Open Access
Issue
E3S Web Conf.
Volume 247, 2021
International Conference on Efficient Production and Processing (ICEPP-2021)
Article Number 01053
Number of page(s) 4
DOI https://doi.org/10.1051/e3sconf/202124701053
Published online 05 April 2021
  1. A.M. Uzdin, T.A. Sandovich, S.A. Al-Nasser-Mohamad, Fundamentals of the theory of seismic resistance and earthquake-resistant construction of buildings and structures, St. Petersburg: VNIIG n.a. Vedeneev, P. 176 (1993). [Google Scholar]
  2. N.G. Seregin and V.I. Zaprudnov, Improving the bearing capacity of foundations soils by cementation, Forestry Bulletin, Vol. 24, No. 5, pp. 104–108 (2020). [Google Scholar]
  3. Injection chemical hardening of soils. Thermal hardening of soils: typical technological map, St. Petersburg. (2009). [Google Scholar]
  4. M.N. Ibragimov, Hardening of soils by injection of cement mortars: monograph, Moscow: ASV Publishing House, 254 p. (2012). [Google Scholar]
  5. E.S. Voznesenskaya, V.A. Ermolaev, A.I. Osokin, S.V. Tatarinov, Strengthening the foundations of buildings and structures by hydraulic fracturing using collar technology, Foundations, bases and soil mechanics, no. 4, pp. 19–23 (2014). [Google Scholar]
  6. M.I. Bazhenov, Compositions based on finely dispersed binders for injection hardening of soils and underground parts of buildings: Thesis for the degree of Cand. of Tech. Sciences: Moscow, 127 p. (2012). [Google Scholar]
  7. F. Bouchelaghem, Multi-scale modelling of the permeability evolution of fine sands during cement suspension grouting with filtration, Computers and Geotechnics, Vol. 36, Issue 6, Pp. 1058–1071 (2009) [Google Scholar]
  8. M.N. Ibragimov, V.V. Semkin, A.V. Shaposhnikov, Some problems of soil hardening with microcement solutions, Academia: Architecture and Construction, no. 4, pp. 114–120 (2016). [Google Scholar]
  9. B. Ayati, C. Molineux, D. Newport, C. Cheeseman, Manufacture and performance of lightweight aggregate from waste drill cuttings, Journal of cleaner production, V. 208, pp. 252–260 (2019). [Google Scholar]
  10. K. Piszcz-Karas, M. Klein, J. Hupka, J. Luczak, Utilization of shale cuttings in production of lightweight aggregates, Journal of environmental management, V. 231, pp. 232–240 (2019). [PubMed] [Google Scholar]
  11. A.A. Yusupova, R.T. Akhmetova, L.N. Shafigullin, Sulfur Composite Materials Based on Sulfide Containing Industrial Waste, Materials Engineering and Technologies for Production and Processing III Solid State Phenomena, Vol. 265, Pp. 33–38 (2017). [Google Scholar]
  12. A.A. Yusupova, A.A. Bobryshev, A.A. Treschev, Development of Sulfur and Silicon Dioxide Activation Method in the Sulfur Concrete Technology, Materials Engineering and Technologies for Production and Processing IV Solid State Phenomena, Vol. 284, P. 1114–1118 (2018). [Google Scholar]
  13. A.A. Yusupova, V.T. Erofeev, Bobryshev A.A., Activation of sulfur and opal-cristobalite-tridymite phase in sulfur concrete technology, IOP Conf. Series: Materials Science and Engineering, Vol. 463, P. 1–6 (2018). [Google Scholar]
  14. S.Y. Efremova, N.I. Zubrev, M.I. Panfilova, T.V. Matveyeva, Composite systems using ash from burning production waste, IOP Conference Series: Earth and Environmental Science, 337(1) (2019). [Google Scholar]
  15. N.I. Zubrev, M.V. Ustinova, M.A. Zhuravleva, M.I. Panfilova, S.Y. Efremova, Obtaining composite solutions with the addition of ash from the burning of fuel oil, Ecology and Industry of Russia, 24 (3), 10–13 (2020) [Google Scholar]
  16. M.I. Panfilova, N.I. Zubrev, S.Y. Efremova, M.I. Yakhkind, Strengthening of water-saturated soils of the bases of underground structures with composite mortars modified by industrial waste, boehmite, Case Studies in Construction Materials, 12 (2020). [Google Scholar]
  17. M.I. Panfilova, N.I. Zubrev, V.P. Gorbachevskii, S.Y. Efremova, The renewal of the bearing capacity of rubble masonry by the composite mortar, Journal of Physics: Conference Series, 1425(1) (2020). [Google Scholar]
  18. M. Panfilova, N. Zubrev, O. Novoselova, S. Efremova, Comparative analysis of strength characteristics of grouting mortars, IOP Conference Series-Materials Science and Engineering: XXI International Scientific Conference on Advanced in Civil Engineering Construction-The Formation of Living Environment (FORM), Vol.: 365, 032038 (2018). [Google Scholar]
  19. M. Panfilova, N. Zubrev, O. Novoselova, S. Efremova, Composite grouting mortar based on 3D-NKM-nanocrystalline inoculant, MATEC Web of Conferences: XXVII Russian-Polish-Slovak (R-S-P) Seminar on Theoretical Foundation of Civil Engineering, Vol. 196, 04061 (2018). [Google Scholar]
  20. M.V. Ustinova, N.I. Zubrev, M.I. Panfilova, O.V. Novoselova, S.Y. Efremova, M.A. Zhuravleva, The preparation of composite mortars with the addition of ash from burning of used sleepers, Ecology and Industry of Russia, 22 (5), 36–40 (2018) [Google Scholar]
  21. S.Y. Efremova, M.I. Panfilova, N.I. Zubrev, O.V. Novoselova, Kinetics of structure formation of a composite mortar with nano-additives based on aluminium, E3S Web of Conferences, 16 (2020). [Google Scholar]
  22. M. Panfilova, New construction: Zero cycle aspects, modern methods and promising materials, E3S Web of Conferences, 138, 02018 (2019). [Google Scholar]
  23. K.A. Nurbaturov, N.V. Bachilova, I.M. Deux, V.S. Lysenko, T.A. Zakharova, Solution of environmental problems of Western Kazakhstan using nanotechnologies, Bulletin of the National Engineering Academy of the Republic of Kazakhstan, No. 1 (27), pp. 115–116 (2008). [Google Scholar]
  24. I.A. Solomin, Industrial waste is a promising raw material for the production of building materials, Industrial and civil construction, No. 1, pp. 20–23 (2014). [Google Scholar]
  25. G. Bishimbayeva, D. Zhumabayeva, Sh. Umbetova, Perspective applications of sulfur polymer composites, Industrial Technology and Engineering, V. 2(19), pp. 16–23 (2016). [Google Scholar]
  26. J. Moon, P.D. Kalb, L. Milian, P.A. Northrup, Characterization of a sustainable sulfur polymer concrete using activated fillers, Cement and Concrete Composites, Vol. 67., P. 20–29 (2016). [Google Scholar]
  27. K. Pushkarova, K. Kaverin, D. Gadayuchyk, Modified Light Concrete of High Strength, MATEC Web of Conferences, Vol. 230, 03015 (2018). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.