Open Access
Issue |
E3S Web Conf.
Volume 130, 2019
The 1st International Conference on Automotive, Manufacturing, and Mechanical Engineering (IC-AMME 2018)
|
|
---|---|---|
Article Number | 01016 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/e3sconf/201913001016 | |
Published online | 15 November 2019 |
- G.D. Haryadi, R.T. Dewa, I.M.W. Ekaputra, J. Theor. Appl.Mech., 56, 1: 179–190 (2018). http://jtam.pl/Fatigue-crack-growth-and-probability-assessment-fortransverse-TIG-welded-Aluminum,101704,0,2.html [CrossRef] [Google Scholar]
- E.F.A. Zeid, J.Mater.Res.Technol., 8, 2: 1870–1877 (2019). https://www.sciencedirect.com/science/article/pii/S2238785418306823 [CrossRef] [Google Scholar]
- W.J. Liang, P.A. Rometsch, L.F. Cao, N. Birbilis, Corros.Sci., 76: 119–128 (2013). https://www.sciencedirect.com/science/article/pii/S0010938X13002783 [Google Scholar]
- I.M.W. Ekaputra, S. Mungkasi, G.D. Haryadi, R.T. Dewa, S.J. Kim. The influence of welding speed conditions of GMAW on mechanical properties of 316L austenitic stainless steel.International Joint Conference on Advanced Engineering Technology and International Symposium on Advanced Mechanical and Power Engineering (Bali,Indonesia,2017). Matec Web of Conferences 159, 02009: 1–6 (2018). https://www.matec-conferences.org/articles/matecconf/abs/2018/18/matecconf_ijcaetisampe2018_02009/matecconf_ijcaet-isampe2018_02009.html [Google Scholar]
- A.K. Lakshminarayanan, V. Balasubramanian, K. Elangovan, Int.J.Adv.Manuf.Technol., 40, 3–4: 286–296 (2009). https://link.springer.com/article/10.1007/s00170-007-1325-0 [CrossRef] [Google Scholar]
- J. Hensel, T.N. Pagel, D.T. Ngoula, H.T. Beier, D. Tchuindjang, U. Zerbst, Eng.Fract.Mech., 198: 123–141 (2018). https://www.sciencedirect.com/science/article/pii/S0013794417303326 [CrossRef] [Google Scholar]
- R.T. Dewa, J.H. Park, S.J. Kim, W.G. Kim, E.S. Kim, G.D. Haryadi,et al. A review of low-cycle fatigue of Alloy 617 for use in VHTR components: experimental outlook.International Joint Conference on Advanced Engineering Technology and International Symposium on Advanced Mechanical and Power Engineering (Bali,Indonesia,2017). Matec Web of Conferences 159, 02049: 1–6 (2018). https://www.matecconferences.org/articles/matecconf/abs/2018/18/matecconf_ijcaetisampe2018_02049/matecconf_ijcaet-isampe2018_02049.html [Google Scholar]
- G. Yan, M.J. Tan, A. Crivoi, F. Li, S. Kumar, C.H.N. Chia, Procedia Eng., 207: 633–638 (2017). https://www.sciencedirect.com/science/article/pii/S1877705817358265 [Google Scholar]
- M.N. Gussev, N. Sridharan, M. Norfolk, K.A. Terrani, S.S. Babu, Mater.Sci.Eng., A,684: 606–616 (2017). https://www.sciencedirect.com/science/article/abs/pii/S0921509316315866 [CrossRef] [Google Scholar]
- W.G. Kim, J.Y. Park, S.D. Hong, S.J. Kim, Nucl.Eng.Des., 241: 3580–3586 (2011). https://www.sciencedirect.com/science/article/pii/S0029549311005255] [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.