Open Access
Issue |
E3S Web Conf.
Volume 168, 2020
II International Conference Essays of Mining Science and Practice
|
|
---|---|---|
Article Number | 00030 | |
Number of page(s) | 11 | |
DOI | https://doi.org/10.1051/e3sconf/202016800030 | |
Published online | 06 May 2020 |
- Kulikova, D.V., Pavlychenko, A.V. (2016). Estimation of ecological state of surface water bodies in coal mining region as based on the complex of hydrochemical indicators. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 62-70 [Google Scholar]
- Kolesnik, V.Ye., Pavlichenko, A.V., Buchavy, Yu.V. (2016). Determination of dynamic parameters of dust emission from a coal mine fang. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 81-87 [Google Scholar]
- Bulat, A., Voloshyn, O., Ponomarenko, S., Gubenko, D. (2013). New-generation technique and technology for leakage tests. Annual Scientific-Technical Colletion Mining of Mineral Deposits 2013, 1-4. doi: 10.1201/b16354-2 [Google Scholar]
- Bondarenko, A.O., Naumenko, R.P. (2019). Comprehensive solution of recycling waste from stone processing industry. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 96-101. doi: 10.29202/nvngu/2019-4/14 [Google Scholar]
- Dryzhenko, A., Shustov, A., Moldabayev, S. (2017). Justification of parameters of building inclined trenches using belt conveyors. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 17, (13), 471-478. doi: 10.5593/sgem2017/13/s03.060 [Google Scholar]
- Ropyak, L., Schuliar, I., Bohachenko, O. (2016). Influence of technological parameters of centrifugal reinforcement upon quality indicators of parts. Eastern-European Journal of Enterprise Technologies, 1, 5(79). doi: 10.15587/1729-4061.2016.59850 [Google Scholar]
- Bazhenov, V.A., Gulyar, A.I., Piskunov, S.O., Andrievskii, V.P. (2013). Design life assessment of the blade root of a gas turbine unit under thermomechanical loading. Strength of Materials, 45(3), 329-339. doi: 10.1007/s11223-013-9463-0 [CrossRef] [Google Scholar]
- Sladkowski, A.V., Kyrychenko, Y.O., Kogut, P.I., Samusya, V.I., Kolosov, D.L., (2019). Innovative designs of pumping deep-water hydrolifts based on progressive multiphase non-equilibrium models. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 51-57. doi: 10.29202/nvngu/2019-2/6 [CrossRef] [Google Scholar]
- Pivnyak, G., Samusia, V., Oksen, Y., Radiuk, M. (2015). Efficiency increase of heat pump technology for waste heat recovery in coal mines. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining, 1-4 [Google Scholar]
- Krasovskiy, P., Tsyplenkov, D., Nesterova, O., (2013). Operating dynamics of parameters and technical losses in the components of power supply systems. Energy Efficiency Improvement of Geotechnical Systems Proceedings of the International Forum on Energy Efficiency, 113-120 [CrossRef] [Google Scholar]
- Bobrov, O.V., Tsyplenkov, D.V., Grebeniuk, A.M., Kyrychenko, M.S. (2019). Justification of the optimum operation of electromechanical system for production and distribution of pressurized air. Naukovyi visnyk Natsionalnoho hirnychoho universytetu, (2), 101-107. doi: 10.29202/nvngu/2019-2/13 [CrossRef] [Google Scholar]
- Voloshyn, O., Potapchuk, I., Zhevzhyk, O., Zhovtonoha, M. (2018). Results of the experimental research of the heat-transfer jet pressure to the rock surface during thermal reaming of the borehole. Ukrainian School of Mining Engineering: E3S Web of Conferences, 60. doi: 10.1051/e3sconf/20186000024 [Google Scholar]
- Bondarenko, A.O. (2018). Modeling of interaction of inclined surfaces of a hydraulic classifier with a flow of solid particles. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 13-20. doi: 10.29202/nvngu/2018-4/5 [CrossRef] [Google Scholar]
- Bazhenov, V.A., Gulyar, A.I., Piskunov, S.O., Shkryl, A.A. (2006). Life assessment for a gas turbine blade under creep conditions based on continuum fracture mechanics. Strength of Materials, 38(4), 392-397. doi: 10.1007/s11223-006-0055-0 [Google Scholar]
- Belmas, I., Kolosov, D. (2011). The stress-strain state of the stepped rubber-rope cable in bobbin of winding. Technical and Geoinformational Systems in Mining: School of Underground Mining 2011, 211-214 [CrossRef] [Google Scholar]
- Bondarenko, A.A. (2012). Mathematical modeling of soil dredger absorption processes in the underwater bottomhole. Metallurgical and Mining Industry, 4, (3), 149-152 [Google Scholar]
- Belmas, I., Kogut, P., Kolosov, D., Samusia, V., Onyshchenko, S. (2019). Rigidity of elastic shell of rubber-cable belt during displacement of cables relatively to drum. International Conference Essays of Mining Science and Practice: E3S Web of Conferences, 109. doi: 10.1051/e3sconf/201910900005 [Google Scholar]
- Ilin, S., Adorska, L., Samusia, V., Kolosov, D., Ilina, I. (2019). Conceptual bases of intensification of mining operations in mines of Ukraine based on monitoring and condition management of mine hoisting systems. International Conference Essays of Mining Science and Practice: E3S Web of Conferences, 109. doi: 10.1051/e3sconf/201910900030 [Google Scholar]
- Bel’mas, I.V. (1993). Stress state of rubber-rope tapes during their random damages. Problemy Prochnosti i Nadezhnosti Mashin, (6), 45-48 [Google Scholar]
- Kolosov, L.V., Bel’mas, I.V. (1981). Use of electrical models for investigating composites. Mechanics of Composite Materials, 17(1), 115-119 [CrossRef] [Google Scholar]
- Matsyuk, I.M., Morozova, Т.I., Shlyahov, E.М. (2017). Search of variants of assemblies of structural groups in planar linkages. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 65-69 [Google Scholar]
- Matsyuk, I.M., Shlyahov, E.М., Yehurnov, O.I. (2019). On applying high-class mechanisms of heavy-loaded machines. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 68-73. doi: 10.29202/nvngu/2019-3/6 [Google Scholar]
- Filimonikhin, G., Filimonikhina, I., Yakymenko, M., Yakimenko, S. (2017). Application of the empirical criterion for the occurrence of auto-balancing for axisymmetric rotor on two isotropic elastic supports. Eastern-European Journal of Enterprise Technologies, 2, 7(86), 51-58. doi: 10.15587/1729-4061.2017.96622 [CrossRef] [Google Scholar]
- Inkin, O., Tishkov, V., Dereviahina, N., Sotskov, V. (2018). Integrated analysis of geofiltrational parameters in the context of underground coal gasification relying upon calculations and modeling. Ukrainian School of Mining Engineering: E3S Web of Conferences, 60. doi: 10.1051/e3sconf/20186000035 [Google Scholar]
- Sadovenko, I., Zahrytsenko, A., Podvigina, O., Dereviahina, N., Brzeźniak, S. (2018). Methodical and applied aspects of hydrodynamic modeling of options of mining operation curtailment. Solid State Phenomena, (277), 36-43. DOI: https://doi.org/10.4028/www.scientific.net/SSP.277.36 [CrossRef] [Google Scholar]
- Shcherbakov, P., Tymchenko, S., Buhrym, O., Klymenko, D. (2019). Research into the crushing and grinding processes of iron ore with its simultaneous effect by mechanical load and electric field of ultra-high frequency. Ukrainian School of Mining Engineering: E3S Web of Conferences, 123. doi: 10.1051/e3sconf/201912301030 [Google Scholar]
- Sadovenko, I.A., Derevyagina, N.I. (2012). About activation potential of loess landslide massif. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 80-84 [Google Scholar]
- Voloshyn, O.I., Potapchuk, I.Y., Zhevzhyk, O.V. (2018). Influence of the heat-transfer stream pressure on the surface of the rock in a process of the thermal reaming of the borehole. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 53-59. doi: 10.29202/nvngu/2018-2/6 [CrossRef] [Google Scholar]
- Kravets, V., Sakhno, V., Bas, K., Kravets, V. (2018). Program spatial movement of high-speed vehicles. In: IOP Conf. Ser.: Mater. Sci. Eng. 383. doi: 10.1088/1757899X/383/1/012032 [CrossRef] [Google Scholar]
- Sobko, B.Yu., Denyschenko, O.V., Lozhnikov, O.V., Kardash, V.A. (2018). The belt conveyor effectiveness at the rock haulage under flooded pit excavations. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 26-32. doi: 10.29202/nvngu/2018-6/4 [CrossRef] [Google Scholar]
- Taran, I.A., Klymenko, I.Yu. (2013). Transfer ratio of double-split transmissions in case of planetary gear input. Naukovyi visnyk Natsionalnoho hirnychoho universytetu, (6), 60-66 [Google Scholar]
- Shustov, O., Dryzhenko, A. (2016). Organization of dumping stations with combined transport types in iron ore deposits mining. Mining of Mineral Deposits, 10(2), 78-84. doi: 10.15407/mining10.02.078 [CrossRef] [Google Scholar]
- Bondarenko, A.I., Taran, I.О. (2017). Effect of antilock brake system on basic parameters of transport vehicle transmission. Naukovyi visnyk Natsionalnoho hirnychoho universytetu, (2), 75-80 [Google Scholar]
- Kolosov, D., Dolgov, O., Bilous, O., Kolosov, A. (2015). The stress-strain state of the belt in the operating changes of the burdening conveyor parameters. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining, 585-590 [CrossRef] [Google Scholar]
- Filimonikhin, G., Olijnichenko, L. (2015). Investigation of the possibility of balancing aerodynamic imbalance of the impeller of the axial fan by correction of masses. Eastern-European Journal of Enterprise Technologies, 5, 7(77), 30-35. doi: 10.15587/1729-4061.2015.51195 [CrossRef] [Google Scholar]
- Olshanetskii, V.E., Stepanova, L.P., Greshta, V.L., Pavlenko, D.V., Tkach, D.V. (2014). Deformation behavior of titanium VT1-0 with submicrocrystalline structure formed by the method of helical extrusion. Metal Science and Heat Treatment, 55(11-12), 603-607. doi: 10.1007/s11041-014-9676-2 [CrossRef] [Google Scholar]
- Greshta, V.L. (2017). Structural liability of sheet-rolled corrosion-resistant ferritic steels to a plastic deforming. Metallofizika i Noveishie Tekhnologii, (39), 1213-1225. doi: 10.15407/mfint.39.09.1213 [CrossRef] [Google Scholar]
- Ropyak, L.Ya., Shatskyi, I.P., Makoviichuk, M.V. (2019). Analysis of interaction of thin coating with an abrasive using one-dimensional model. Metallofizika i Noveishie Tekhnologii, 41, (5), 647-654. doi: 10.15407/mfint.41.05.0647 [CrossRef] [Google Scholar]
- Klassifikatsiya konveyerov. (2015). Retrieved from: https://www.3bhungaria.com.ua/new/178-klassifikatsiya-konvejerov-osnovnye-tipy-konvejerov-napravleniya-razvitiyakonvejerov [Google Scholar]
- Vibratsii v tekhnike: Spravochnik. v 6-ti t./Red. soviet: V.N. Chelomey (pred.). Moskva: Mashinostroyeniye (1981). 4 Vibratsionnyye protsessy i mashiny. Pod red. E.E. Lavendela (1981) [Google Scholar]
- Etherington, Darrell (2018). Hyperloop Transportation Technologies signs first crossstate deal in the U.S. TechCrunch. Retrived from https://techcrunch.com/2018/02/15/hyperloop-transportation-technologies-signs-first-cross-state-deal-in-the-u-s/ [Google Scholar]
- J. Orear, Physics. New York: Macmillan (1979) [Google Scholar]
- F.S. CrawfordJr., Waves (Berkeley Physics Course). 3 New York: McGraw-Hill (1968) [Google Scholar]
- J.J. Stoker Water Waves: The Mathematical Theory with Applications. New Jersey: Wiley (1957) [Google Scholar]
- Korn, G., Korn, T. (1984) Spravochnik po matematike dlya nauchnyh rabotnikov i inzhenerov. Moskva: Nauka [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.