Open Access
| Issue |
E3S Web Conf.
Volume 201, 2020
Ukrainian School of Mining Engineering - 2020
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/e3sconf/202020101006 | |
| Published online | 23 October 2020 | |
- Toshov, J.B. (2016). The Questions of the Dynamics of Drilling Bit on the Surface of Well Bottom. Archives of Mining Sciences, 61(2), 275-283. https://doi.org/10.1515/amsc-2016-0020 [CrossRef] [Google Scholar]
- Morozov, L.V. (2003) Improving the durability of drill bits based on computer analysis of structural elements and their assembly. PhD Thesis. Samara, Russia: SamGTU. [Google Scholar]
- Shigin, A.O., & Gilyov, A.V. (2012). Metodika rascheta ustalostnoy prochnosti kak osnovnogo faktora stoykosti sharoshechnykh dolot. Vestnik Irkutskogo Gosudarstvennogo Tekhnicheskogo Universiteta, (3), 22-27. [Google Scholar]
- Poderni R.Yu. (2001). Gornye mashiny i kompleksy dlya otkrytykh gornykh rabot. Moskva: Moskovskiy gosudarstvennyy universitet, 442. [Google Scholar]
- Shigina A.A., Shigin A.O., Stupina A.A. (2012). Sravnitel’naya otsenka metodov analiza effektivnosti funktsionirovaniya burovykh stankov. Sovremennye Problemy Nauki i Obrazovaniya, (6), 117. [Google Scholar]
- Mannanov, U., Toshov, J., & Toshniyozov L. (2019). Perspective Solutions for the Design of Drilling Tools. E3S Web of Conferences, (105), 03027.https://doi.org/10.1051/e3sconf/201910503027 [Google Scholar]
- Blinkov, O.G., & Serdyuk N.I. (2017). Germetiziruyushchie ustroystva opor sharoshechnykh dolot dlya vysokooborotnogo bureniya. Territoriya “Neftegaz”, (3), 12-16. [Google Scholar]
- Toshov, J.B. (2016). Ways towards optimization of washout components of rock cutting tools. Gornyi Zhurnal, (2), 21-24. http://dx.doi.org/10.17580/gzh [CrossRef] [Google Scholar]
- Karvanen, A.Ye. (2014). Reglament tekhnicheskogo obsluzhivaniya i remonta rolikovykh konusnykh burovykh instrumentov. Molodezh’ i nauka-2014. Krasnoyarsk, Russia: Sibirskiy federal’nyy universitet. [Google Scholar]
- Gribennikov, N.V., Boyarskikh, G.A., & Boyarskikh, I.G. (2013). Sravnitel’naya otsenka predel’nogo sostoyaniya konstruktivnykh elementov nerazbornykh i razbornykh burovykh sharoshechnykh dolot. Izvetiya Ural’skogo Gosudarstvennogo Universiteta, 1(29),43-55. [Google Scholar]
- Toshniyozov L.G., & Toshov, J.B. (2019). Analiz teoreticheskikh i eksperimental’nykh issledovaniy v oblasti protsessa sal’nikoobrazovaniya pri burenii skvazhin. Gornyy Informatsionno-Analiticheskiy Byulleten’, (11), 139-151. https://doi.org/10.25018/02361493-2019-11-0-139-151 [Google Scholar]
- Lu, Z., Wan, L., Zeng, Q., Zhang, X., & Gao, K. (2017). Numerical Simulation of Fragment Separation during Rock Cutting Using a 3D Dynamic Finite Element Analysis Code. Advances in Materials Science and Engineering 2017, 1-17. https://doi.org/10.1155/2017/3024918 [Google Scholar]
- Labra, C., Rojek, J., & Onate, E. (2016). Discrete/Finite Element Modelling of Rock Cutting with a TBM Disc Cutter. Rock Mechanics and Rock Engineering, 50(3),621-638. https://doi.org/10.1007/s00603-016-1133-7 [Google Scholar]
- Huang, K., Ai, Z., & Yang, Y. (2019). Working characteristics research on the impacting-cutting hybrid bit. Advances in Mechanical Engineering, 11(5), 168781401985094. https://doi.org/10.1177/1687814019850941 [CrossRef] [Google Scholar]
- Jaime, M. C., Zhou, Y., Lin, J.-S., & Gamwo, I. K. (2015). Finite element modeling of rock cutting and its fragmentation process. International Journal of Rock Mechanics and Mining Sciences, (80), 137-146. https://doi.org/10.1016/uirmms.2015.09.004 [CrossRef] [Google Scholar]
- Pawar, P., Ballav, R., & Kumar, A. (2017). Modeling and Simulation of Drilling Process in Ti- 6Al-4V, Al6061 Using Deform-3D Software. International Journal of ChemTech Research, 10(3),137-142. [Google Scholar]
- Gopichand, A., Veera Brahmam, M., Bhanuprakash, D. (2014). Numerical Simulation and Analysis of Friction Drilling Process for Alumina Alloy using Ansys. International Journal of Engineering Research & Technology, 5(12),602-607. [Google Scholar]
- Abdul-Rani, A.M., Ismail, M.Z., Zaky, M.A., Noor, M.H.M., Zhun, Y.Y., Ganesan, K., … Ginta, T.L. (2014). Improving Rate of Penetration for PDC Drill Bit Using Reverse Engineering. Applied Mechanics and Materials, (607), 153-160. https://doi.org/10.4028/www.scientific.net/amm.607.153 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.