemer, “Modelling the flow in the exhaust hood of steam turbines under consideration of turbine-exhaust hood interaction”, in: Proceed. 1st European Conf. Turbomachinery - Fluid Dynamic and Thermodynamic Aspects: Computational. Methods, Erlangen, Germany, March 1-3, 1995, Book Series: VDI Ber., Vol.1185, pp.343–357 (VDI Verlag, Duesseldorf, 1995) [Google Scholar]
  2. D.G. Ebling, A. Krumm, B. Pfeiffelmann, J. Gottschald, J. Bruchmann, A.C. Benim, M. Adam, R. Labs, R.R. Herbertz, A. Stunz, “Development of a system for thermoelectric heat recovery from stationary industrial processes”, Journal of Electronic Materials, 45(7), pp.3433–3439 (2016) [CrossRef] [Google Scholar]
  3. A.C. Benim, “A finite element solution of radiative heat transfer in participating media utilizing the moment method”, Computer Methods in Applied Mechanics and Engineering, 67(1), pp.1–14 (1988) [Google Scholar]
  4. A.C. Benim, M. Cagan, D. Gunes, “Computational analysis of transient heat transfer in turbulent pipe flow”, International Journal of Thermal Sciences, 43(8), pp.725–732 (2004) [CrossRef] [Google Scholar]
  5. S.G. Kandlikar, “A roadmap for implementing minichannels in refrigeration and air-conditioning systems - Current status and future directions”, Heat Transfer Engineering, 28, pp.973–85 (2007) [CrossRef] [Google Scholar]
  6. K. Roth, D. Westphalen, J. Dieckmann, S. Hamilton, W. Goetzler, “Energy consumption characteristics of commercial building HVAC systems”, Vol 3, Energy savings potential, NTIS Rep. PB2002-107657 (2002) [Google Scholar]
  7. S.G. Kandlikar, S. Colin, Y Peles, S. Garimella, R.F. Pease, J.J. Brandner, et al., “Heat Transfer in Microchannels—2012 Status and Research Needs”, Journal of Heat Transfer, 135, pp.91001 (2013) [Google Scholar]
  8. F.P. Incorpera, D.D. Dewitt, T.L. Bergman, A.S. Lavine, Principles of Heat and Mass Transfer, 7th Ed. (Wiley, Singapore, 2013) [Google Scholar]
  9. S.M. Ghiaasiaan, Two-Phase Flow, Boiling, and Condensation, 2nd Ed. (Cambridge University Press, Cambridge, 2017) [CrossRef] [Google Scholar]
  10. E. Da Riva, D. Del Col, “Effect of gravity during condensation of R134a in a circular minichannel: VOF simulation of annular condensation”, Microgravity Sci. Techn., 23, pp.87–97 (2011) [CrossRef] [Google Scholar]
  11. E. Da Riva, D. Del Col, “Numerical Simulation of Laminar Liquid Film Condensation in a Horizontal Circular Minichannel”, Journal of Heat Transfer, 134, pp.51019 (2012) [Google Scholar]
  12. H. Ganapathy, A. Shooshtari, K. Choo, S. Dessiatoun, M. Alshehhi, M. Ohadi, “Volume of fluid-based numerical modeling of condensation heat transfer and fluid flow characteristics in microchannels”, Int. J. Heat and Mass Transfer, 65, pp.62–72 (2013) [CrossRef] [Google Scholar]
  13. S. Bortolin, E. Da Riva, D. Del Col, “Condensation in a square minichannel: Application of the VOF method”, Heat Transfer Eng., 35, pp.193–203 (2014) [CrossRef] [Google Scholar]
  14. S. Chen, Z. Yang, Y. Duan, Y Chen, D. Wu, “Simulation of condensation flow in a rectangular microchannel”, Chemical Eng. and Processing: Process Intensification, 76, pp.60–9 (2014) [CrossRef] [Google Scholar]
  15. C. Wu, J. Li, “Numerical simulation of flow patterns and the effect on heat flux during R32 condensation in microtube”, International Journal of Heat and Mass Transfer, 121, pp.265–74 (2018) [Google Scholar]
  16. J. Zhang, W. Li, W.J. Minkowycz, “Numerical simulation of condensation for R410A at varying saturation temperatures in mini/micro tubes”, Numerical Heat Transfer ; A 69, pp.464–78 (2016) [CrossRef] [Google Scholar]
  17. J.M. Li, B.X. Wang, “Size effect on two-phase regime for condensation in micro/mini tubes”, Heat Transfer - Asian Research, 32, pp.65–71 (2003) [CrossRef] [Google Scholar]
  18. G. Nema, S. Garimella, B.M. Fronk, “Flow regime transitions during condensation in microchannels”, International J. Refrigeration, 40, pp.227–40 (2014) [CrossRef] [Google Scholar]
  19. J.W. Coleman, S. Garimella, “Two-phase flow regimes in round, square and rectangular tubes during condensation of refrigerant R 134a”, International Journal of Refrigeration, 26, pp.117–28 (2003) [Google Scholar]
  20. C.W. Hirt, B.D. Nichols, “Volume of fluid ( VOF ) method for the dynamics of free boundaries”, J. Computational Physics, 39, pp.201–25 (1981) [Google Scholar]
  21. J.U. Brackbill, D.B. Kothe, C. Zemach, “A continuum method for modeling surface tension”, J. Computational Physics, 100, pp.335–54 (1992) [Google Scholar]
  22. W.H. Lee, “A pressure iteration scheme for two- phase flow modeling”, Technical Report, Los Alamos Scientific Laboatory, University of California, New Mexico (1979) [Google Scholar]
  23. ANSYS® FLUENT 19.2, [Google Scholar]
  24. P. Sagaut, Large Eddy Simulation for Incompressible Flows - An Introduction (Springer, Berlin, 2006) [Google Scholar]
  25. E. Garnier, N. Adams, P. Sagaut, Large Eddy Simulation for Compressible Flows (Springer, Berlin, 2009) [CrossRef] [Google Scholar]
  26. A.C. Benim, M.P. Escudier, A. Nahavandi, A.K. Nickson, K.J. Syed, F. Joos, “Experimental and numerical investigation of isothermal flow in an idealized swirl combustor”, International Journal of Numerical Methods for Heat & Fluid Flow, 20(3), pp.348–370 (2010) [CrossRef] [Google Scholar]
  27. P.A. Durbin, B.A. Pettersson Reif, Statistical Theoy and Modeling for Turbulent Flows, 2nd Ed. (Wiley, Hoboken, NJ, USA, 2011) [Google Scholar]
  28. F.R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications”, AIAA Journal, 32 (1994) [Google Scholar]
  29. A.C. Benim, K. Ozkan, M. Cagan, D. Gunes, “Computational investigation of turbulent jet impinging onto rotating disk”, Int. J. Num. Methods for Heat & Fluid Flow, 17(3), pp.284–301 (2007) [CrossRef] [Google Scholar]
  30. J.S. Shin, M.H. Kim, “An experimental study of flow condensation heat transfer inside circular and rectangular mini-channels”, Heat Transfer Engineering, 26 (3), pp.36–44 (2005) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.