Open Access
Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
---|---|---|
Article Number | 01040 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202018401040 | |
Published online | 19 August 2020 |
- Durul Ulutan, Tugrul Ozel, International Journal of Machine Tools & Manufacture 51, 250-280 (2011) [Google Scholar]
- Elshwain A.E.I., Norizah Redzuan, and Noordin Mohd Yusof, International Journal of Research in Engineering and Technology 2(11), 690-702 (2013) [Google Scholar]
- Salman Pervaiz, Amir Rashid, Ibrahim Deiab, Materials and Manufacturing Processes, 29, 219-252, (2014) [Google Scholar]
- E.O. Ezugwu, International Journal of Machine Tools & Manufacture 45, 1353-1367 (2005) [Google Scholar]
- Thellaputta, Gopala Rao, Pulcharu Subhash Chandra, and C.S.P. Rao, Materials Today: Proceedings 4(2) 3712-3721 (2017) [CrossRef] [Google Scholar]
- Caron J.L., and J.W. Sowards. “Weldability of nickel-base alloys.”, 151-179 (2014) [Google Scholar]
- Choudhury I.A., and M.A. El-Baradie, Journal of Materials Processing Technology 77(1-3), 278-284 (1998) [CrossRef] [Google Scholar]
- Locq, D., and P. Caron. “On some advanced nickel-based superalloys for disk applications.” (2011) [Google Scholar]
- Sroka, M., Jonda, E., Węglowski, M., & Błacha, S, In MATEC Web of Conferences (Vol. 253, p. 03005), EDP Sciences. (2019) [Google Scholar]
- Srinivasa Rao D, Sandhya Rani MN, Sarfaraz Naw az Syed and Suresh Kumar Tummala, E3S Web of Conferences 87 01003 (2019) [CrossRef] [EDP Sciences] [Google Scholar]
- Lachowicz, Maciej, Włodzimierz Dudziński, and Podrez Radziszewska, Materials characterization 59(5), 560-566 (2008) [Google Scholar]
- Shakil, M., M. Ahmad, N.H. Tariq, B.A. Hasan, J.I. Akhter, E. Ahmed, M. Mehmood, M.A. Choudhry, and M. IqbalVacuum, 110, 121-126 (2014) [CrossRef] [Google Scholar]
- J. Kusiński, J. Blicharski, M. Cieniek, Ł. Dymek, S. Rozmus-Górnikowska, M. Solecka, M. Faryj, Mater. Eng. 36, 363 (2015) [Google Scholar]
- Wang, Ting, Ning Li, Yongyun Zhang, Siyuan Jiang, Binggang Zhang, Yong Wang, and Jicai Feng, Vacuum 149, 29-35 (2018) [Google Scholar]
- K.D. Ramkumar, R. Sridhar, S. Periwal, S. Oza, V. Saxena, P. Hidad, N. Arivazhagan, Mater. Des. 68, 158 (2015) [Google Scholar]
- C. Wieding, C. Lochbichler, N. Enzinger, C. Beal, C. Proc. Engineering 86, 184 (2014) [CrossRef] [Google Scholar]
- Ram, GD Janaki, A. Venugopal Reddy, K. Prasad Rao, G. Madhusudhan Reddy, and JK Sarin Sundar, Journal of Materials Processing Technology 167(1), 73-82 (2005) [Google Scholar]
- Tummala Suresh Kumar, Kosaraju Satyanarayana, Materials Today: Proceeding, 26 (2), 2020. [Google Scholar]
- Ramkumar, K. Devendranath, N. Arivazhagan, and S. Narayanan, Materials & Design 40, 70-79 (2012) [Google Scholar]
- Zhao, LiBing, Zhentai Zheng, Zelong Wang, Jianing Qi, Yunfeng Lei, and Meng He, Journal of Engineering Materials and Technology 141(2) (2019) [Google Scholar]
- Radhakrishna C.H., Rao K.P., & S. Srinivas, Journal of materials science letters, 14(24), 1810-1812 (1995) [Google Scholar]
- Grudzień, M., Tuz, L., Pańcikiewicz, K., & A. Zielińska-Lipiec, Advances in Materials Science, 17(2), 55-63 (2017) [Google Scholar]
- S.P. Sridhar, S.A. Kumar, P. Sathiya, Advances in Materials Science 16, 26-37 (2016) [CrossRef] [Google Scholar]
- T. Chu, H. Xu, Z. Li, F. Lu, Materials & Design 165, 107595 (2019) [Google Scholar]
- K. Mageshkumar, N. Arivazhagan, P. Kuppan, Materials Research Express 11, 116579 (2019) [Google Scholar]
- Bankupalli, P.T., Srikanth Babu, V., Suresh Kumar. T, International Journal of Applied Engineering Research, 10(16), 2015 [Google Scholar]
- Henderson M.B., Arrell, D., Larsson, R., Heobel, M., & Marchant, G, Science and technology of welding and joining, 9(1), 13-21 (2004) [Google Scholar]
- Srinivas, K., Vundavalli P.R., & Hussain. M, MS & E, 390(1), 012048 (2018) [Google Scholar]
- Huang C.A., T.H. Wang, C.H. Lee, and W.C. Han, Materials Science and Engineering: A 398(1-2), 275-281 (2005) [CrossRef] [Google Scholar]
- Bemani, M., & Pouranvari, Materials Science and Engineering: A, 773, 138825 (2020) [Google Scholar]
- Siefert J.A., Shingledecker J.P., DuPont J.N., & David, S. A, Science and Technology of Welding and Joining, 21(5), 397-427 (2016) [CrossRef] [Google Scholar]
- Chandra, C. Sharath, K. Nagachary, L. Jayahari, and S.M. Hussaini, Materials Today : Proceedings, 26(2), 3090-3093 (2020) [CrossRef] [Google Scholar]
- Jayahari L, Hussaini SM, Dinesh Varmaa & Srividyadevi P, Advances in Materials and Processing Technologies, 6(2), 233-243 (2020) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.