Computational study of active flow control drag reduction device for utility vehicle

Jęedrzej Mosiężny; Bartosz Ziegler

doi:10.1051/e3sconf/201912809003

All issues

Volume 128 (2019)

E3S Web Conf., 128 (2019) 09003

References

Open Access

Issue		E3S Web Conf. Volume 128, 2019 XII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2019)


Article Number		09003
Number of page(s)		6
Section		Advanced Numerical Methods
DOI		https://doi.org/10.1051/e3sconf/201912809003
Published online		08 November 2019

Reflection Group on the Future of the EU 2030, Tech. Rep. May (2010), http://www.reflectiongroup.eu/wp-content/uploads/2®1®/®5/reflection{\_}en{\_}web.pdf [Google Scholar]
I. Grguric, Europe 2020 - European Strategy for Smart, Sustainable and Inclusive Growth (2011) [Google Scholar]
Council of the European Union, Directive (EU) 2015/719 of 29 April 2015 amending Council Directive 96/53/EC laying down for certain road vehicles circulating within the Community the maximum authorised dimensions in national and international traffic and the maximum authorised weights (2015) [Google Scholar]
C. NOVAK, K. CORNELIUS, An LDV investigation of a circulation control airfoil flowfield, in 24th Aerospace Sciences Meeting (1986) [Google Scholar]
K. Paschal, D. Neuhart, G. Beeler, B. Allan, Circulation Control Model Experimental Database for CFD Validation, in 50th AIAA Aerospace Sciences Meeting and Exhibit (2012), https://ntrs.nasa.gov/search.jsp?R=2®12®®®1334 [Google Scholar]
P.R. Spalart, S.R. Allmaras, A One-Equatlon Turbulence Model for Aerodynamic Flows, in AIAA paper 1992-0439 (1992), ISBN 1111111111, ISSN 00341223 [Google Scholar]
J. Bardina, P. Huang, T. Coakley, Turbulence Modeling Validation, Testing, and Development, NASA Tech. Memo. (1997) [Google Scholar]
M.I. Yaras, A.D. Grosvenor, An Evaluation of Several Low-Re Turbulence Models Part 1- Flat- Plate Boundary Layer and Axisymmetric Separating Flows, in ICAS 2002 CONGRESS (2002) [Google Scholar]
F.R. Menter, Two-equation eddy-viscosity turbulence models for engineering applications (1994) [Google Scholar]
D.M. Driver, Reynolds shear stress measurements in a separated boundary layer flow, in AIAA 22nd Fluid Dynamics, Plasma Dynamics and Lasers Conference, 1991 (1991) [Google Scholar]
C.U. Buice, J.K. Eaton, Experimental investigation of flow through an asymmetric plane diffuser (2000) [Google Scholar]
D.D. Apsley, M.A. Leschziner, Advanced turbulence modelling of separated flow in a diffuser (2000) [Google Scholar]
A. Gerasimov, FLUENT: Quick Guide to Setting Up LES-type Simulations (2016), http://www.tfd.chalmers.se/{~}lada/comp{\_}turb{\_}model/postscript{\_}files/Quick{\_}Guide{\_}to{\_}Setting{\_}Up{\_}LES{\_}version{\_}1.4{\_}for{\_}Lars.pdf [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Reflection Group on the Future of the EU 2030, Tech. Rep. May (2010), http://www.reflectiongroup.eu/wp-content/uploads/2®1®/®5/reflection{\_}en{\_}web.pdf [Google Scholar]

[2] I. Grguric, Europe 2020 - European Strategy for Smart, Sustainable and Inclusive Growth (2011) [Google Scholar]

[3] Council of the European Union, Directive (EU) 2015/719 of 29 April 2015 amending Council Directive 96/53/EC laying down for certain road vehicles circulating within the Community the maximum authorised dimensions in national and international traffic and the maximum authorised weights (2015) [Google Scholar]

[4] C. NOVAK, K. CORNELIUS, An LDV investigation of a circulation control airfoil flowfield, in 24th Aerospace Sciences Meeting (1986) [Google Scholar]

[5] K. Paschal, D. Neuhart, G. Beeler, B. Allan, Circulation Control Model Experimental Database for CFD Validation, in 50th AIAA Aerospace Sciences Meeting and Exhibit (2012), https://ntrs.nasa.gov/search.jsp?R=2®12®®®1334 [Google Scholar]

[6] P.R. Spalart, S.R. Allmaras, A One-Equatlon Turbulence Model for Aerodynamic Flows, in AIAA paper 1992-0439 (1992), ISBN 1111111111, ISSN 00341223 [Google Scholar]

[7] J. Bardina, P. Huang, T. Coakley, Turbulence Modeling Validation, Testing, and Development, NASA Tech. Memo. (1997) [Google Scholar]

[8] M.I. Yaras, A.D. Grosvenor, An Evaluation of Several Low-Re Turbulence Models Part 1- Flat- Plate Boundary Layer and Axisymmetric Separating Flows, in ICAS 2002 CONGRESS (2002) [Google Scholar]

[9] F.R. Menter, Two-equation eddy-viscosity turbulence models for engineering applications (1994) [Google Scholar]

[10] D.M. Driver, Reynolds shear stress measurements in a separated boundary layer flow, in AIAA 22nd Fluid Dynamics, Plasma Dynamics and Lasers Conference, 1991 (1991) [Google Scholar]

[11] C.U. Buice, J.K. Eaton, Experimental investigation of flow through an asymmetric plane diffuser (2000) [Google Scholar]

[12] D.D. Apsley, M.A. Leschziner, Advanced turbulence modelling of separated flow in a diffuser (2000) [Google Scholar]

[13] A. Gerasimov, FLUENT: Quick Guide to Setting Up LES-type Simulations (2016), http://www.tfd.chalmers.se/{~}lada/comp{\_}turb{\_}model/postscript{\_}files/Quick{\_}Guide{\_}to{\_}Setting{\_}Up{\_}LES{\_}version{\_}1.4{\_}for{\_}Lars.pdf [Google Scholar]