E3S Web Conf.
Volume 238, 2021100RES 2020 – Applied Energy Symposium (ICAE), 100% RENEWABLE: Strategies, Technologies and Challenges for a Fossil Free Future
|Number of page(s)||4|
|Published online||16 February 2021|
- G. Pirasteh, R. Saidur, S. M. A. Rahman, and N. A. Rahim, “A review on the development of solar drying applications, ” Renew. Sustain. Energy Rev., Vol. 31, pp. 133–148, 2014. [Google Scholar]
- S. H. Farjana, N. Huda, M. A. P. Mahmud, and R. Saidur, “Solar process heat in industrial systems – A global review, ” Renew. Sustain. Energy Rev., Vol. 82, no. August 2017, pp. 2270–2286, 2018. [Google Scholar]
- A. K. Sharma, C. Sharma, S. C. Mullick, and T. C. Kandpal, “Solar industrial process heating: A review, ” Renew. Sustain. Energy Rev., Vol. 78, no. December 2016, pp. 124–137, 2017. [Google Scholar]
- A. Famiglietti, A. Lecuona-Neumann, J. Nogueira, and M. Rahjoo, “Direct solar production of medium temperature hot air for industrial applications in linear concentrating solar collectors using an open Brayton cycle. Viability analysis, ” Vol. 169, no. September 2019, 2020. [Google Scholar]
- Solatom, “SOLAR STEAM FOR INDUSTRIAL PROCESSES.” [Online]. Available: http://www.solatom.com/. [Google Scholar]
- S. Karathanasis, Linear Fresnel Reflector Systems for Solar Radiation Concentration. 2019. [Google Scholar]
- A. Heimsath, G. Bern, D. Van Rooyen, and P. Nitz, “Quantifying optical loss factors of small linear concentrating collectors for process heat application, ” Energy Procedia, Vol. 48, no. September 2013, pp. 77–86, 2014. [Google Scholar]
- L. Guzzella and C. H. Onder, Introduction to modeling and control of internal combustion engine systems. 2010. [Google Scholar]
- S. A. Frei, L. Guzzella, C. H. Onder, and C. Nizzola, “Improved dynamic performance of turbocharged SI engine power trains using clutch actuation, ” Control Eng. Pract., Vol. 14, no. 4, pp. 363–373, 2006. [Google Scholar]
- A. Habte et al., “Best Practices Handbook for the Collection and Use of Solar Resource Data for Solar Energy Applications: Second Edition, ” NREL, no. December 2017, pp. 2.12.22, 2017. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.