Open Access
Issue |
E3S Web Conf.
Volume 172, 2020
12th Nordic Symposium on Building Physics (NSB 2020)
|
|
---|---|---|
Article Number | 09001 | |
Number of page(s) | 8 | |
Section | Ventilation performance | |
DOI | https://doi.org/10.1051/e3sconf/202017209001 | |
Published online | 30 June 2020 |
- “Goal 7: Sustainable Development Knowledge Platform.” [Online]. Available: https://sustainabledevelopment.un.org/sdg7. [Accessed: 02-Jan-2020]. [Google Scholar]
- “Buildings – Topics - IEA.” [Online]. Available: https://www.iea.org/topics/buildings. [Accessed: 05-Jan-2020]. [Google Scholar]
- H. Ramin, P. Hanafizadeh, T. Ehterami, and M. A. AkhavanBehabadi, “Life cycle-based multi-objective optimization of wall structures in climate of Tehran,” Adv. Build. Energy Res., vol. 13, no. 1, pp. 18–31, 2019. [CrossRef] [Google Scholar]
- NRCan, “Energy Efficiency Trends in Canada 1990-2010,” Natural Resources Canada, 2010. [Google Scholar]
- E. Union, “Heating and cooling | Energy.” [Online]. Available: https://ec.europa.eu/energy/en/topics/energy-efficiency/heating-and-cooling. [Accessed: 05-Jan-2020]. [Google Scholar]
- M. Shakouri, E. N. Krishnan, A. H. Karoyo, L. Dehabadi, L. D. Wilson, and C. J. Simonson, “Water Vapor Adsorption-Desorption Behavior of Surfactant-Coated Starch Particles for Commercial Energy Wheels,” ACS Omega, vol. 4, pp. 14378–14389, 2019. [CrossRef] [PubMed] [Google Scholar]
- ASHRAE, ANSI/ASHRAE Standard 62.2-2019: Ventilation and acceptable indoor air quality in residential buildings. Atlanta: ASHRAE, 2019. [Google Scholar]
- F. Mofidi and H. Akbari, “Personalized energy costs and productivity optimization in offices,” Energy Build., vol. 143, pp. 173–190, 2017. [Google Scholar]
- C. Schweizer et al., “Indoor time-microenvironment-activity patterns in seven regions of Europe,” J. Expo. Sci. Environ. Epidemiol., vol. 17, no. 2, pp. 170–181, 2007. [PubMed] [Google Scholar]
- A. V. Arundel, E. M. Sterling, J. H. Biggin, and T. D. Sterling, “Indirect health effects of relative humidity in indoor environments,” Environ. Health Perspect., vol. VOL. 65, no. 3, pp. 351–361, 1986. [PubMed] [Google Scholar]
- C. J. Simonson and R. W. Besant, “Energy wheel effectiveness: Part I-development of dimensionless groups,” Int. J. Heat Mass Transf., vol. 42, no. 12, pp. 2161–2170, 1999. [Google Scholar]
- M. I. Nizovtsev, V. Y. Borodulin, V. N. Letushko, and A. A. Zakharov, “Analysis of the efficiency of air-to-air heat exchanger with a periodic change in the flow direction,” Appl. Therm. Eng., vol. 93, pp. 113–121, 2016. [Google Scholar]
- C. C. Chang, J. De Liang, and S. L. Chen, “Performance investigation of regenerative total heat exchanger with periodic flow,” Appl. Therm. Eng., vol. 130, pp. 1319–1327, 2018. [Google Scholar]
- H. Ramin, E. N. Krishnan, and C. J. Simonson, “Fixed bed regenerators for HVAC applications,” 27th Can. Congr. Appl. Mech., pp. 1–6, 2019. [Google Scholar]
- E. Krishnan, H. Ramin, and C. J. Simonson, “performance testing of fixed-bed regenerators for hvac,” in The Second Pacific Rim Thermal Engineering Conference, 2019, pp. 1–5. [Google Scholar]
- “Heat Recovery System | Heat Recovery Ventilator | ERV | Energy Recovery.” [Online]. Available: https://www.tempeffnorthamerica.com/. [Accessed: 12-Jul-2019]. [Google Scholar]
- ASHRAE, Method of Testing Air-to-Air Heat/Energy Exchangers, ASHRAE 84-2013. Atlanta, 2014. [Google Scholar]
- L. A. Sphaier and W. M. Worek, “Analysis of heat and mass transfer in porous sorbents used in rotary regenerators,” Int. J. Heat Mass Transf., vol. 47, no. 47, pp. 3415–3430, 2004. [Google Scholar]
- C. J. Simonson and R. W. Besant, “Energy wheel effectiveness: part II part -correlations,” Int. J. Heat Mass Transf., vol. 42, pp. 2171–2185, 1999. [Google Scholar]
- M. I. Nizovtsev, V. Y. Borodulin, and V. N. Letushko, “Influence of condensation on the efficiency of regenerative heat exchanger for ventilation,” Appl. Therm. Eng., vol. 111, pp. 997–1007, 2017. [Google Scholar]
- C. C. Chang, C. H. Lai, C. M. Yang, Y. C. Chiang, and S. L. Chen, “Thermal performance enhancement of a periodic total heat exchanger using energy-storage material,” Energy Build., vol. 67, pp. 579–586, 2013. [Google Scholar]
- F. Fathieh et al., “Determination of air-to-air energy wheels latent effectiveness using humidity step test data,” Int. J. Heat Mass Transf., vol. 103, pp. 501–515, 2016. [Google Scholar]
- C. J. Simonson and R. W. Besant, “Energy wheel effectiveness: part II-correlations,” Int. J. Heat Mass Transf., vol. 42, pp. 2171–2185, 1999. [Google Scholar]
- C. J. Simonson and R. W. Besant, “Energy wheel effectiveness: Part I-development of dimensionless groups,” Int. J. Heat Mass Transf., vol. 42, no. 12, pp. 2161–2170, 1999. [Google Scholar]
- H. Ramin, E. N. Krishnan, W. Alabi, and C. J. Simonson, “Temperature Measurement Correction for the Determination of the Effectiveness of Fixed-Bed Regenerators (FBRs) for HVAC Applications,” in 2020 ASHRAE winter conference, 2020. [Google Scholar]
- W. M. Kays and A. L. London, Compact Heat Exchangers, Third edit. New York: McGraw-Hill, Inc, 1984. [Google Scholar]
- C. J. Simonson and R. W. Besant, “Heat and Moisture Transfer in Desiccant Coated Rotary Energy Exchangers: Part I Numerical Model,” HVAC&R Res., vol. 3, no. 4, pp. 325–350, 1997. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.