Welding procedure research of white copper heat exchanger

Jiang Chengjun; Fan Gaoping; Xue Xiaolong; Zhang Xiaoli; Du Yannan

doi:10.1051/e3sconf/202126702049

All issues

Volume 267 (2021)

E3S Web Conf., 267 (2021) 02049

References

Open Access

Issue		E3S Web Conf. Volume 267, 2021 7^th International Conference on Energy Science and Chemical Engineering (ICESCE 2021)


Article Number		02049
Number of page(s)		5
Section		Environmental Chemistry Research and Chemical Preparation Process
DOI		https://doi.org/10.1051/e3sconf/202126702049
Published online		04 June 2021

Xu Weipu. (2009) Qualification and analysis for welding process of tube-sheet heat exchanger. Engineering equipment technology, 30 (3): 25–26. [Google Scholar]
Yang Yanhui. (2012) Materials and welding process of Cu-Ni alloy heat exchanger. Petroleum chemical industry, 2: 35–38. [Google Scholar]
Zhang Zhongke, Zheng Jianghui, Zhao Zaolong, etc. (2021) Microstructure and mechanical properties of BFe10-1-1 white copper joint by FSW. Hot working technology, 50 (7): 31–35. [Google Scholar]
Li Chubao. (2010) Application and improvement of GTAW technology. Modern welding, 12: 83–852. [Google Scholar]
Ze Xiuqin, Zhong Janping, Du Zhanwei, etc. (2012) Welding procedure of Φ159 ×5 BFe10-1-1 white copper tubes. Science and technology information, 6: 53–54. [Google Scholar]
Zhang Yong. (2015) Welding procedure test and application of copper-nickel alloy heat exchanger with high flux. Petroleum and chemical equipment, 18 (11): 5–8. [Google Scholar]
Lu Niya, Gao Lei, Zhang Yinyin. (2014) Study on welding technology of brass heat exchanger tube and shell. Contemporary chemical industry, 43 (6): 57–61. [Google Scholar]
Metallographic Group of Luoyang Copper Processing Plant. (2010) Metallographic atlas of copper and copper alloys. Metallurgical industry Press, Beijing. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Xu Weipu. (2009) Qualification and analysis for welding process of tube-sheet heat exchanger. Engineering equipment technology, 30 (3): 25–26. [Google Scholar]

[2] Yang Yanhui. (2012) Materials and welding process of Cu-Ni alloy heat exchanger. Petroleum chemical industry, 2: 35–38. [Google Scholar]

[3] Zhang Zhongke, Zheng Jianghui, Zhao Zaolong, etc. (2021) Microstructure and mechanical properties of BFe10-1-1 white copper joint by FSW. Hot working technology, 50 (7): 31–35. [Google Scholar]

[4] Li Chubao. (2010) Application and improvement of GTAW technology. Modern welding, 12: 83–852. [Google Scholar]

[5] Ze Xiuqin, Zhong Janping, Du Zhanwei, etc. (2012) Welding procedure of Φ159 ×5 BFe10-1-1 white copper tubes. Science and technology information, 6: 53–54. [Google Scholar]

[6] Zhang Yong. (2015) Welding procedure test and application of copper-nickel alloy heat exchanger with high flux. Petroleum and chemical equipment, 18 (11): 5–8. [Google Scholar]

[7] Lu Niya, Gao Lei, Zhang Yinyin. (2014) Study on welding technology of brass heat exchanger tube and shell. Contemporary chemical industry, 43 (6): 57–61. [Google Scholar]

[8] Metallographic Group of Luoyang Copper Processing Plant. (2010) Metallographic atlas of copper and copper alloys. Metallurgical industry Press, Beijing. [Google Scholar]