Mathematical model of the mechanism of the "alpha" type Stirling engine for operation in the timber industry complex

Еvgenii Tihonov; Valentin Bazykin; Olga Gerasimova; Sergey Soloviev

doi:10.1051/e3sconf/202021008010

All issues

Volume 210 (2020)

E3S Web Conf., 210 (2020) 08010

References

Open Access

Issue		E3S Web Conf. Volume 210, 2020 Innovative Technologies in Science and Education (ITSE-2020)


Article Number		08010
Number of page(s)		15
Section		Agricultural Machinery
DOI		https://doi.org/10.1051/e3sconf/202021008010
Published online		04 December 2020

G. Popa, M. A. Gheți, Locomotive Diesel Engine Operation with Optimal Specific Fuel Consumption, Procedia Manufacturing, 46, 440-444, ISSN 2351-9789 (2020) https://doi.org/10.1016/j.promfg.2020.03.064. [CrossRef] [Google Scholar]
J.-H. Cho, C. S. Lin, C. D. Richards, R. F. Richards, J. Ahn, P. D. Ronney, Demonstration of an external combustion micro-heat engine, Proceedings of the Combustion Institute, 32(2), 3099-3105, ISSN 1540-7489 (2009) https://doi.org/10.1016/j.proci.2008.07.017. [CrossRef] [Google Scholar]
P. Breeze, Chapter 6 - Stirling Engines and Free Piston Engines, Editor(s): Paul Breeze, Piston Engine-Based Power Plants, Academic Press, 59-70, ISBN 9780128129043 (2018) https://doi.org/10.1016/B978-0-12-812904-3.00006-9. [Google Scholar]
F. Xin, Z. Liu, S. Wang, W. Liu, Study of heat transfer in oscillatory flow for a Stirling engine heating tube inserted with spiral spring, Applied Thermal Engineering, 143, 182-192, ISSN 1359-4311 (2018) https://doi.org/10.1016/j.applthermaleng.2018.07.071. [CrossRef] [Google Scholar]
S. Alfarawi, R. AL-Dadah, S. Mahmoud, Influence of phase angle and dead volume on gamma-type Stirling engine power using CFD simulation, Energy Conversion and Management, 124, 130-140, ISSN 0196-8904 (2016) https://doi.org/10.1016/j.enconman.2016.07.016. [CrossRef] [Google Scholar]
B. B. Kosenok, V. B. Balyakin, I. N. Giltsov, The Use of Vector Models to Study the Dynamic Characteristics of an Advanced Two-Shaft Internal Combustion Engine, Procedia Engineering, 176, 37-42, ISSN 1877-7058, (2017) https://doi.org/10.1016/j.proeng.2017.02.270. [CrossRef] [Google Scholar]
C. Gu, L. Botto, FIPI: A fast numerical method for the simulation of particle-laden fluid interfaces, Computer Physics Communications, 256, 107447, ISSN 0010-4655, (2020) https://doi.org/10.1016/j.cpc.2020.107447. [CrossRef] [Google Scholar]
D. Smirnov, V. Dvortsov, A. Saichenko, M. Tkachenko, M. Kukolev, A. Bischi, H. Ouerdane, Experimental study of a high-tolerance piston-cylinder pair in the alpha Ross-yoke Stirling refrigerator, International Journal of Refrigeration, 100, 235-245, ISSN 0140-7007 (2019) https://doi.org/10.1016/j.ijrefrig.2019.01.018. [CrossRef] [Google Scholar]
B. Rutczyk, I. Szczygieł, A. Kabaj, Evaluation of an α type stirling engine regenerator using a new differential model, Energy, 209, 118369, ISSN 0360-5442 (2020) https://doi.org/10.1016/j.energy.2020.118369. [CrossRef] [Google Scholar]
Y. Guo, Y. Chao, B. Wang, Y. Wang, Z. Gan, A general model of Stirling refrigerators and its verification, Energy Conversion and Management, 188, 54-65, ISSN 0196-8904 (2019) https://doi.org/10.1016/j.enconman.2019.03.029. [CrossRef] [Google Scholar]
T. Palander, H. Haavikko, K. Kärhä, Towards sustainable wood procurement in forest industry – The energy efficiency of larger and heavier vehicles in Finland, Renewable and Sustainable Energy Reviews, 96, 100-118, ISSN 1364-0321 (2018) https://doi.org/10.1016/j.rser.2018.07.043. [CrossRef] [Google Scholar]
M. Manzone, Efficiency of a compactor in wood chip volume reduction, Biomass and Bioenergy, 80, 303-306, ISSN 0961-9534 (2015) https://doi.org/10.1016/j.biombioe.2015.06.007. [CrossRef] [Google Scholar]
T. Chungcharoen, N. Srisang, Preparation and characterization of fuel briquettes made from dual agricultural waste: Cashew nut shells and areca nuts, Journal of Cleaner Production, 256, 120434, ISSN 0959-6526, (2020) https://doi.org/10.1016/j.jclepro.2020.120434. [CrossRef] [Google Scholar]
C. Song, C. Zhang, S. Zhang, H. Lin, Y. Kim, uthusamy Ramakrishnan, Yanqiang Du, Yan Zhang, Huabao Zheng, Damia Barcelo, Thermochemical liquefaction of agricultural and forestry wastes into biofuels and chemicals from circular economy perspectives, Science of The Total Environment, 141972, ISSN 0048-9697 (2020) https://doi.org/10.1016/j.scitotenv.2020.141972. [CrossRef] [Google Scholar]
J. Park, H. Kim, J. Ko, S. In, Y. Hong, H. Yeom, S. Park, Free-piston Stirling cryocooler (FPSC) for low-temperature applications down to 110 K, International Journal of Refrigeration, 117, 218-229, ISSN 0140-7007, (2020) https://doi.org/10.1016/j.ijrefrig.2020.04.020. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] G. Popa, M. A. Gheți, Locomotive Diesel Engine Operation with Optimal Specific Fuel Consumption, Procedia Manufacturing, 46, 440-444, ISSN 2351-9789 (2020) https://doi.org/10.1016/j.promfg.2020.03.064. [CrossRef] [Google Scholar]

[2] J.-H. Cho, C. S. Lin, C. D. Richards, R. F. Richards, J. Ahn, P. D. Ronney, Demonstration of an external combustion micro-heat engine, Proceedings of the Combustion Institute, 32(2), 3099-3105, ISSN 1540-7489 (2009) https://doi.org/10.1016/j.proci.2008.07.017. [CrossRef] [Google Scholar]

[3] P. Breeze, Chapter 6 - Stirling Engines and Free Piston Engines, Editor(s): Paul Breeze, Piston Engine-Based Power Plants, Academic Press, 59-70, ISBN 9780128129043 (2018) https://doi.org/10.1016/B978-0-12-812904-3.00006-9. [Google Scholar]

[4] F. Xin, Z. Liu, S. Wang, W. Liu, Study of heat transfer in oscillatory flow for a Stirling engine heating tube inserted with spiral spring, Applied Thermal Engineering, 143, 182-192, ISSN 1359-4311 (2018) https://doi.org/10.1016/j.applthermaleng.2018.07.071. [CrossRef] [Google Scholar]

[5] S. Alfarawi, R. AL-Dadah, S. Mahmoud, Influence of phase angle and dead volume on gamma-type Stirling engine power using CFD simulation, Energy Conversion and Management, 124, 130-140, ISSN 0196-8904 (2016) https://doi.org/10.1016/j.enconman.2016.07.016. [CrossRef] [Google Scholar]

[6] B. B. Kosenok, V. B. Balyakin, I. N. Giltsov, The Use of Vector Models to Study the Dynamic Characteristics of an Advanced Two-Shaft Internal Combustion Engine, Procedia Engineering, 176, 37-42, ISSN 1877-7058, (2017) https://doi.org/10.1016/j.proeng.2017.02.270. [CrossRef] [Google Scholar]

[7] C. Gu, L. Botto, FIPI: A fast numerical method for the simulation of particle-laden fluid interfaces, Computer Physics Communications, 256, 107447, ISSN 0010-4655, (2020) https://doi.org/10.1016/j.cpc.2020.107447. [CrossRef] [Google Scholar]

[8] D. Smirnov, V. Dvortsov, A. Saichenko, M. Tkachenko, M. Kukolev, A. Bischi, H. Ouerdane, Experimental study of a high-tolerance piston-cylinder pair in the alpha Ross-yoke Stirling refrigerator, International Journal of Refrigeration, 100, 235-245, ISSN 0140-7007 (2019) https://doi.org/10.1016/j.ijrefrig.2019.01.018. [CrossRef] [Google Scholar]

[9] B. Rutczyk, I. Szczygieł, A. Kabaj, Evaluation of an α type stirling engine regenerator using a new differential model, Energy, 209, 118369, ISSN 0360-5442 (2020) https://doi.org/10.1016/j.energy.2020.118369. [CrossRef] [Google Scholar]

[10] Y. Guo, Y. Chao, B. Wang, Y. Wang, Z. Gan, A general model of Stirling refrigerators and its verification, Energy Conversion and Management, 188, 54-65, ISSN 0196-8904 (2019) https://doi.org/10.1016/j.enconman.2019.03.029. [CrossRef] [Google Scholar]

[11] T. Palander, H. Haavikko, K. Kärhä, Towards sustainable wood procurement in forest industry – The energy efficiency of larger and heavier vehicles in Finland, Renewable and Sustainable Energy Reviews, 96, 100-118, ISSN 1364-0321 (2018) https://doi.org/10.1016/j.rser.2018.07.043. [CrossRef] [Google Scholar]

[12] M. Manzone, Efficiency of a compactor in wood chip volume reduction, Biomass and Bioenergy, 80, 303-306, ISSN 0961-9534 (2015) https://doi.org/10.1016/j.biombioe.2015.06.007. [CrossRef] [Google Scholar]

[13] T. Chungcharoen, N. Srisang, Preparation and characterization of fuel briquettes made from dual agricultural waste: Cashew nut shells and areca nuts, Journal of Cleaner Production, 256, 120434, ISSN 0959-6526, (2020) https://doi.org/10.1016/j.jclepro.2020.120434. [CrossRef] [Google Scholar]

[14] C. Song, C. Zhang, S. Zhang, H. Lin, Y. Kim, uthusamy Ramakrishnan, Yanqiang Du, Yan Zhang, Huabao Zheng, Damia Barcelo, Thermochemical liquefaction of agricultural and forestry wastes into biofuels and chemicals from circular economy perspectives, Science of The Total Environment, 141972, ISSN 0048-9697 (2020) https://doi.org/10.1016/j.scitotenv.2020.141972. [CrossRef] [Google Scholar]

[15] J. Park, H. Kim, J. Ko, S. In, Y. Hong, H. Yeom, S. Park, Free-piston Stirling cryocooler (FPSC) for low-temperature applications down to 110 K, International Journal of Refrigeration, 117, 218-229, ISSN 0140-7007, (2020) https://doi.org/10.1016/j.ijrefrig.2020.04.020. [CrossRef] [Google Scholar]