Development of Real Time Machine Tools Component Utilization Data Acquisition for developing Dynamic Model of Maintenance Scheduling

Open Access

Issue		E3S Web Conf. Volume 130, 2019 The 1^st International Conference on Automotive, Manufacturing, and Mechanical Engineering (IC-AMME 2018)


Article Number		01015
Number of page(s)		10
DOI		https://doi.org/10.1051/e3sconf/201913001015
Published online		15 November 2019

S. Borris. Handbook on the Total Productive Maintenance. New York: McGraw Hill (2006). https://masdukiasbari.files.wordpress.com/2011/04/0071467335-total-productive-maintenance.pdf [Google Scholar]
H.B. Harja, T Prakosa, and Y Yuwana, Applied Mechanical and Material. J., 842: 365–372 (2015). https://www.scientific.net/AMM.842.365 [CrossRef] [Google Scholar]
M. Chen, S. Mizutani, T. Nakagawa, International Journal of Reliability, Quality and Safety Engineering, 17, 1:27–39 (2010). https://www.worldscientific.com/doi/abs/10.1142/S0218539310003652 [Google Scholar]
M. Mori, M. Fujishima, Y. Inamasu, Y. Oda, CIRP Annals, 60:145–148(2011). https://www.sciencedirect.com/science/article/pii/S0007850611001004 [CrossRef] [Google Scholar]
T. Moriwaki. CIRP Annals, 57, 2: 736–749 (2008). https://www.sciencedirect.com/science/article/pii/S0007850608001893 [CrossRef] [Google Scholar]
E. Abele, Y. Altintas, C Brecher, CIRP Annals, 59, 2:781–802 (2010). https://www.sciencedirect.com/science/article/pii/S0007850610001897 [Google Scholar]
R. Neugebauer, B. Denkena, K. Wegener, CIRP Annals, 56, 2: 657–686 (2007). https://www.sciencedirect.com/science/article/pii/S0007850607001618 [Google Scholar]
X. Xu, The International Journal of Advanced Manufacturing Technology, 92, 5–8: 1893–1900(2017). https://link.springer.com/article/10.1007/s00170-017-0300-7 [Google Scholar]
C. Liu, X. Xu. Procedia CIRP 63:70–75 (2017). https://www.sciencedirect.com/science/article/pii/S221282711730224X [Google Scholar]
C. Liu, H. Vengayil, R.Y. Zhong, X. Xu. Journal of manufacturing system. 638:1–12(2018). https://www.academia.edu/37372756/A_systematic_development_method_for_cyber-physical_machine_tools [Google Scholar]
H.B. Harja, T. Prakosa, S. Raharno, Y.Y. Martawirya, I. Nurhadi, A.S. Nogroho. IOP Conf. Series: Material Science and Engineering, 319:1–7(2018). https://iopscience.iop.org/article/10.1088/1757-899X/319/1/012016 [Google Scholar]
Y. Cai, B. Starly, P. Cohen, Y.S. Lee, Procedia Manufacturing 10:1031–1042(2017). https://www.sciencedirect.com/science/article/pii/S2351978917302767 [Google Scholar]
R.Y. Zhong, L. Wang, X. Xu. An IoT-enabled Real-time Machine Status Monitoring Approach for Cloud Manufacturing. The 50th CIRP Conference on Manufacturing System. Procedia CIRP 63:709–714 (2017). https://www.researchgate.net/publication/318355493_An_IoT-enabled_Real-time_Machine_Status_Monitoring_Approach_for_Cloud_Manufacturing [Google Scholar]
C. Kuo, K. Ting, Y. Chen, D. Yang, H. Chen. Journal of System Architecture 81:44–53(2017). https://www.sciencedirect.com/science/article/pii/S1383762117301133 [Google Scholar]
Siemens AG. Handbook on the Sinumerik 802C Baseline Start-Up. Erlangen: Siemens-Aktiengesellschaft (2006). https://cache.industry.siemens.com/dl/files/185/28546185/att_112646/v1/802SC_BPF_0803_en.pdf [Google Scholar]
A.G. Siemens A.G. Handbook on the Simens Micromaster 440 operating instruction. Erlangen: Siemens-Aktiengesellschaft (2003). https://inverterdrive.com/file/siemens-micromaster-440-manual [Google Scholar]
Fully Integrated, Hall Effect-Based Linier Current Sensor IC with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor. Allegro Micro System (2017). https://www.allegromicro.com/en/Products/Sense/Current-Sensor-ICs/Zero-To-Fifty-Amp-Integrated-Conductor-Sensor-ICs/ACS713 [Google Scholar]
G.C. Hillar. MQTT Essentiala - A Lightweight IoT Protocol. Packt Publishing, Birmingham (2017). https://books.google.co.id/books?id=40EwDwAAQBAJ&pg=PP2&lpg=PP2&dq=Hillar+2017+A+Lightweight+IoT+Protocol.&source=bl&ots=fKJwqOE7nM&sig=ACfU3U3Ug56GKF-FtpOh4bLQXknz5ombUQ&hl=en&sa=X&ved=2ahUKEwjj79G1lObjAhXv63MBHQHTA1oQ6AEwB3oECAoQAQ#v=onepage&q=Hillar%202017%20A%20Lightweight%20IoT%20Protocol.&f=false [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.