Open Access
Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
---|---|---|
Article Number | 01174 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/202130901174 | |
Published online | 07 October 2021 |
- Chen, Bo, and Wenjia Liu. “Mobile agent computing paradigm for building a flexible structural health monitoring sensor network.” Computer-Aided Civil and Infrastructure Engineering 25.7 (2010): 504–516. [Google Scholar]
- Dworakowski, Ziemowit, et al. “Vision-based algorithms for damage detection and localization in structural health monitoring.” Structural Control and Health Monitoring 23.1 (2016): 35–50. [Google Scholar]
- Sony, Sandeep, Shea Laventure, and Ayan Sadhu. “A literature review of next-generation smart sensing technology in structural health monitoring.” Structural Control and Health Monitoring 26.3 (2019): e2321. [Google Scholar]
- Pham, Thong M., and Hong Hao. “Behavior of fiber-reinforced polymer-strengthened reinforced concrete beams under static and impact loads.” International Journal of Protective Structures 8.1 (2017): 3–24. [Google Scholar]
- Klyuev, Sergey V., et al. “Experimental study of fiber-reinforced concrete structures.” Materials Science Forum. Vol. 945. Trans Tech Publications Ltd, 2019. [Google Scholar]
- Kang, Min-Chang, Doo-Yeol Yoo, and Rishi Gupta. “Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete.” Construction and Building Materials 266 (2021): 121117. [Google Scholar]
- Siddiqui, Nadeem A., et al. “Reliability Assessment of HFRC Slabs Against Projectile Impact.” International Journal of Concrete Structures and Materials 12.1 (2018): 1–11. [Google Scholar]
- Sharma, Raju, and Prem Pal Bansal. “Behavior of RC exterior beam column joint retrofitted using UHP-HFRC.” Construction and Building Materials 195 (2019): 376–389. [Google Scholar]
- Yao, Wenjin, et al. “Blast-resistant performance of hybrid fiber-reinforced concrete (hfrc) panels subjected to contact detonation.” Applied Sciences 10.1 (2020): 241. [Google Scholar]
- Junwei, Zhang, Li Shijie, and Peng Hongjian. “Experimental investigation of multiscale hybrid fibres on the mechanical properties of high-performance concrete.” Construction and Building Materials 299 (2021): 123895. [Google Scholar]
- Koniki, Srikanth, et al. “Mechanical behavior of triple-blended hybrid fiber-reinforced concrete: an experimental and numerical study.” Innovative Infrastructure Solutions 6.3 (2021): 1–14. [Google Scholar]
- Banthia, Nemkumar, et al. “Fiber synergy in Hybrid Fiber Reinforced Concrete (HyFRC) in flexure and direct shear.” Cement and Concrete Composites 48 (2014): 91–97. [Google Scholar]
- Nguyen, Wilson, et al. “Electrochemical polarization and impedance of reinforced concrete and hybrid fiber-reinforced concrete under cracked matrix conditions.” Electrochimica Acta 271 (2018): 319–336. [Google Scholar]
- Sun, Linzhu, et al. “Stress strain behavior of hybrid steel-PVA fiber reinforced cementitious composites under uniaxial compression.” Construction and Building Materials 188 (2018): 349–360. [Google Scholar]
- Shaaban, Ibrahim G., et al. “Experimental and theoretical behaviour of reinforced concrete beams containing hybrid fibres.” Structures. Vol. 32. Elsevier, 2021. [Google Scholar]
- Li, K. F., et al. “Effects of hybrid fibers on workability, mechanical, and time-dependent properties of high strength fiber-reinforced self-consolidating concrete.” Construction and Building Materials 277 (2021): 122325. [Google Scholar]
- Said, Mohamed, et al. “Experimental and analytical investigation of high performance concrete beams reinforced with hybrid bars and polyvinyl alcohol fibers.” Construction and Building Materials 259 (2020): 120395. [Google Scholar]
- Liu, Fangyu, Wenqi Ding, and Yafei Qiao. “Experimental investigation on the tensile behavior of hybrid steel-PVA fiber reinforced concrete containing fly ash and slag powder.” Construction and Building Materials 241 (2020): 118000. [Google Scholar]
- Li, Yi, et al. “Pore structure and splitting tensile strength of hybrid Basalt–Polypropylene fiber reinforced concrete subjected to carbonation.” Construction and Building Materials 297 (2021): 123779. [Google Scholar]
- Koniki, Srikanth, and D. Ravi Prasad. “Mechanical properties and constitutive stress–strain behaviour of steel fiber reinforced concrete under uni-axial stresses.” Journal of Building Pathology and Rehabilitation 4.1 (2019): 1–8. [Google Scholar]
- Fares, Galal, Mahmoud Hamad Albaroud, and M. Iqbal Khan. “Fine limestone dust from ornamental stone factories: a potential filler in the production of High-Performance Hybrid Fiber-Reinforced Concrete.” Construction and Building Materials 262 (2020): 120009. [Google Scholar]
- Koniki, Srikanth, and D. Ravi Prasad. “Influence of hybrid fibres on strength and stress-strain behaviour of concrete under uni-axial stresses.” Construction and Building Materials 207 (2019): 238–248.. [Google Scholar]
- Koniki, Srikanth, and P. D. Ravi. “A study on mechanical properties and stress-strain response of high strength concrete reinforced with polypropylene–polyester hybrid fibres.” Cement, Wapno, Beton 1 (2018): 67–77. [Google Scholar]
- Özkan, Şükrü, and Fuat Demir. “The hybrid effects of PVA fiber and basalt fiber on mechanical performance of cost effective hybrid cementitious composites.” Construction and Building Materials 263 (2020): 120564. [Google Scholar]
- Teng, Susanto, Vahid Afroughsabet, and Claudia P. Ostertag. “Flexural behavior and durability properties of high performance hybrid-fiber-reinforced concrete.” Construction and Building Materials 182 (2018): 504–515. [Google Scholar]
- Son, Minjae, et al. “Effects of the strain rate and fiber blending ratio on the tensile behavior of hooked steel fiber and polyvinyl alcohol fiber hybrid reinforced cementitious composites.” Cement and Concrete Composites 106 (2020): 103482. [Google Scholar]
- Pakravan, H. R., M. Latifi, and M. Jamshidi. “Hybrid short fiber reinforcement system in concrete: A review.” Construction and building materials 142 (2017): 280–294. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.