Open Access
E3S Web Conf.
Volume 328, 2021
International Conference on Science and Technology (ICST 2021)
Article Number 02014
Number of page(s) 4
Section Electrical, Intrumentation and control, Dynamic Electricity
Published online 06 December 2021
  1. Nalaprana Nugroho, Sri Agustina, “ANALISA MOTOR DC (DIRECT CURRENT) SEBAGAI PENGGERAK MOBIL LISTRIK” Journal Mikrotiga, Vol 2, No 1, (2015) [Google Scholar]
  2. Evaristus Chandler Sunarto1, Bekti Yulianti 1, “Rancang Bangun Prototipe Alat Angkut Helikopter Berbasis Arduino”, Jurnal Tesla, Vol 20, No 2, Oktober (2018) [Google Scholar]
  3. Adewasti, Emilia Hesti, Sholihin, Sarjana, “SISTEM KENDALI ROBOT HAND GESTURE BERBASIS WIRELESS”, Jurnal Surya Energy Vol 3, No 1, (2018). [Google Scholar]
  4. Suhendra Tonny, et, al, “Kendali Kecepatan Motor DC dengan Metode Pulse Width Modulation menggunakan N-channel Mosfet”, Jurnal Sustainable: Jurnal Hasil Penelitian dan Industri Terapan, Vol 07, no. 02, (2018). [Google Scholar]
  5. N. Tadrist and H. Zeroug, “Development of brushless DC motor drive system for teaching purposes using various PWM control techniques for speed control,” 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), (2014), pp. 1-4, doi: 10.1109/COMPEL.2014.6877150. [Google Scholar]
  6. P. H. Karnavar and V. R. Jisha, “Harmonic Reduction and Power Factor Improvement of BLDC Motor Drive System Using a Selective Harmonic Elimination PWM Based Controller,” 2020 International Conference on Power, Instrumentation, Control and Computing (PICC), (2020), pp. 1-5, doi: 10.1109/PICC51425.2020.9362432. [Google Scholar]
  7. K. J.P., N. Withana, K. Gallage, J. Wijayarathna and A. Wijethilake, “Development of a Programmable Mechanical Motor Loading Unit using a DC Motor,” 2019 Moratuwa Engineering Research Conference (MERCon), (2019), pp. 211-215, doi: 10.1109/MERCon.2019.8818829. [Google Scholar]
  8. M. P. Ciurys, “Brushless DC motor with a vane pump built in and with speed control using PWM method,” 2017 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF) Book of Abstracts, (2017), pp. 1-2, doi: 10.1109/ISEF.2017.8090704. [Google Scholar]
  9. X. Yao, Y. Zhang and X. Jiang, “A novel PWM_OFF_PWM mode for braking operation of brushless DC motor,” IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, (2017), pp. 1711-1716, doi: 10.1109/IECON.2017.8216290. [CrossRef] [Google Scholar]
  10. Y. Tan, A. Setiaji, E. Wismiana, M. Yunus, M. R. Effendi and A. Munir, “IoT System Implementation for ATmega328 Microcontroller Based Home Door Control,” 2019 IEEE 5th International Conference on Wireless and Telematics (ICWT), (2019), pp. 1-4, doi: 10.1109/ICWT47785.2019.8978214. [Google Scholar]
  11. M. F. Fahmi, A. S. Rohman, H. Hindersah and E. M. I. Hidayat, “Sliding Mode Position Control of BLDC Motor with Nonlinear Load Torque in a Locomotive Simulator Platform,” 2019 2nd International Conference of Intelligent Robotic and Control Engineering (IRCE), (2019), pp. 78-84, doi: 10.1109/IRCE.2019.00023. [CrossRef] [Google Scholar]
  12. M. F. Fahmi, A. S. Rohman, H. Hindersah and E. M. I. Hidayat, “Position Control of BLDC Motor with Nonlinear Load Torque in a Locomotive Simulator Platform,” 2019 IEEE 9th International Conference on System Engineering and Technology (ICSET), (2019), pp. 221-226, doi: 10.1109/ICSEngT.2019.8906385. [CrossRef] [Google Scholar]
  13. A. I. Aulia, M. Faswia Fahmi, H. Hindersah, A. S. Rohman and E. Muhammad Idris Hidayat, “Implementation of Motion Cueing and Motor Position Control for Vehicle Simulator with 4-DOF-Platform,” 2019 6th International Conference on Electric Vehicular Technology (ICEVT), (2019), pp. 40-45, doi: 10.1109/ICEVT48285.2019.8994028. [CrossRef] [Google Scholar]
  14. Deni Tri Laksono, et, al,“ Automatic Coffee Maker Berbasis Arduino Mega”, Jurnal Triac, Vol 7, No 1, (2020), DOI: [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.