Open Access
E3S Web Conf.
Volume 193, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2020)
Article Number 01038
Number of page(s) 7
Section Agricultural Science
Published online 08 October 2020
  1. Bratan S and Roshchupkin S 2018 Synthesis of lunberger stochastic observer for estimation of the grinding operation state MATEC Web of Conferences 224 01133. DOI: 10.1051/matecconf/201822401133 [CrossRef] [EDP Sciences] [Google Scholar]
  2. Roshchupkin S and Kharchenko A 2018 Method of building dynamic relations, estimating product and grinding circle shape deviations MATEC Web of Conferences 224 01001. DOI: 10.1051/matecconf/201822401001 [CrossRef] [EDP Sciences] [Google Scholar]
  3. Bratan S, Roshchupkin S and Revenko D 2017 Probabilistic Approach for Modeling Electroerosion Removal of Grinding Wheel Bond Procedia Engineering 206 pp 142-631. DOI: 10.1016/j.proeng.2017.10.656 [Google Scholar]
  4. Bardovsky A D, Gerasimova A A and Basyrov I I 2019 Study of oscillating process of harp screens Lecture Notes in Mechanical Engineering 0(9783319956299) pp 133-139. DOI: 10.1007/978-3-319-95630-5_14 [CrossRef] [Google Scholar]
  5. Gorbatyuk S, Kondratenko V and Sedykh L 2019 Influence of critical speed when working shafts with asymmetrically located monolithic weighting on the accuracy of work surfaces Materials Today: Proceedings 19 pp 2117-20. DOI: 10.1016/j.matpr.2019.07.222 [CrossRef] [Google Scholar]
  6. Bardovsky A D, Gerasimova A A and Basyrov I I 2020 Constructive solutions for upgrading of the drive of processing equipment IOP Conference Series: Materials Science and Engineering 709(2) 022015. DOI: 10.1088/1757-899X/709/2/022015 [CrossRef] [Google Scholar]
  7. Gorbatyuk S, Kondratenko V and Sedykh L 2019 Influence of critical speed when working shafts with symmetrically located monolithic weighting on the accuracy of work surfaces Materials Today: Proceedings 19 pp 2361-64. DOI: 10.1016/j.matpr.2019.07.695 [CrossRef] [Google Scholar]
  8. Chichenev N A 2015 Import-replacing re-engineering of the drive of the rollers in the intermediate roller table of a continuous bloom caster Metallurgist 58(9-10) pp 892-895. DOI: 10.1007/s11015-015-0013-9 [CrossRef] [Google Scholar]
  9. Gerasimova A A, Radyuk A G and Glukhov L M 2014 Applying Coatings to the Narrow Walls of Continuous-Caster Molds to Improve the Quality of the Surface of Slabs Metallurgist 58(5-6) pp 397-400. DOI: 10.1007/s11015-014-9922-2 [CrossRef] [Google Scholar]
  10. Gerasimova A A, Radyuk A G and Titlyanov A E 2016 Wear-resistant aluminum and chromonickel coatings at the narrow mold walls in continuous-casting machines Steel in Translation 46(7) pp 458-462. DOI: 10.3103/S0967091216070068 [CrossRef] [Google Scholar]
  11. Gerasimova A, Mishedchenko O and Devyatiarova V 2020 Determination of temperature conditions for steel plate rolling at Vyksa Steel Works (AO VMZ) IOP Conference Series: Materials Science and Engineering 709(2) 022016. DOI: 10.1088/1757899X/709/2/022016 [CrossRef] [Google Scholar]
  12. Keropyan A, Gorbatyuk S and Gerasimova A 2017 Tribotechnical Aspects of Wheel-Rail System Interaction Procedia Engineering 206 pp 564-569. DOI: 10.1016/j.proeng.2017.10.517 [Google Scholar]
  13. Kobelev O A, Albul S V and Kirillova N L 2020 Research and development of broaching methods on mandrel of large-sized pipe forgings IOP Conference Series: Materials Science and Engineering 709(4) 044104. DOI: 10.1088/1757-899X/709/4/044104 [CrossRef] [Google Scholar]
  14. Gorbatyuk S M, Morozova I G and Naumova M G 2017 Reindustrialization principles in the heat treatment of die steels Steel in Translation 47(5) pp 308-312. DOI: 10.3103/S0967091217050047 [CrossRef] [Google Scholar]
  15. Gorbatyuk S, Kondratenko V (2) and Sedykh L 2019 Investigation of the Deep Hole Drill Stability When Using a Steady Rest Materials Today: Proceedings 11 pp 258-264. DOI: 10.1016/j.matpr.2018.12.140 [CrossRef] [Google Scholar]
  16. Gorbatyuk S, Pashkov A and Chichenev N 2019 Improved Copper-Molybdenum Composite Material Production Technology Materials Today: Proceedings 11(1) pp 31-35. DOI: 10.1016/j.matpr.2018.12.102 [CrossRef] [Google Scholar]
  17. Gerasimova A A, Keropyan A M and Girya A M 2018 Study of the Wheel–Rail System of Open-Pit Locomotives in Traction Mode Journal of Machinery Manufacture and Reliability 47(1) pp 35-38. DOI: 10.3103/S1052618818010065 [CrossRef] [Google Scholar]
  18. Keropyan A M 2016 Features of interaction of traction wheels of an electric locomotive and a diesel locomotive with rails in the conditions of open mountain works Journal of Friction and Wear 37(1) pp 78-82. DOI: 10.3103/S1068366616010074 [CrossRef] [Google Scholar]
  19. Gorbatyuk S M, Pashkov A N, Zarapin A Y and Bardovskii A D 2019 Development of Hot-Pressing Technology for Production of Aluminum-Based Metal-Matrix Composite Materials Metallurgist 62(11-12) pp 1261-66. DOI: 10.1007/s11015-019-00784-0 [CrossRef] [Google Scholar]
  20. Keropyan A M, Gorbatyuk S M, Bibikov P Y and Bardovski A D 2019 Influence of Roughness of Working Surfaces of the Wheel–Rail System of Open-Pit Locomotives with an Implementable Adhesion Coefficient Journal of Friction and Wear 40(1) pp 73-79. DOI: 10.3103/S1068366619010082 [CrossRef] [Google Scholar]
  21. Bibikov P Y, Bardovskiy A D and Keropyan A M 2019 Investigation of press classification process of weak rocks Materials Today: Proceedings 19 pp 2552-54. DOI: 10.1016/j.matpr.2019.08.207 [CrossRef] [Google Scholar]
  22. Gerasimova A, Gorbatyuk S and Devyatiarova V 2018 Application of gas-thermal coatings on low-alloyed steel surfaces Solid State Phenomena 284 SSP pp 1284-90. DOI: 10.4028/ [CrossRef] [Google Scholar]
  23. Gorbatyuk S, Kondratenko V and Sedykh L 2018 Tool stability analysis for deep hole drilling MATEC Web of Conferences 224 01035. DOI: 10.1051/matecconf/201822401035 [CrossRef] [EDP Sciences] [Google Scholar]
  24. Gorbatyuk S M and Sedykh L V 2010 Improving the durability of rolling-mill rolls Metallurgist 54(5-6) pp 299-301. DOI: 10.1007/s11015-010-9297-y [CrossRef] [Google Scholar]
  25. Bast J, Gorbatyuk S M, Kryukov I Yu 2011 Horizontal hcc-12000 unit for the continuous casting of semifinished products Metallurgist 55(1-2) pp 116-118. DOI: 10.1007/s11015011-9399-1 [CrossRef] [Google Scholar]
  26. Gorbatyuk S M, Pavlov V M, Shapoval A N and Gorbatyuk M S 1998 Experimental use of rotary rolling mills to deform compacts of refractory metals Metallurgist 42(5-6) pp 178-183. DOI: 10.1007/BF02766359 [CrossRef] [Google Scholar]
  27. Naumova M G, Morozova I G, Zarapin A Y and Borisov P V 2018 Copper alloy marking by altering its surface topology using laser heat treatment Metallurgist 62(5-6) pp 464-469. DOI: 10.1007/s11015-018-0682-2 [CrossRef] [Google Scholar]
  28. Glukhov L M, Gorbatyuk S M, Morozova I G and Naumova M G 2016 Effective Laser Technology for Making Metal Products and Tools Metallurgist 60(3-4) pp 306-312. DOI: 10.1007/s11015-016-0291-x [CrossRef] [Google Scholar]
  29. Bardovskii A D, Gerasimova A A, Keropyan А M and Bibikow P Y 2018 Influence of the mechanical characteristics of harp screen material on screening process Izvestiya Ferrous Metallurgy 61(9) pp 678-682. DOI: 10.17073/0368-0797-2018-9-678-682 [CrossRef] [Google Scholar]
  30. Busygin A M 2018 The force analysis of the caterpillar excavator stick arrangement mechanism with three degrees of freedom Mining Informational and Analytical Bulletin 2018(1) pp 133-142. DOI: 10.25018/0236-1493-2018-1-0-133-142 [CrossRef] [Google Scholar]
  31. Efremov D B, Gerasimova A A, Gorbatyuk S M and Chichenev N A 2019 Study of kinematics of elastic-plastic deformation for hollow steel shapes used in energy absorption devices CIS Iron and Steel Review 18 pp 30-34. DOI: 10.17580/cisisr.2019.02.06 [CrossRef] [Google Scholar]
  32. Zakharov A N, Gorbatyuk S M and Borisevich V G 2008 Modernizing a press for making refractories Metallurgist 52(7-8) pp 420-423. DOI: 10.1007/s11015-008-9072-5 [CrossRef] [Google Scholar]
  33. Gorbatyuk S M and Kochanov A V 2012 Method and equipment for mechanically strengthening the surface of rolling-mill rolls Metallurgist 56(3-4) pp 279-283. DOI: 10.1007/s11015-012-9571-2 [CrossRef] [Google Scholar]
  34. Gorbatyuk S M, Morozova I G and Naumova M G 2017 Development of the working model of production reindustrialization of die steel heat treatment Izvestiya Ferrous Metallurgy 60(5) pp 410-415. DOI: 10.17073/0368-0797-2017-5-410-415 [CrossRef] [Google Scholar]
  35. Gorbatyuk S M, Osadchii V A and Tuktarov E Z 2011 Calculation of the geometric parameters of rotary rolling by using the utomated design system autodesk inventor Metallurgist 55(7-8) pp 543-546. DOI: 10.1007/s11015-011-9465-8 [CrossRef] [Google Scholar]
  36. Keropyan A and Gorbatyuk S 2016 Impact of Roughness of Interacting Surfaces of the Wheel-Rail Pair on the Coefficient of Friction in their Contact Area Procedia Engineering 150 pp 406-410. DOI: 10.1016/j.proeng.2016.06.753 [Google Scholar]
  37. Radyuk A G, Gorbatyuk S M and Gerasimova A A 2011 Use of electric-arc metallization to recondition the working surfaces of the narrow walls of thick-walled slab molds Metallurgist 55(5-6) pp 419-423. DOI: 10.1007/s11015-011-9446-y [CrossRef] [Google Scholar]
  38. Kartsov S K, Kupriyanov D Y, Polyakov Y A and Zykov A N 2020 Non-local Means Denoising Algorithm Based on Local Binary Patterns Intelligent Systems Reference Library 182 pp. 153-164. DOI: 10.1007/978-3-030-39177-5_12 [CrossRef] [Google Scholar]
  39. Jordan D W and Smith P 2007 Nonlinear Ordinary Differential Equations: An Introduction for Scientists and Engineers (Oxford: Oxford University Press) [Google Scholar]
  40. Naumova M G, Basyrov I I and Aliev Kh B 2018 Reengineering of the ore preparation production process in the context of «almalyk MMC» JSC MATEC Web of Conferences 224 01030. DOI: 10.1051/matecconf/201822401030 [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.