Open Access
Issue
E3S Web Conf.
Volume 166, 2020
The International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2020)
Article Number 07001
Number of page(s) 6
Section Sustainable Transport
DOI https://doi.org/10.1051/e3sconf/202016607001
Published online 22 April 2020
  1. Freight wagons. General requirements for designing new and improved wagons (non-self-propelled) for a 1520mm gauge. DSTU 7598 (Kyiv, 2015), p. 162 [Google Scholar]
  2. Freight wagons. Requirements for strength and dynamic qualities. GOST 33211 (Standartinform, Moscow, 2016), p. 54 [Google Scholar]
  3. Railway applications – Structural requirements of railway vehicle bodies. Part 2: Freight wagons. EN 12663-2 (BSI, Bulgaria, 2010), p. 54 [Google Scholar]
  4. O. Fomin, J. Gerlici, A. Lovskaya, K. Kravchenko, P. Prokopenko, A. Fomina, V. Hauser, Research of the strength of the bearing structure of the flat wagon body from round pipes during transportation on the railway ferry. MATEC Web of Conferences 235 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  5. A.V. Kondratiev, V.E. Gaidachuk, M.E. Kharchenko, Relationships between the ultimate strengths of polymer composites in static bending, compression, and tension. Mechanics of Composite Materials 52(2), 259–266 (2019) [CrossRef] [Google Scholar]
  6. P. Kuсera, V. Pistek, Testing of the mechatronic robotic system of the differential lock control on a truck. International Journal of Advanced Robotic Systems 14(5) (2017) [Google Scholar]
  7. V. Pistek, L. Klimes, T. Mauder, P. Kucera, Optimal design of structure in rheological models: An automotive application to dampers with high viscosity silicone fluids. Journal of Vibroengineering 19(6), 4459–4470 (2017) [CrossRef] [Google Scholar]
  8. W. Czyżycki, Modeling of heat flow through multilayer internal supports of cryogenic vessels. Technical transportations 2, 27–34 (2015) [Google Scholar]
  9. S. Myamlin, Y. Kebal, S. Kondratyuk, Perspective constructions of tank-containers for transportation of light oil products, ammonia and hydrocarbon gases. Rail transport Ukraine 2, 44–46 (2012) [Google Scholar]
  10. J. Föhr, K. Karttunen, J. Enström, T. Johannesson, T. Ranta, Metal and Composite Intermodal Containers in Comparative Cold Tests with Wood Chips. Journal of Sustainable Bioenergy Systems 05(01), 32–39 (2015) [CrossRef] [Google Scholar]
  11. B. Rudraprasad, H. Abhishek, in Proceedings of 58th Congress of ISTAM, India, 2013 [Google Scholar]
  12. G. Vatulia, A. Falendysh, Y. Orel, M. Pavliuchenkov, Structural Improvements in a Tank Wagon with Modern Software Packages. Procedia Engineering 187, 301–307 (2017) [Google Scholar]
  13. Steel shapes tubes for metal structures. Technical requirements. GOST R54157-2010 (IPK Standards Publishing, Moscow, 2012), p. 92 [Google Scholar]
  14. Matt Weber, Gaurav Verma, SolidWorks Simulation 2015 Black Book II Edition (CreateSpace Independent Publishing Platform, 2015) [Google Scholar]
  15. P. Seshu, Finite Element Analysis (PHI Learning Private Limited, 2012) [Google Scholar]
  16. Zhu Bofang, The finite element method: Fundamentals and Applications in Civil, Hydraulic, Mechanical and Aeronautical engineering (China Institute of water resources and gidropower research, 2018) [CrossRef] [Google Scholar]
  17. A. Reyes, Beginners guide to SolidWorks 2018 (SDC Publications, 2017) [Google Scholar]
  18. P. Kurowski, Engineering Analysis with SOLIDWORKS Simulation 2010 (Schroff Development Corporation, 2010) [Google Scholar]
  19. V.M. Rudenko, Mathematical statistics (Center of educational literature, Kyiv, 2012) [Google Scholar]
  20. A.I. Kobzar, Applied Mathematical Statistics. For engineers and scientists (Fismatlit, Moscow, 2012) [Google Scholar]
  21. A. Borovkov, Mathematical Statistics. Textbooks for universities. Special literature (Lan, Moscow, 2010) [Google Scholar]
  22. G.I. Ivchenko, Yu.I. Medvedev, Mathematical statistics (Librocom, Moscow, 2014) [Google Scholar]
  23. V.V. Garbaruk, Yu.Yu. Pupysheva, Mathematical statistics (Petersburg State University of Railway Engineering, Petersburg, 2012), p. 56 [Google Scholar]
  24. Containers for the transport of dangerous goods. Requirements for operational safety. GOST 31232 (Belarusian State Institute for Standardization and Certification, Minsk, 2005), p. 6 [Google Scholar]
  25. P. Kurowski, Engineering Analysis with SOLIDWORKS Simulation 2019 (Schroff Development Corporation, 2019) [Google Scholar]
  26. A.A. Alyamovsky, Engineering calculations in SolidWorks (DMK Pres, 2010) [Google Scholar]
  27. A.A. Alyamovsky, Engineering calculations in SolidWorks Simulation, 2nd edn (DMK Pres, 2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.