Experimental investigation of strength properties of 3D printed ABS composites

Abdul Quader Shurjeel; Narendra Pothula; Eshwaraiah Punna

doi:10.1051/e3sconf/202130901148

All issues

Volume 309 (2021)

E3S Web Conf., 309 (2021) 01148

References

Open Access

Issue		E3S Web Conf. Volume 309, 2021 3^rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)


Article Number		01148
Number of page(s)		8
DOI		https://doi.org/10.1051/e3sconf/202130901148
Published online		07 October 2021

Boschetto, Alberto, and Luana Bottini. “Accuracy prediction in fused deposition modeling.” The international journal of advanced manufacturing technology 73(5) 913 (2014) [Google Scholar]
De Laurentis, Kathryn J., and Constantinos Mavroidis. “Rapid fabrication of a non-assembly robotic hand with embedded components.” Assembly Automation (2004). [Google Scholar]
Krache, Rachida, and Ismahane Debbah., Materials Sciences and Applications 2(5) 404 (2011) [Google Scholar]
Zhang, Hui, Zhong Zhang, and Claudia Breidt. Composites science and technology 64(13), 2021 (2004) [Google Scholar]
Liu, Yuan, and W. L. Yao. Int. J. Simul. Syst. Sci. Technol. 17, 25 (2016) [Google Scholar]
Kamaal, M., M. Anas, H. Rastogi, N. Bhardwaj, and A. Rahaman, Progress in Additive Manufacturing 6(1), 63 (2021) [Google Scholar]
Kannan, Sridharan, and Manoharan Ramamoorthy. Materials Research Express 7(1), 015341 (2020) [Google Scholar]
Ning, Fuda, Weilong Cong, Yingbin Hu, and Hui Wang., Journal of Composite Materials 51(4), 451 (2017) [Google Scholar]
Cantrell, Jason T., Sean Rohde, David Damiani, Rishi Gurnani, Luke DiSandro, Josh Anton, Andie Young, Rapid Prototyping Journal 15(1), 2004 (2017) [Google Scholar]
Uddin, M. Sidek, M. F. R. Sidek, M. A. Faizal, Reza Ghomashchi, and Alokesh Pramanik., Journal of Manufacturing Science and Engineering 139(8), 081018 (2017) [Google Scholar]
Fernandez-Vicente, Miguel, Wilson Calle, Santiago Ferrandiz, and Andres Conejero., 3D printing and additive manufacturing 3(3), 183 (2016) [Google Scholar]
Rankouhi, Behzad, Sina Javadpour, Fereidoon Delfanian, and Todd Letcher., Journal of Failure Analysis and Prevention 16(3), 467 (2016) [Google Scholar]
Christiyan, KG Jaya, U. Chandrasekhar, and K. Venkateswarlu, Materials Science and Engineering, 114(1), 012109 (2016) [Google Scholar]
Durgun, Ismail, and Rukiye Ertan. “Experimental investigation of FDM process for improvement of mechanical properties and production cost.” Rapid Prototyping Journal (2014) [PubMed] [Google Scholar]
Hill, Nevin, and Mehrdad Haghi. “Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate.” Rapid Prototyping Journal (2014) [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Boschetto, Alberto, and Luana Bottini. “Accuracy prediction in fused deposition modeling.” The international journal of advanced manufacturing technology 73(5) 913 (2014) [Google Scholar]

[2] De Laurentis, Kathryn J., and Constantinos Mavroidis. “Rapid fabrication of a non-assembly robotic hand with embedded components.” Assembly Automation (2004). [Google Scholar]

[3] Krache, Rachida, and Ismahane Debbah., Materials Sciences and Applications 2(5) 404 (2011) [Google Scholar]

[4] Zhang, Hui, Zhong Zhang, and Claudia Breidt. Composites science and technology 64(13), 2021 (2004) [Google Scholar]

[5] Liu, Yuan, and W. L. Yao. Int. J. Simul. Syst. Sci. Technol. 17, 25 (2016) [Google Scholar]

[6] Kamaal, M., M. Anas, H. Rastogi, N. Bhardwaj, and A. Rahaman, Progress in Additive Manufacturing 6(1), 63 (2021) [Google Scholar]

[7] Kannan, Sridharan, and Manoharan Ramamoorthy. Materials Research Express 7(1), 015341 (2020) [Google Scholar]

[8] Ning, Fuda, Weilong Cong, Yingbin Hu, and Hui Wang., Journal of Composite Materials 51(4), 451 (2017) [Google Scholar]

[9] Cantrell, Jason T., Sean Rohde, David Damiani, Rishi Gurnani, Luke DiSandro, Josh Anton, Andie Young, Rapid Prototyping Journal 15(1), 2004 (2017) [Google Scholar]

[10] Uddin, M. Sidek, M. F. R. Sidek, M. A. Faizal, Reza Ghomashchi, and Alokesh Pramanik., Journal of Manufacturing Science and Engineering 139(8), 081018 (2017) [Google Scholar]

[11] Fernandez-Vicente, Miguel, Wilson Calle, Santiago Ferrandiz, and Andres Conejero., 3D printing and additive manufacturing 3(3), 183 (2016) [Google Scholar]

[12] Rankouhi, Behzad, Sina Javadpour, Fereidoon Delfanian, and Todd Letcher., Journal of Failure Analysis and Prevention 16(3), 467 (2016) [Google Scholar]

[13] Christiyan, KG Jaya, U. Chandrasekhar, and K. Venkateswarlu, Materials Science and Engineering, 114(1), 012109 (2016) [Google Scholar]

[14] Durgun, Ismail, and Rukiye Ertan. “Experimental investigation of FDM process for improvement of mechanical properties and production cost.” Rapid Prototyping Journal (2014) [PubMed] [Google Scholar]

[15] Hill, Nevin, and Mehrdad Haghi. “Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate.” Rapid Prototyping Journal (2014) [PubMed] [Google Scholar]