Open Access
Issue
E3S Web Conf.
Volume 233, 2021
2020 2nd International Academic Exchange Conference on Science and Technology Innovation (IAECST 2020)
Article Number 01056
Number of page(s) 5
Section NESEE2020-New Energy Science and Environmental Engineering
DOI https://doi.org/10.1051/e3sconf/202123301056
Published online 27 January 2021
  1. LIU Zhiqiang. Research on process and key technologies of raise boring[J]. Coal Science and Technology, 47(5): 12-21 (2019) [Google Scholar]
  2. HAN Bo, LIU Zhiqiang, JING Guoye, et al. Development and application of experiment device for rock fragmentation by rolling cutter[J]. Coal Mine Machinery, 36(12): 214-217 (2015) [Google Scholar]
  3. JING Guoye. Research on key construction technology of large diameter raise boring through special stratum[J]. Coal Engineering, 51(5): 68-72 (2019) [Google Scholar]
  4. CHENG Shouye. Study and application of raise-boring method for deep vertical shaft of railway tunnel construction: a case study of dangjinshan tunnel[J]. Tunnel Construction, 38(9): 1560-1565 (2018) [Google Scholar]
  5. LIU Huixin, MENG Yingfeng. New technology to drill horizontal wells with under-balance pressure by air injection[J]. Petroleum Exploration and Development, 32(1): 100-102 (2005) [Google Scholar]
  6. SHEN Zhonghou. Development trend of the modern drilling technology[J]. Petroleum Exploration and Development, 32(1): 89-91 (2005) [Google Scholar]
  7. YAO Jianlin. Investigations of flow field in annulus and erosion characteristics on the pipe with cuttings in gas drilling[D]. Shanghai University (2011) [Google Scholar]
  8. LIU Zhiqiang. Development status and prospect of mine raise boring technology and equipment[J]. Coal Science and Technology, 45(8): 66-73 (2017) [Google Scholar]
  9. LIU Zhiqiang. Study on the key drilling technology by large-diameter raise boring machine[D]. University of Science and Technology Beijing (2015) [Google Scholar]
  10. ZHU Lihong. Researches on fluid-dynamic parameters of pneumatic DTH hammer reverse circulation drilling system used in oil-gas exploration[D]. Jilin University (2010) [Google Scholar]
  11. ZHANG Shurui. Research on key technologies for gas drilling in daqing oil field[D]. Northeast Petroleum University (2011) [Google Scholar]
  12. CUI Zhijian. A new method for calculating air drilling parameters[J]. Journal of Jianghan Petroleum Institute, (4): 64-68 (1996) [Google Scholar]
  13. WANG Zhongsheng, LIAO Bing. Analysis and calculation of circulation parameter in reverse circulation air drilling of double-wall drill pipe[J]. Drilling and Production technology, 31(3): 1-4+149 (2008) [Google Scholar]
  14. ZHAO Yerong, MENG Yingfeng, LEI Tong, et al. Theory and practice of gas drilling[M]. Beijing: Petroleum Industry Press (2007) [Google Scholar]
  15. SU Yinao, ZHOU Chuan, DOU Xiurong. Operation characteristics analysis and process parameters selection of air drilling[J]. Petroleum Exploration and Development, 32(2): 86-90+122 (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.