Open Access
Issue |
E3S Web Conf.
Volume 172, 2020
12th Nordic Symposium on Building Physics (NSB 2020)
|
|
---|---|---|
Article Number | 25006 | |
Number of page(s) | 8 | |
Section | Energy performance simulation and assessment | |
DOI | https://doi.org/10.1051/e3sconf/202017225006 | |
Published online | 30 June 2020 |
- M. W. Ahmad, M. Mourshed, D. Mundow, M. Sisinni, and Y. Rezgui, “Building energy metering and environmental monitoring - A state-of-the-art review and directions for future research,” Energy and Buildings. 2016. [Google Scholar]
- Committee on Climate Change, “Progress reducing emissions from buildings,” in Meeting Carbon Budgets – 2014 Progress Report to Parliament, 2013. [Google Scholar]
- C. Change, Building a low-carbon economy – the UK ’ s contribution to tackling climate change. 2008. [Google Scholar]
- CIBSE GUIDE F, “CIBSE Guide F: Energy efficiency in buildings,” Energy Effic. Build. Chart. Inst. Build. Serv. Eng. London, 2nd Ed., 2004. [Google Scholar]
- IPCC, Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. 2014. [Google Scholar]
- A. Lewry, “Energy management and building controls,” 2016. [Google Scholar]
- Electrical and Mechanical Services Department, “Technical Guidelines on Retro-commissioning,” 2018. [Google Scholar]
- Z. Li, “An empirical study of knowledge discovery on daily electrical peak load using decision tree,” in Advanced Materials Research, 2012. [Google Scholar]
- Z. Yu, F. Haghighat, B. C. M. Fung, and L. Zhou, “A novel methodology for knowledge discovery through mining associations between building operational data,” Energy Build., 2012. [Google Scholar]
- IES, “Integrated Environmental Solutions Limited,” Main website, 2018.. [Google Scholar]
- D. B. Crawley, C. O. Pedersen, L. K. Lawrie, and F. C. Winkelmann, “Energy plus: Energy simulation program,” ASHRAE J., 2000. [Google Scholar]
- J. Grandersona, S. Touzani, S. Fernandes, and C. Taylor, “Application of automated measurement and verification to utility energy efficiency program data,” Energy Build., 2017. [Google Scholar]
- S. Touzani, B. Ravache, E. Crowe, and J. Granderson, “Statistical change detection of building energy consumption: Applications to savings estimation,” Energy Build., vol. 185, pp. 123–136, 2019. [Google Scholar]
- C. V. Gallagher, K. Leahy, P. O’Donovan, K. Bruton, and D. T. J. O’Sullivan, “Development and application of a machine learning supported methodology for measurement and verification (M&V) 2.0,” Energy Build., 2018. [PubMed] [Google Scholar]
- D. Chakraborty and H. Elzarka, “Early detection of faults in HVAC systems using an XGBoost model with a dynamic threshold,” Energy Build., 2019. [Google Scholar]
- A. Capozzoli, F. Lauro, and I. Khan, “Fault detection analysis using data mining techniques for a cluster of smart office buildings,” Expert Syst. Appl., 2015. [Google Scholar]
- M. Molina-Solana, M. Ros, M. D. Ruiz, J. Gómez-Romero, and M. J. Martin-Bautista, “Data science for building energy management: A review,” Renewable and Sustainable Energy Reviews. 2017. [Google Scholar]
- Department for Business Energy & Industrial Strategy, “SMART METERING IMPLEMENTATION PROGRAMME Review of the Data Access and Privacy Framework,” no. November, 2018. [Google Scholar]
- G. Bradski and A. Kaehler, Learning OpenCV. 2008. [Google Scholar]
- Y. Ai, M. Peng, and K. Zhang, “Edge computing technologies for Internet of Things: a primer,” Digit. Commun. Networks, 2018. [Google Scholar]
- Integrated Environmental Solutions Limited, “iSCAN: A Single Platform to Optimise the Operational Performance of Buildings,” 2019. [Online]. Available: https://www.iesve.com/icl/iscan. [Google Scholar]
- A. Kurniawan and A. Kurniawan, “Introduction to Raspberry Pi,” in Raspbian OS Programming with the Raspberry Pi, 2019. [CrossRef] [Google Scholar]
- C. Jeanings, Z. Shelby, J. Arkko, A. Keranen, and C. Bormann, “Sensor Measurement Lists (SenML),” 2018. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.