Open Access
Issue
E3S Web Conf.
Volume 137, 2019
XIV Research & Development in Power Engineering (RDPE 2019)
Article Number 01021
Number of page(s) 5
DOI https://doi.org/10.1051/e3sconf/201913701021
Published online 16 December 2019
  1. G. Qii R. T. Yang, ,,Performance and kinetics study for low-temperature SCR of NO with NH3 over MnOx-CeO2 catalyst,” Journal of Catalysis, 217, pp. 434-441, 2003. [Google Scholar]
  2. P. S. Hammershoi, P. N. Vennestrom, H. Falsig, A. D. Jansen i T. V. Janssens, ,,Importance of the Cu oxidation state for the SO2 poisoning of a Cu-SAPO-34 catalyst in the NH3-SCR reaction,” Applied Catalysis B: Environmental, 236, pp. 377-383, 2018. [CrossRef] [Google Scholar]
  3. L. Song, J. Chao, Y. Fang, H. He, J. Li, W. Qiu i G. Zhang, ,,Promotion of ceria for decomposition of ammonia bisulfate over V2O5-MoO3/TiO2 catalyst for selective catalytic reduction,” Chamical Engineering Journal, 303, pp. 275-281, 2016. [CrossRef] [Google Scholar]
  4. S. Youn, I. Song, H. Lee, S. J. Cho i D. H. Kim, „Effect of pore structure of TiO2 on the SO2 poisoning over V2O5/TiO2 catalysts for selective catalytic reduction of NOx with NH3,” Catalysis Today, 303, pp. 19-24, 2018. [Google Scholar]
  5. R. Sporl, J. Maier i G. Scheffknecht, „Sulphur Oxide Emissions from Dust-Fired Oxy-Fuel Combustion of Coal,” Energy Procedia, 37, pp. 1435-1447, 2013. [Google Scholar]
  6. J. Lu, Z. Zhou, H. Zhang i Z. Yang, ,,Influenced factors study and evaluation for SO2/SO3 conversion rate in SCR process,” Fuel, 245, pp. 528-533, 2019. [CrossRef] [Google Scholar]
  7. P. Marier i H. P. Dibbs, „The catalytic conversion of SO2 to SO3 by fly ash and capture of SO2 and So3 by CaO and MgO,” Thermochem. Acta., 8, pp. 155-165, 1974. [CrossRef] [Google Scholar]
  8. Breen Energy Solutions, „Comprehensive acid gas management,” 2012. [Online]. Available: http://breenes.com/wp-content/uploads/2017/04/Comprehensive_Condensable_Management_Program-RevA.pdf. [Data uzyskania doste pu: July 2019]. [Google Scholar]
  9. W. Wei, F. Sun, Y. Shi i L. Ma, „Theoretical prediction of acid dew point and safe operating temperature of heat exchangers for coal-fired power plants,” Applied Thermal Engineering, 123, pp. 782-790, 2017. [Google Scholar]
  10. Z. Li, F. Sun, Y. Shi, F. Li i L. Ma, ,,Experimental study and mechanism analysis on low temperature corrosion of coal fired boiler heating surface,” Applied Thermal Engineering, 80, pp. 355-361, 2015. [Google Scholar]
  11. Y. Shi, H. Shu, Y. Zhang, H. Fan, Y. Zhang i L. Yang, „Formation and decomposition of NH4HSO4 during selective catalytic reduction of NO with NH3 over V2O5-WO3/TiO2 catalysts,” Fuel Processing Technology, 150, pp. 141-147, 2016. [CrossRef] [Google Scholar]
  12. C. Zheng, Y. Wang, Y. Liu, Z. Yang, R. Qu, D. Ye, C. Liang, S. Liu i X. Gao, ,,Formation, transformation, measurement, and control of SO3 in coal-fired power plants,” Fuel, 241, pp. 327-346, 2019. [CrossRef] [Google Scholar]
  13. Charles A. Lockert, Breen Energy Solution., „Dynamic Control of SCR Minimum Operating Temperature,” w CoalGen, 2009. [Google Scholar]
  14. „EBSILON®Professional for the design of power plants,” STEAG Energy Services, [Online]. Available: https://www.steag-systemtechnologies.com/en/products/ebsilon-professional/. [Data uzyskania doste pu: 2019]. [Google Scholar]
  15. L. Muzio, S. Bogseth, R. Himes, Y. Chien i D. Dunn-Rankin, „Ammonium bisulfate formation and reduced load SCR operation,” Fuel, 206, pp. 180-189, 2017. [CrossRef] [Google Scholar]
  16. J. Menasha, D. Dunn-Rankin, L. Muzio i J. Stallings, „Ammonium bisulfate formation temperature in a bench-scale single-channel air preheater,” Fuel, 90, pp. 2445-2453, 2011. [CrossRef] [Google Scholar]
  17. S. Shwan, W. Partridge, J. Choi i L. Olsson, „Kinetic modeling of NOx storage and reduction using spatially resolved MS measurements,” Applied Catalysis B: Environmental, 147, pp. 1028-1041, 2014. [CrossRef] [Google Scholar]
  18. G. Dolanc, S. Strmcnik i J. Petrovcic, „NOx selective catalytic reduction control based on simple models,” Journal of Process Control, 11, pp. 35-51, 2001. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.