Open Access
Issue
E3S Web Conf.
Volume 312, 2021
76th Italian National Congress ATI (ATI 2021)
Article Number 07023
Number of page(s) 9
Section Propulsion Systems for Sustainable Mobility
DOI https://doi.org/10.1051/e3sconf/202131207023
Published online 22 October 2021
  1. https://ec.europa.eu/growth/sectors/automotive/environment-protection/emissions_en [Google Scholar]
  2. REGULATION EU 2019/631 of The European Parliament and of the Council of 17 April 2019 setting CO2 emission performance standards for new passenger cars and for new light commercial vehicles, and repealing Regulations (EC), No 443/2009 and (EU) No 510/2011 (recast). [Google Scholar]
  3. Regulation (Ec) No 715/2007 Of The European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair an d maintenance information. [Google Scholar]
  4. Guohui Zhu, Jingping Liu, Jianqin Fu, Zhengxin Xu, Qiyi Guo, He Zhao, Experimental study on combustion and emission characteristics of turbocharged gasoline direct injection (GDI) engine under cold start new European driving cycle (NEDC), Fuel, Volume 215, 2018, Pages 272–284, ISSN 0016-2361, https://doi.org/10.1016/j.fuel.2017.10.048 [Google Scholar]
  5. Gumus, M., “Reducing Cold-Start Emission from Internal Combustion Engines by Means of Thermal Energy Storage System,” Applied Thermal Engineering, Vol. 29, No. 4, pp. 652–660, 2009. [Google Scholar]
  6. Ali Usman, Cheol Woo Park - Transient Lubrication of Piston Compression Ring during Cold Start-Up of SI Engine - International Journal of Precision Engineering and Manufacturing-Green Technology January 2016, Volume 3, Issue 1, pp 81–90. [Google Scholar]
  7. Shayler, P., Cheng, L., Li, Q., and Wahab, E., "A Modified Oil Lubrication System with Flow Control to Reduce Crankshaft Bearing Friction in a Litre 4 Cylinder Diesel Engine," SAE Technical Paper 2016-01-1045, 2016, DOI: 10.4271/2016-01-1045. [Google Scholar]
  8. Zammit, J., Shayler, P., Gardiner, R. and Pegg, I., "Investigating the Potential to Reduce Crankshaft Main Bearing Friction During Engine Warm-up by Raising Oil Feed Temperature," SAE Int. J. Engines 5(3):2012, DOI: 10.4271/2012-01-1216. [Google Scholar]
  9. Lingjian Chen, Baocheng Du, Li Zhang, Jinlin Han, Bin Chen, Xiaoqi Zhang, Yang Li, Jinbo Zhang, Analysis of real-driving emissions from light-duty gasoline vehicles: A comparison of different evaluation methods with considering cold-start emissions, Atmospheric Pollution Research, Volume 12, Issue 5, 2021, 101065, ISSN 1309-1042, https://doi.org/10.1016/j.apr.2021.101065 [Google Scholar]
  10. C.D. Rakopoulos, A.M. Dimaratos, and E.G. Giakoumis - Investigation of turbocharged diesel engine operation, exhaust emissions, and combustion noise radiation during starting under cold, warm, and hot conditions - Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering September 2011 vol. 225 no. 9 1118–1133 [Google Scholar]
  11. Ali Zare, Timothy A. Bodisco, Mohammad Jafari, Puneet Verma, Liping Yang, Meisam Babaie, M.M. Rahman, Andrew Banks, Zoran D. Ristovski, Richard J. Brown, Svetlana Stevanovic, Cold-start NOx emissions: Diesel and waste lubricating oil as a fuel additive, Fuel, Volume 286, Part 2, 2021, 119430, ISSN 0016-2361, https://doi.org/10.1016Zj.fuel.2020.119430 [Google Scholar]
  12. Alireza Naderi, Ali Qasemian, Mohammad Hasan Shojaeefard, Saman Samiezadeh, Mostafa Younesi, Ali Sohani, Siamak Hoseinzadeh, A smart load-speed sensitive cooling map to have a high-performance thermal management system in an internal combustion engine, Energy, Volume 229, 2021, 120667, ISSN 0360-5442, https://doi.org/10.1016/j.energy.2021.120667 [Google Scholar]
  13. Mahmoud K. Ashour, Yehia A. Eldrainy, Ahmed E. Elwardany, Effect of cracked naphtha/biodiesel/diesel blends on performance, combustion and emissions characteristics of compression ignition engine, Energy, Volume 192, 2020, 116590, ISSN 0360-5442, https://doi.org/10.1016/j.energy.2019.116590 [Google Scholar]
  14. Vicente Macian, Bernardo Tormos, Vicente Bermùdez, Sophia Bastidas, Development of a floating liner test rig and lubrication model for the study of the piston compression ring friction force under fully flooded and starved lubrication, Tribology International, Volume 160, 2021, 107034, ISSN 0301-679X, https://doi.org/10.1016/j.triboint.2021.107034 [Google Scholar]
  15. Emma Frosina, Adolfo Senatore, Dario Buono, Luigi Arnone, A Critical Analysis on the Lubrication Circuit of a Non-road Diesel Engine by Adopting a 3D and 1D Approaches, Energy Procedia, Volume 81, 2015, Pages 794–804, ISSN 1876-6102, https://doi.org/10.1016/j.egypro.2015.12.086 [Google Scholar]
  16. D. Di Battista, R. Cipollone, Experimental and numerical assessment of methods to reduce warm up time of engine lubricant oil, Applied Energy, Volume 162, 15 January 2016, Pages 570–580, ISSN 0306-2619. [Google Scholar]
  17. Hamedi, M.R., Doustdar, O., Tsolakis, A., Hartland, J. Thermal energy storage system for efficient diesel exhaust aftertreatment at low temperatures, (2019) Applied Energy, pp. 874–887. [Google Scholar]
  18. Sara, H., Chalet, D., Cormerais, M., Hetet, J.-F., Evaluation of hot water storage strategy in internal combustion engine on different driving cycles using numerical simulations, (2018) Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232 (8), pp. 1019–1035. [Google Scholar]
  19. Alireza Naderi, Ali Qasemian, Mohammad Hasan Shojaeefard, Saman Samiezadeh, Mostafa Younesi, Ali Sohani, Siamak Hoseinzadeh, A smart load-speed sensitive cooling map to have a high-performance thermal management system in an internal combustion engine, Energy, Volume 229, 2021, 120667, ISSN 0360-5442, https://doi.org/10.1016/j.energy.2021.120667 [Google Scholar]
  20. Amireh Nourbakhsh, Morteza Bayareh, Arash Mohammadi, Sadegh Jahantighi, Effect analysis on boiling heat transfer performance of an internal combustion engine at the shutdown time, International Journal of Thermal Sciences, Volume 129, 2018, Pages 365–374, ISSN 1290-0729, https://doi.org/10.1016/j.ijthermalsci.2018.03.022 [Google Scholar]
  21. Ashraf Mimi Elsaid, Experimental study on the heat transfer performance and friction factor characteristics of Co3O4 and Al2O3 based H2O/(CH2OH)2 nanofluids in a vehicle engine radiator, International Communications in Heat and Mass Transfer, Volume 108, 2019, 104263, ISSN 0735-1933, https://doi.org/10.1016/j.icheatmasstransfer.2019.05.009 [Google Scholar]
  22. Jingjie Cao, Ming Jia, Bo Niu, Yachao Chang, Zhen Xu, Hong Liu, Establishment of an improved heat transfer model based on an enhanced thermal wall function for internal combustion engines operated under different combustion modes, Energy Conversion and Management, Volume 195, 2019, Pages 748–759, ISSN 0196-8904 [Google Scholar]
  23. Haoqi Yang, Gequn Shu, Hua Tian, Xiaonan Ma, Tianyu Chen, Peng Liu, Optimization of thermoelectric generator (TEG) integrated with three-way catalytic converter (TWC) for harvesting engine’s exhaust waste heat, Applied Thermal Engineering, Volume 144, 2018, Pages 628–638, ISSN 1359-4311, https://doi.org/10.1016/j.applthermaleng.2018.07.091 [Google Scholar]
  24. D. Vittorini, D. Di Battista, R. Cipollone, Engine oil warm-up through heat recovery on exhaust gases - Emissions reduction assessment during homologation cycles, Thermal Science and Engineering Progress, Volume 5, 2018, Pages 412–421, ISSN 2451-9049, https://doi.org/10.1016/j.tsep.2018.01.010 [Google Scholar]
  25. D. Di Battista, F. Fatigati, R. Carapellucci, R. Cipollone, An improvement to waste heat recovery in internal combustion engines via combined technologies, Energy Conversion and Management, Volume 232, 2021, 113880, ISSN 0196-8904, https://doi.org/10.1016/j.enconman.2021.113880 [Google Scholar]
  26. Shu, G., Hu, C., Tian, H., Li, X., Yu, Z., Wang, M. Analysis and optimization of coupled thermal management systems used in vehicles, (2019) Energies, 12 (7), art. no. en12071265. [Google Scholar]
  27. Jafari, S., Dunne, J. F., Langari, M., Yang, Z., Pirault, J.-P., Long, C. A., & Thalackottore Jose, J. (2017). A review of evaporative cooling system concepts for engine thermal management in motor vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231(8), 1126–1143. https://doi.org/10.1177/0954407016674606 [Google Scholar]
  28. Di Battista, D., Vittorini, D., Fatigati, F., Cipollone, R., Technical review of opportunities to reduce the warm-up time of lubricant oil in a light-duty diesel engine, (2019) AIP Conference Proceedings, 2191, art. no. 020065, [Google Scholar]
  29. Di Battista, D., Cipollone, R., Fatigati, F., Engine oil Thermal Management: Oil Sump Volume Modification and Heating by Exhaust Heat during ICE Warm Up, (2018) SAE Technical Papers, 2018-April [Google Scholar]
  30. Di Battista, D., Cipollone, R., Improving engine oil warm up through waste heat recovery, (2018) Energies, 11 (1), art. no. 10, [Google Scholar]
  31. Di Battista, D., Carapellucci, R., Cipollone, R., Integrated evaluation of Inverted Brayton cycle recovery unit bottomed to a turbocharged diesel engine, (2020) Applied Thermal Engineering, 175, art. no. 115353 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.