Open Access
Issue
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
Article Number 01147
Number of page(s) 6
DOI https://doi.org/10.1051/e3sconf/202130901147
Published online 07 October 2021
  1. Fatoba, O.S., Akinlabi, E.T., Akinlabi, S.A., Numerical Investigation of Laser Deposited Al-Based Coatings on Ti-6Al-4V Alloy. 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies 85 (2018) doi: 10.1109/ICMIMT.2018.8340426. [Google Scholar]
  2. Fatoba O.S., Akinlabi S.A., Gharehbaghi R., Akinlabi E.T (2018). Microstructural Analysis, Microhardness and Wear Resistance Properties of Quasicrystalline Al-Cu-Fe Coatings on Ti-6Al-4V Alloy. Materials Express Research. 5(6), 1–14. https://doi.org/10.1088/2053-1591/aaca70. [Google Scholar]
  3. C. Leyens and M. Peters, Titanium And Titanium Alloys, Fundamentals And Applications., WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, ISBN: 3-527-30534-3, 2003. [Google Scholar]
  4. J. Williams and G. Lutjering, “Chapter 5: Alpha+Beta Alloys,” Titanium, pp. 178–232, 2003. [Google Scholar]
  5. Adesina O.S; Popoola A.P.I; Fatoba O.S., Laser Surface Modification-A focus on the Wear Degradation of Titanium Alloy, InTech (2016), DOI: http://www.intechopen.com/books/fiber-laser/ [Google Scholar]
  6. Fatoba O.S., Adesina O.S. Popoola A.P.I., The International Journal of Advanced Manufacturing Technology. 97(5), 2341 (2018) [Google Scholar]
  7. Gharehbaghi, R., Fatoba, O.S., Akinlabi, E.T. International Conference on Mechanical and Intelligent Manufacturing Technologies, 31 doi: 10.1109/ICMIMT.2018.8340416. (2018) [Google Scholar]
  8. Fu, Y., Zhang, X.-C., Sui, J.-F., Tu, S.-T., Xuan, F.-Z. & Wang, Z.-D., Optics & Laser Technology, 67(1), 78 (2015) [Google Scholar]
  9. Weng, F., Chen, C. & Yu, H. (2014a). Research status of laser cladding on titanium and its alloys: a review. Materials & Design, 58:412–425. [Google Scholar]
  10. Fatoba O.S; Akinlabi, E. T., Makhatha, M.E. Materials Today: Proceedings. 5(9), 18368 (2018) [Google Scholar]
  11. M.C. Obiegbu; O.S. Fatoba; E.T. Akinlabi., S.A. Akinlabi Materials Express Research, 6(4) 1 (2019) [Google Scholar]
  12. M. F. Erinosho, E. T. Akinlabi, O. Johnson and G. Owolabi, Effect Of Scanning Speed On The Material Characterisation Of Laser Deposited Titanium Alloy And Copper, (2015) [Google Scholar]
  13. J. Dai, F. Zhang, A. Wang, H. Yu and C. Chen, “Microstructure And Properties Of Ti-Al Coating And Ti-Al-Si System Coatings On TI-6Al-4V,” Surface & Coatings Technology, (2017) [Google Scholar]
  14. M. F. Erinosho and E. T. Akinlabi, Effect Of Laser Power On The Microstructural Behaviour And Strength Of Modified Laser Deposited Ti6Al4V+Cu Alloy For Medical Application, Johannesburg: Department Of Mechanical Engineering Science, University Of Johannesburg, (2015) [Google Scholar]
  15. G. Yuan, Z. Li, Y. Lou and X. Zhang, Materials Science And Engineering A, 280, 108 (2000) [Google Scholar]
  16. R. M. Mahamood, E. T. Akinlabi, M. Shukla and S. Pityana, Proceedings Of The International MultiConference Of Engineers And Computer Scientists, (2014) [Google Scholar]
  17. E. Akinlabi, M. A. Tayob and F. Pietra, “Experimental And Numerical Analysis Of Geometrical Properties Of Laser Metal Deposited Titanium,” 25, 1 (2016) [Google Scholar]
  18. R. M. Mahamood, E. T. Akinlabi, M. Shukla and S. Pityana, Proceedings Of The International MultiConference Of Engineers And Computer Scientists, (2013) [Google Scholar]
  19. T. Wang, Y. Zhu, S. Zhang, H. Tang and H. Wang, “Grain Morphology Evolution Behavior Of Titanium Alloy Components During Laser Melting Deposition Additive Manufacturing,” Journal Of Alloys And Compounds, 632, 505 (2015) [Google Scholar]
  20. Y. Yang, Y. Liu, J. Chen, H. Wang, Z. Zhang, Y. Lu, S. Wu and J. Lin, Materials Science & Engineering A, 707, 548 (2017) [Google Scholar]
  21. M. F. Erinosho and E. T. Akinlabi, “Influence Of Laser Power On The Surfacing Microstructures And Microhardness Properties Of Ti-6Al-4V-Cu Alloys Using The Ytterbium Fiber Laser,” (2016) [Google Scholar]
  22. R. M. Mahamood and E. T. Akinlabi, 6th International Conference Of Materials Processing And Characterization, (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.