Open Access
Issue
E3S Web Conf.
Volume 246, 2021
Cold Climate HVAC & Energy 2021
Article Number 03004
Number of page(s) 6
Section Renewable Energy Production
DOI https://doi.org/10.1051/e3sconf/202124603004
Published online 29 March 2021
  1. M. Guasco, M. Orlanno, C. Piccardo, A. Giachetta, and A. Dodoo, “Design optimization of a building attached sunspace through experimental monitoring and dynamic modelling,” E3S Web of Conferences, 172, 03010, 2020. [EDP Sciences] [Google Scholar]
  2. M. Fernandez-Antolin, J. del Río, V. Costanzo, F. Nocera, and R. Gonzalez-Lezcano, “Passive design strategies for residential buildings in different Spanish climate zones,” Sustainability, 11, 4816, 2019. [Google Scholar]
  3. G. Chiesa, M. Simonetti, and G. Ballada, “Potential of attached sunspaces in winter season comparing different technological choices in Central and Southern Europe,” Energy Build., 138, 377–395, 2017. [Google Scholar]
  4. D. Ignjatovic, M. Popovic, and J. Kavran, “Application of sunspaces in fostering energy efficiency and economical viability of residential buildings in Serbia,” Energy Build., 98, 3–9, 2015. [Google Scholar]
  5. R. Puertolas, J. Gonzalez, S. Castro, P. Benito, and C. Arrebola, “A bioclimatic building in Madrid: Analysis of the thermal response and long-term comfort indices review,” Developments in the Built Environment, 3, 100015, 2020. [Google Scholar]
  6. G. Ulpiani, D. Giuliani, A. Romagnoli, and C. di Perna, “Experimental monitoring of a sunspace applied to a NZEB mock-up: Assessing and comparing the energy benefits of different configurations,” Energy Build., 152, 194–215, 2017. [Google Scholar]
  7. E. Conceição, J. Gomes, and H. Awbi, “Influence of the airflow in a solar passive building on the indoor air quality and thermal comfort levels,” Atmosphere, 10, 766, 2019. [Google Scholar]
  8. E. Conceição and M. Lúcio, “Numerical simulation of passive and active solar strategies in building with complex topology,” Build. Simul., 3, 245–261, 2010. [Google Scholar]
  9. E. Conceição, J. Farinho, and M. Lúcio, “Evaluation of indoor air quality in classrooms equipped with cross-flow ventilation,” Int. J. Vent., 11(1), 53–68, 2012. [Google Scholar]
  10. E. Conceição, M. Lúcio, and M. Lopes, “Application of an indoor greenhouse in the energy and thermal comfort performance in a kindergarten school building in the south of Portugal in winter conditions,” WSEAS Trans. Environ. Dev, 4, 644–654, 2008. [Google Scholar]
  11. E. Conceição and M. Lúcio, “Numerical study of the thermal efficiency of a school building with complex topology for different orientations,” Indoor Built Environ., 18, 41–51, 2009. [Google Scholar]
  12. P. Fanger, Thermal comfort: analysis and applications in environmental engineering. Danish Technical Press, Copenhagen, Denmark, 1970. [Google Scholar]
  13. ANSI/ASHRAE Standard 55, Thermal Environmental Conditions for Human Occupancy. American Society of Heating, Refrigerating and Air-Conditioning Engineers: Atlanta, GA, USA, 2017. [Google Scholar]
  14. ISO 7730, Ergonomics of the thermal environments – Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria. International Standard Organization: Geneva, Switzerland, 2005. [Google Scholar]
  15. E. Conceição, and M. Lúcio, “Numerical simulation of the application of solar radiant systems, internal airflow and occupants’ presence in the improvement of comfort in winter conditions,” Buildings, 6(3), 38, 2016. [Google Scholar]
  16. E. Conceição, M. Lúcio, A. Ruano, and E. Crispim, “Development of a temperature control model used in HVAC systems in school spaces in Mediterranean climate,” Build. Environ., 44, 871–877, 2009. [Google Scholar]
  17. E. Conceição, A. Nunes, J. Gomes, and M. Lúcio, “Application of a school building thermal response numerical model in the evolution of the adaptive thermal comfort level in the Mediterranean environment,” Int. J. Vent., 9(3), 287–304, 2010. [Google Scholar]
  18. E. Conceição, J. Gomes, and A. Ruano, “Application of HVAC systems with control based on PMV index in university buildings with complex topology,” IFAC PapersOnLine, 51–10, 20–25, 2018. [Google Scholar]
  19. A. Asif, M. Zeeshan, and M. Jahanzaib, “Indoor temperature, relative humidity and CO2 levels assessment in academic buildings with different heating, ventilation and air-conditioning systems,” Build. Environ., 133, 83–90, 2018. [Google Scholar]
  20. A. Persily and L. de Jonge, “Carbon dioxide generation rates for buildings occupants,” Indoor Air, 27, 868–879, 2017. [Google Scholar]
  21. ANSI/ASHRAE Standard 62–1, Ventilation for Acceptable Indoor Air Quality. American Society of Heating, Refrigerating and Air-Conditioning Engineers: Atlanta, GA, USA, 2016. [Google Scholar]
  22. E. Conceição, M. Lúcio, V. Vicente, and V. Rosão, “Evaluation of local thermal discomfort in a classroom equipped with cross flow ventilation,” Int. J. Vent., 7(3), 267–277, 2008. [Google Scholar]
  23. E. Conceição, S. Rosa, A. Custódio, R. Andrade, M. Meira, and M. Lúcio, “Study of airflow around occupants seated in desks equipped with upper and lower air terminal devices for slightly warm environments,” HVAC&R Res., 16(4), 401–412, 2010. [Google Scholar]
  24. E. Conceição, M. Lúcio, and H. Awbi, “Comfort and airflow evaluation in spaces equipped with mixing ventilation and cold radiant floor,” Build. Simul., 6, 51–67, 2013. [Google Scholar]
  25. E. Conceição, A. Silva, and M. Lúcio, “Numerical study of thermal response of school buildings in winter conditions,” In Proceedings of the 9th Conference on Air Distribution in Rooms (Roomvent 2004), Coimbra, Portugal, September 5–8, 2004. [Google Scholar]
  26. E. Conceição and M. Lúcio, “Numerical study of thermal response of school buildings in summer conditions,” In Proceedings of the 8th International Conference and Exhibition on Healthy Buildings (HB 2006), Lisbon, Portugal, June 4–8, 2006. [Google Scholar]
  27. Portaria 353-A, Requisitos de ventilação e qualidade do ar interior. Diário da República n.º 235/2013, 1º Suplemento, Série I de 2013–12–04, 2013. (in Portuguese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.