EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 197 (2020) E3S Web Conf., 197 (2020) 11002 References
Open Access
Issue
E3S Web Conf.
Volume 197, 2020
75th National ATI Congress – #7 Clean Energy for all (ATI 2020)
Article Number 11002
Number of page(s) 17
Section Turbomachinery
DOI https://doi.org/10.1051/e3sconf/202019711002
Published online 22 October 2020
  1. Aker, G.F. et al. (1989):“Preditcting Gas Turbine Degradation Due to Compressor Falling Using Computer Simulation Techniques”, in Trans of the ASME, J. of Eng. for Gas Turbine and Power, vol. 111, pp. 343-350; [Google Scholar]
  2. A.M.C. (1992): RD-305 process, Extract, Compton, Airfoil Managemement Company. [Google Scholar]
  3. Aquaro, D. (2004): “Erosion of high temperature resistant materials due to impact of solid particulate: comparison between theoretical and numerical methods”, in Proc. of the AIMETA Int. Tribology Conference, 14-17 September 2004, Rome, pp. 259-268; [Google Scholar]
  4. Armesto, C. et al. (eds.) (1993): GE Aircraft Engines CF6-50 Performance Restoration at a Glance, booklet revisione 1, BIC 4484P (3/93), Cincinnati (Ohio)General Electric Co.; [Google Scholar]
  5. Batcho, P. F. et al. (1987):“Interpretation of Gas Turbine Response Due to Dust Ingestion”, in Trans. of the ASME, J. of Eng. for Gas Turbine and Power, July ’87, vol. 109,pp 344-352; [CrossRef] [Google Scholar]
  6. Boynton, S.L. et al. (1993): “Investigation of Rotor Blade Roughness Effects on Turbine Performance” in Trans. of the ASME, J. of Turbomachinery, vol. 1115, July 1993, pp. 614-620; [CrossRef] [Google Scholar]
  7. Calvert, W. (1994): “Prevent damage to gas turbines from ice ingestion”, in Power, Oct.’94, pp. 73-75; [Google Scholar]
  8. Chow, Ronald et al. (1995): “Coatings Limit Compressor Fouling”, in Turbomachinery International Journal, feb. ’95, pp. 34-36; [Google Scholar]
  9. Damonte, N. (1994): “Il problema energetico nei trasporti aerei commerciali: innovazioni tecniche in atto e progetti per gli anni 2000”, in Trasporti e Trazione, n°5, ottobre ’94, pp. 226-234; [Google Scholar]
  10. De Pratti, G.M. – Arrighetti, C. (2009): “Analisi sperimentale del decadimento per erosione e fouling delle prestazioni di compressori assiali aeronautici”, in Proc. of the ATI Congress at Montesilvano, pp. 9; [Google Scholar]
  11. Ericsson, L. E. (1980): “Karman Vortex Shedding and the effect of body motion”, in AIAA Journal, Article n° 79-1531R, vol. 18, n° 8, aug. ’80, pp. 935-944; [Google Scholar]
  12. Eroglu, H et al. (1990): “Effect of Inlet Flow Angle on the Erosion of Radial Turbine Guide Vanes”, in Trans. of the ASME, J. of Turbomachinery, Jan. ’90, vol. 112, pp. 64-70; [CrossRef] [Google Scholar]
  13. Kurz, R. – Brun, K. (2012): Fouling Mechanism in Axial Compressors, J. Eng. Gas Turbine Power, Mar. 2012, 134(3): 032401, pp. 9; [CrossRef] [Google Scholar]
  14. Lakshminarasimha, A. N. et al. (1994):“Modeling and Analysis of Gas Turbine Performance Deterioration”, in Trans. of the ASME, J. of Gas Turbine and Power, Jan. ’94, vol. 116, pp. 46-52; [CrossRef] [Google Scholar]
  15. Metwally, M. et al. (1995): “Blade Erosion in Automotive Gas Turbine Engine”, in Trans. of the ASME, J. of Eng. for Gas Turbines and Power, vol. 117, Jan. 95, pp. 213-219; [CrossRef] [Google Scholar]
  16. Natole, R. (1995): “Gas Turbine Components-Repair or Replace”, in IGTI Global Gas Turbine News, May/June ’95, pp. 4-7; [Google Scholar]
  17. Orlin, J. W. et al. (1947) : “Application of the Analogy between Water Flow with a Free Surface and Two-Dimensional Compressible Gas Flow”, NACA Report n° 875, pp. 18; [Google Scholar]
  18. Paoli, R. – Shariff, K. (2003): “Particle size distributions in atmospheric clouds”, in Ann. Research Briefs 2003, NASA-Center for Turbulence Research, Moffett Field, pp. 39-47; [Google Scholar]
  19. Page, G. J. et al. (2007) : Large Eddy Simulation of a Harrier Aircraft at Touch Down, in AIAA 2007-4294, pp. 12; [Google Scholar]
  20. Ramsden, K. W. (2006): Axial Compressor design and performance, Course Notes 2006, Cranfield University (UK); [Google Scholar]
  21. Soares, C. (2015): Inlet Angle in Compressor, in Gas Turb ines, 2nd Ed., pp. 15; [Google Scholar]
  22. Tabakoff, W. et al. (1990):“Simulation of Compressor Performance Deterioration Due to Erosion”, in Trans. of the ASME, J. of Turbomachinery, Jan. ’90, vol. 112, pp. 78-83; [CrossRef] [Google Scholar]
  23. Taylor, R. P. (1990):“Surface Roughness Measurements of Gas Turbine Blades”, in Trans. of the ASME, J. of Turbomachinery, April ’90, vol. 112, pp. 175-180. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.