Open Access
Issue
E3S Web Conf.
Volume 312, 2021
76th Italian National Congress ATI (ATI 2021)
Article Number 11016
Number of page(s) 11
Section Turbomachinery
DOI https://doi.org/10.1051/e3sconf/202131211016
Published online 22 October 2021
  1. M. Bohnet, Chem. Eng. Technol. 10, 113–125 (1987). [Google Scholar]
  2. M.R. Maghami, H. Hizam, C. Gomes, M.A. Radzi, M.I. Rezadad, and S. Hajighorbani, Renew. Sust. Energ. Rev. 59, 1307–1316 (2016). [Google Scholar]
  3. A. Suman, N. Casari, E. Fabbri, L. di Mare, F. Montomoli and M. Pinelli, Prog. Ener. Comb., 74, 103–151 (2019). [Google Scholar]
  4. A. Suman, N. Casari, E. Fabbri, L. di Mare, F. Montomoli and M. Pinelli, J Eng. Gas Turb. Power, 141, 032601 (2019). [Google Scholar]
  5. R. Kurz and K. Brun, J Eng. Gas Turb. Power, 134, 032401 (2012). [Google Scholar]
  6. A. Suman, R. Kurz, N. Aldi, M. Morini, K. Brun, M. Pinelli and P.R. Spina, J Eng. Gas Turb. Power, 138, 012603 (2016). [Google Scholar]
  7. A.D. Mezheritsky and A.V. Sudarev, The mechanism of fouling and the cleaning technique in application to flow parts of the power generation plant compressors, 90-GT-103, Proceedings of the ASME Turbo Expo, edit by ASME, NY (1990). [Google Scholar]
  8. C.A. Perullo, T. Lieuwen, J. Barron, D. Grace and L. Angello, Evaluation of air filtration options for an industrial gas turbine, GT2015-43736, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2015). [Google Scholar]
  9. A. Suman, M. Morini, N. Aldi, N. Casari, M. Pinelli and P.R. Spina, J Turbomach. 139, 041005 (2017). [Google Scholar]
  10. F.C. Mund and P. Pilidis, A review of gas turbine online washing systems, GT2004-53224, Proceedings of the ASME Turbo Expo, edit by ASME, NY (2004). [Google Scholar]
  11. U. Igie, P. Pilidis, D. Fouflias, K. Ramsden, and P. Laskaridis, J. Turbomach., 136, 101001 (2014). [Google Scholar]
  12. S76 - Performance and Operations Handbook. In The Australian Air Transport Pilot License (Helicopter); Civil Aviation Safety Authority, Australian Government: Woden, Australia (2013). [Google Scholar]
  13. F. Costabile, W. Birmili, S. Klose, T. Tuch, B. Wehner, A. Wiedensohler, U. Franck, K. Konig and A. Sonntag, Atmos. Chem. Phys. 9, 3163–3195 (2009). [Google Scholar]
  14. A. Vulpio, A. Suman, N. Casari, M. Pinelli, C. Appleby and S. Kyte, Washing effectiveness assessment of different cleaners on a small-scale multistage compressor, GT2021-59455, Proceedings of the ASME Turbo Expo edit by ASME, NY (2021). DOI: 10.1115/GT2021-59455 [Google Scholar]
  15. E. Syverud, and L.E. Bakken, J Turbomach., 129, pp. 136–142 (2007). [Google Scholar]
  16. Allison Gas Turbine. Operation and Maintenance manual. Turboshaft models 250C18, A., B & C. 15 September 1971, Rev. 16 June 1975. Detroit Diesel Allison, Division of General Motors Corporation, Indianapolis, IN 46206. [Google Scholar]
  17. A. Suman, A. Vulpio, A. Fortini, E. Fabbri, N. Casari, M. Merlin and M. Pinelli, Int. J. Heat Mass Transf., 165, 120632 (2021). [Google Scholar]
  18. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri, Nat. Methods, 9(7), 671 (2012). [Google Scholar]
  19. N. Casari, A. Fortini, M. Pinelli, A. Suman, A. Vulpio and N. Zanini, Measurement, Art. no. 110185. (2021) DOI: 10.1016/j.measurement.2021.110185 [Google Scholar]
  20. A. Vulpio, A. Suman, N. Casari, M. Pinelli, R. Kurz and K. Brun, K. J Eng. Gas Turb. Power, 143, 081005 (2021) [Google Scholar]
  21. A. Suman, A. Vulpio, N. Casari, M. Pinelli, R. Kurz and K. Brun, K. J Eng. Gas Turb. Power, 143, 081006 (2021) [Google Scholar]
  22. A. Suman, A. Vulpio, N. Casari, M. Pinelli, F. di Lillo and L. D'Amico, Powder Technol, 394, pp. 608–621 (2021) [Google Scholar]
  23. A. Suman, A. Vulpio, N. Casari and M. Pinelli, Powder Technol, 394, pp. 597–607 (2021) [Google Scholar]
  24. A. Suman, A. Vulpio, N. Casari and M. Pinelli, J Eng. Gas Turb. Power, GTP-21-1392 (2021). DOI: 10.1115/1.4051988 [Google Scholar]
  25. N. Aldi, N. Casari, M. Pinelli, A. Suman, A. Vulpio and P. Saccenti. Performance modification of an erosion-damaged large-sized, GT2021-59832, Proceedings of the ASME Turbo Expo edit by ASME, NY (2021). DOI: 10.1115/GT2021-59832 [Google Scholar]
  26. A. Vulpio, A. Suman, N. Casari and M. Pinelli, A quantitative approach for the estimation of the fouling rate on the stationary parts of a multistage test compressor, GT2021-59449, Proceedings of the ASME Turbo Expo edit by ASME, Ny (2021). DOI: 10.1115/GT2021-59449 [Google Scholar]
  27. A. Vulpio, A. Suman, N. Casari and M. Pinelli, Aerospace, 81, art. no. 8030081 (2021). [Google Scholar]
  28. N. Casari, M. Pinelli, P.R. Spina, A. Suman and A. Vulpio, J Eng. Gas Turb. Power, 143, 031020 (2021) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.